Alkyl Derivatives of Boehmite Having the Second Stage Structure

Abstract

The reaction of aluminum alkoxide in straight-chain primary alcohols at elevated temperatures yielded the alkyl derivatives of boehmite [AlO(OH)_1-x (OR) _x ], a class of intercalation compound where the guest moieties are covalently bonded to the host boehmite layers. The addition of small amounts of water to the reaction system yielded another phase having a larger basal spacing. XRD, IR, and elemental analysis showed that the products had the boehmite layer structure with the alkyl moieties incorporated between the boehmite layers. IR spectra of the products also exhibited bands due to hydrogen bonding between the boehmite layers. These results suggest that the products are the alkyl derivatives of boehmite having the second stage structure. Because water in the reaction medium facilitated the hydrolysis of intermediate aluminum alkoxides, the product with the second stage structure had smaller alkyl/Al ratio and therefore had smaller basal spacing than that expected from the corresponding first stage product.     

First report of the direct supporting of palladium–arginine complex on boehmite nanoparticles and application in the synthesis of 5‐substituted tetrazoles

Boehmite nanoparticles are aluminium oxide hydroxide (γ‐AlOOH) particles, which were prepared using a simple and inexpensive procedure in water at room temperature and further modified using arginine. Subsequently palladium particles were immobilized on their surface to prepare Pd‐Arg@boehmite. This novel nanostructured compound was fully characterized using thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma optical emission (ICP‐OES) and energy‐dispersive X‐ray spectroscopies, and scanning and transmission electron microscopies. Finally, this catalyst was applied as a moisture‐ and air‐stable heterogeneous material for the synthesis of 5‐substituted 1H –tetrazole derivatives. The leaching of palladium and heterogeneity of the catalyst were studied using hot filtration and ICP‐OES. This catalyst demonstrated remarkable recyclability. The novelty of this work is that it represents the first time an amino acid has been grafted on boehmite nanoparticles.     

Boehmite nanorod‐reinforced‐polyethylenes and ethylene/1‐octene thermoplastic elastomer nanocomposites prepared by in situ olefin polymerization and melt compounding

Nanocomposites of polyethylene (HDPE) and poly(ethylene‐co‐1‐octene) thermoplastic elastomers, both containing boehmites with variable sizes, shapes, and aspect ratios (1–20), were prepared by means of in situ olefin polymerization and melt compounding. The in situ olefin polymerization in the presence of boehmite nanorods afforded nanocomposites containing 4–8 wt % of boehmite. In an alternative process, the in situ olefin polymerization was used to produce polyolefins with high boehmite content of 50 wt % as masterbatches for polyolefin melt compounding with ethylene homo‐ and copolymers. The addition of the boehmite nanofillers improved the stiffness without sacrificing high elongation at break. The stiffness, as expressed by Young's modulus, increased with increasing boehmite aspect ratio. In case of thermoplastic elastomer nanocomposites the increase of stiffness was accompanied by a simultaneous increase of elongation at break. According to transmission electron microscopy (TEM), fine dispersion of the polar boehmite nanorods and nanoplatelets within the nonpolar hydrocarbon polymer matrix was obtained without requiring the addition of special dispersing agents or functionalized polyolefin compatibilizers. The comparison of melt compounding of polyethylene with boehmites or polyethylene/boehmite masterbatches revealed that compounding of masterbatches prepared by in situ polymerization filling afforded much finer and more uniform nanoboehmite dispersions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2755–2765, 2008     

Infrared spectral study of molecular vibrations in amorphous, nanocrystalline and AlO(OH) · αH2O bulk crystals

Amorphous, nanocrystalline, and bulk AlO(OH) · xH₂O crystals have six fundamental modes (FM) of vibration in a nonlinear AlO(OH) molecular structure. Most of them appear in groups of four IR and Raman bands. Their positions and relative intensities differ significantly in three specimens. The nanocrystals (monoclinic structure with z=8 molecules per unit cell) have four OH stretching bands at values enhanced by up to 360 cm⁻¹ at 3120, 3450, 3560 cm⁻¹ in comparison to those in bulk crystals or amorphous specimens. The first two bands are broad, bandwidth Δν_1/2200 to 350 cm⁻¹, while the other two are sharp, Δν_1/290 cm⁻¹. The sharp bands shift to 3525 and 3595 cm⁻¹ after heating the sample at 100°C. They no longer appear after heating at 300 or 500°C for 2 h (the specimen decomposes to Al₂O₃), leaving behind only two bands at 3100 and 3400 cm⁻¹. A Δν_1/2 value of 500 cm⁻¹ appears in the 3400 cm⁻¹ in a delocalized distribution of H atoms. Two bands also occur at 3098 and 3300 cm⁻¹ in bulk crystals (orthorhombic structure with z=4) or at 2990 and 3515 cm⁻¹ in an amorphous sample. More than one bands appear in a FM vibration in occurrence of sample in more than one conformers. The amorphous sample has approximately the same conformer structure as the bulk crystals. An amorphous surface structure exists in nanocrystals with a group of three bands at 1420, 1510 and 1635 cm⁻¹ in an interconnected network structure. It encapsulates the nanocrystals in an amorphous shell. Its volume fraction, 33% estimated from the integrated intensity in three bands, determines 2.2 nm thickness in the shell in spherical shape of nanocrystals in 35 nm diameter.     

Effect of Solution Chemistry on Preparation of Boehmite by Hydrothermal Assisted Sol-Gel Processing of Aluminum Alkoxides

Various aluminum alkoxide precursors have been used for the preparation of boehmite by hydrothermal assisted sol-gel processing. The coordination status of aluminum in solution for all precursors employed for the preparation of boehmite phase was determined by ²⁷Al NMR and correlation between coordination status of aluminum atoms of precursors and development of boehmite phase has been investigated. Hydrothermal assisted hydrolysis of aluminum alkoxides where the aluminum atoms are four or five coordinated in solution resulted in the formation of boehmite. In contrast, hydrothermal hydrolysis of aluminum alkoxides where the aluminum atoms are six coordinated resulted in the formation of amorphous gel. Development of boehmite phase by hydrothermal hydrolysis of aluminum alkoxides at various temperatures was pursued by X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy.     

高分散纳米薄水铝石和纳米氧化铝的制备及其对甲基橙的吸附性能

以硝酸铝为铝源,尿素为沉淀剂,采用无模板水热法合成纳米薄水铝石(γ-AlO(OH))。在不同温度下煅烧后,得到氧化铝产物(γ-Al2O_3和θ-Al2O_3)。利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、氮气吸附-脱附法和紫外-可见分光光度计(UV-Vis)对产物进行了表征分析。并且研究了产物对甲基橙(MO)的吸附性能,系统