MCNOs/CdS双效光催化剂的制备及其性能研究

水热合成法制备了不同磁性纳米洋葱碳(MCNOs)负载量(0%、1%、3%、5%)的MCNOs/CdS光催化剂。并通过X射线衍射分析(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)、紫外可见光光谱(UV-Vis)、磁滞回线测定仪(VSM)对其进行表征,探究了MCNOs负载比例对催化剂在可见光下降解RhB性能及机理的影响。结果表明,MCNOs能有效提高CdS的光催化效果,复合3%MCNOs后降解率为96%,与纯CdS相比降解率提高了30%,磁性分析表明,其具有良好的顺磁性并能实现催化剂的有效回收。MCNOs/CdS在可见光下催化降解RhB的一级反应动力学直线有较好的拟合度,表明制备的催化剂有较好的催化活性。     

Multi-emissive 1D Cd(II) polymers with a biphenyl bridged bisazamacrocycle for ratiometric discrimination of nitroaromatics and selective visual detection of picric acid

Three one-dimensional ladder-like coordination polymers consisting of Cd₆ metalloring as the building unit, {[Cd₄LCl₄]·3H₂O}_n ( 1 ), {[Cd₃L(ClO₄)(H₂O)]ClO₄·3H₂O}_n ( 2 ), and {[Cd₆(L)₂(NO₃)₂(CH₃OH)(H₂O)](NO₃)₂·2CH₃OH·5H₂O}_n ( 3 ), were solvothermally constructed from a carboxylic functionalized bisazamacrocyclic ligand 4,4′-bis((4,7-bis(2-carboxyethyl)-1,4,7-triazacyclonon-1-yl)methyl)-1,1′-biphenyl (H₄L). These compounds dispersed in ethanol show the multiple emissions originating from the monomeric and intramolecularly overlapping biphenyl moieties which could be sensitively quenched by picric acid (PA) and 4-nitrophenol (4-NP) through the effective fluorescence resonance energy transfer process. The differential fluorescent responses of each compound on exposure to PA and 4-NP individually make the convenient ratiometric discrimination of two analytes based on the fluorescent intensity ratio (I₃₂₀/I₃₆₀) attainable, and 1 and 2 as ratiometric chemosensors for PA present a broad linear detection range from 4 to 300 μM with detection limits of 0.84 and 0.93 μM, respectively. Furthermore, the blue light emission of 1 under an ultraviolet lamp could be selectively quenched by PA even in the presence of all other interfering nitroaromatic pollutants, which empowers the fast visual detection of PA by naked eye.     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

A switchable ionic liquid with polarity swing-assisted regeneration properties used for the preconcentration of cadmium in biological samples

In the present study the cadmium (Cd) was determined in serum samples of psoriatic patients. The severity of psoriasis was evaluated according to criteria based on standard clinical diagnosis using Psoriasis Area Severity Index (PASI) score. In present study, an innovative tunable green solvent system based microextraction (TSS-ME) was applied for the enrichment of Cd in acid digested serum samples prior to determination with flame atomic absorption spectrometry. The hydrophobic complex of Cd-ammonium pyrrolidine thiocarbamate was extracted in a tunable solvent system which was prepared from a polybasic amine (N, N, N′, N′-tetramethyl-1, 4-diaminobutane), decanol and water system. The tunable green solvent system (TSS) which has zero ionic strength was converted to homogeneous monophasic polar hydrophilic phase via exposure to CO₂ at different pressure and time duration. Then hydrophobic enriched Cd- ammonium pyrrolidine thiocarbamate was back extracted, using HNO₃ (0.1 to 0.5 mol L⁻¹) then the second round of TSS-ME was applied. The acidic aqueous phase enrich with analyte was separated from tunable solvent. The separated TSS was easily reused for up to 10 time for preconcentration purposes without loss of its enrichment character. The smoker and nonsmoker psoriatic patients at PASI >10, have two to three folds higher Cd levels in serum samples than healthy persons.     

Role of the Polymer Matrix on the Photoluminescence of Embedded CdSe Quantum Dots

The photoluminescence (PL) of CdSe quantum dots (QDs) that form stable nanocomposites with polymer liquid crystals (LCs) as smectic C hydrogen‐bonded homopolymers from a family of poly[4‐(n‐acryloyloxyalkyloxy)benzoic acids] is reported. The matrix that results from the combination of these units with methoxyphenyl benzoate and cholesterol‐containing units has a cholesteric structure. The exciton PL band of QDs in the smectic matrix is redshifted with respect to QDs in solution, whereas a blueshift is observed with the cholesteric matrix. The PL lifetimes and quantum yield in cholesteric nanocomposites are higher than those in smectic ones. This is interpreted in terms of a higher order of the smectic matrix in comparison to the cholesteric one. CdSe QDs in the ordered smectic matrix demonstrate a splitting of the exciton PL band and an enhancement of the photoinduced differential transmission. These results reveal the effects of the structure of polymer LC matrices on the optical properties of embedded QDs, which offer new possibilities for photonic applications of QD–LC polymer nanocomposites.     

Laboratory Performance Evaluation on Analysis of Cadmium and Lead in Herb through Participation in the Regional Laboratory Comparison APMP QM-P10

The ubiquitous presence of heavy metals in the environment arising from various natural and anthropogenic activities have led to the accumulation intrusion of these substances into agricultural products including herbal plants. With the rapid growth of herbal medicine trade market, extensive surveillance monitoring and laboratory testing of heavy metals in herbal samples are carried out worldwide nowadays. Those surveillance activities are very much rely on the quality of the data produced by analytical laboratory. As analysis of heavy metals have been one of several main interests of our laboratory of Research Center for Chemistry, then participation on the international laboratory comparison such as APMP.QM-P10: Cadmium and Lead in Herb is a valuable effort for evaluate laboratory performance in this area of analysis. Several trial run and validation had been performed on the proficiency samples, including sample preparation, level of method blanks, use of matrix modifiers, precision and also trueness check using suitable reference material. Z-scores of 0.787 and 1.105 for cadmium and lead respectively have obtained as result of participation. It was found that the z-scores were satisfactory compared to the satisfactory limit of -2 ≥ z-score ≤ 2. These results provide strong confirmation of maintained capability of Research Center for Chemistry on heavy metals analysis, particulary in herb.     

A three‐dimensional cadmium(II) coordination polymer with unequal homochiral double‐stranded concentric helical chains

A homochiral helical three‐dimensional coordination polymer, poly[[(μ₂‐acetato‐κ³O,O′:O)(hydroxido‐κO)(μ₄‐5‐nicotinamido‐1H‐1,2,3,4‐tetrazol‐1‐ido‐κ⁵N¹,O:N²:N⁴:N⁵)(μ₃‐5‐nicotinamido‐1H‐1,2,3,4‐tetrazol‐1‐ido‐κ⁴N¹,O:N²:N⁴:N⁵)dicadmium(II)] 0.75‐hydrate], {[Cd₂(C₇H₅N₆O)₂(CH₃COO)(OH)]·0.75H₂O}_n, was synthesized by the reaction of cadmium acetate, N‐(1H‐tetrazol‐5‐yl)isonicotinamide (H‐NTIA), ethanol and H₂O under hydrothermal conditions. The asymmetric unit contains two crystallographically independent Cd^II cations, two deprotonated 5‐nicotinamido‐1H‐1,2,3,4‐tetrazol‐1‐ide (NTIA⁻) ligands, one acetate anion, one hydroxide anion and three independent partially occupied water sites. The two Cd^II cations, with six‐coordinated octahedral and seven‐coordinated pentagonal bipyramidal geometries are located on general sites. The tetrazole group of one symmetry‐independent NTIA⁻ ligand links one of the independent Cd^II cations into 6₁ helical chains, while the other NTIA⁻ ligand links the other independent Cd^II cations into similar but unequal 6₁ helical chains. These chains, with a pitch of 24.937 (5) Å, intertwine into a double‐stranded helix. Each of the double‐stranded 6₁ helices is further connected to six adjacent helical chains through an acetate μ₂‐O atom and the tetrazole group of the NTIA⁻ ligand into a three‐dimensional framework. The helical channel is occupied by the isonicotinamide groups of NTIA⁻ ligands and two helices are connected to each other through the pyridine N and carbonyl O atoms of isonicotinamide groups. In addition, N—H...O and O—H...N hydrogen bonds exist in the complex.     

A three‐dimensional anionic metal–dicyanamide network in poly[ethyltriphenylphosphonium [tri‐μ2‐dicyanamidato‐cadmium(II)]]

The title compound, (C₂₀H₂₀P)[Cd(C₂N₃)₃], consists of ethyltriphenylphosphonium (EtPh₃P⁺) cations filling voids in a three‐dimensional anionic cadmium dicyanamide network. In the structure, each Cd^II atom is connected to six neighbouring Cd^II atoms through six separate dicyanamide ligands, forming cube‐shaped cages. The three‐dimensional anionic network encloses a solvent‐accessible void space of 1851 ų, amounting to 69.3% of the unit‐cell volume. Each cage accommodates only one EtPh₃P⁺ cation.     

Unusual 4‐arsonoanilinium cationic species in the hydrochloride salt of (4‐aminophenyl)arsonic acid and formed in the reaction of the acid with copper(II) sulfate,copper(II) chloride and cadmium chloride

Structures having the unusual protonated 4‐arsonoanilinium species, namely in the hydrochloride salt, C₆H₉AsNO₃⁺·Cl⁻, (I), and the complex salts formed from the reaction of (4‐aminophenyl)arsonic acid (p‐arsanilic acid) with copper(II) sulfate, i.e. hexaaquacopper(II) bis(4‐arsonoanilinium) disulfate dihydrate, (C₆H₉AsNO₃)₂[Cu(H₂O)₆](SO₄)₂·2H₂O, (II), with copper(II) chloride, i.e. poly[bis(4‐arsonoanilinium) [tetra‐μ‐chlorido‐cuprate(II)]], {(C₆H₉AsNO₃)₂[CuCl₄]}_n , (III), and with cadmium chloride, i.e. poly[bis(4‐arsonoanilinium) [tetra‐μ‐chlorido‐cadmate(II)]], {(C₆H₉AsNO₃)₂[CdCl₄]}_n , (IV), have been determined. In (II), the two 4‐arsonoanilinium cations are accompanied by [Cu(H₂O)₆]²⁺ cations with sulfate anions. In the isotypic complex salts (III) and (IV), they act as counter‐cations to the {[CuCl₄]²⁻}_n or {[CdCl₄]²⁻}_n anionic polymer sheets, respectively. In (II), the [Cu(H₂O)₆]²⁺ ion sits on a crystallographic centre of symmetry and displays a slightly distorted octahedral coordination geometry. The asymmetric unit for (II) contains, in addition to half the [Cu(H₂O)₆]²⁺ ion, one 4‐arsonoanilinium cation, a sulfate dianion and a solvent water molecule. Extensive O—H…O and N—H…O hydrogen bonds link all the species, giving an overall three‐dimensional structure. In (III), four of the chloride ligands are related by inversion [Cu—Cl = 2.2826 (8) and 2.2990 (9) Å], with the other two sites of the tetragonally distorted octahedral CuCl₆ unit occupied by symmetry‐generated Cl‐atom donors [Cu—Cl = 2.9833 (9) Å], forming a two‐dimensional coordination polymer network substructure lying parallel to (001). In the crystal, the polymer layers are linked across [001] by a number of bridging hydrogen bonds involving N—H…Cl interactions from head‐to‐head‐linked As—O—H…O 4‐arsonoanilinium cations. A three‐dimensional network structure is formed. Cd^II compound (IV) is isotypic with Cu^II complex (III), but with the central CdCl₆ complex repeat unit having a more regular M —Cl bond‐length range [2.5232 (12)–2.6931 (10) Å] compared to that in (III). This series of compounds represents the first reported crystal structures having the protonated 4‐arsonoanilinium species.     

A new two‐dimensional polymeric cadmium(II) complex containing dicyanamide bridging ligands

As part of an exploration of new coordination polymers, a cadmium‐dicyanamide complex, namely poly[benzyltriethylammonium [tri‐μ‐dicyanamido‐κ⁶N ¹:N⁵‐cadmium(II)]], {(C₁₃H₂₂N)[Cd(C₂N₃)₃]}_n , has been synthesized by the reaction of benzyltriethylammonium bromide, cadmium nitrate tetrahydrate and sodium dicyanamide in aqueous solution, and characterized by single‐crystal X‐ray diffraction at room temperature. In the crystal structure, each Cd^II cation is coordinated by six nitrile N atoms from six anionic dicyanamide (dca) ligands to furnish a slightly distorted octahedral geometry. Neighbouring Cd^II cations are linked by dicyanamide bridges to construct a two‐dimensional anionic layer coordination polymer. One amide N atom in the bridging dca ligand is disordered over two sites. The cations lie between the anionic frameworks and there are no hydrogen‐bond interactions between the cations and anions. The organic cations are not involved in the formation of the supramolecular network.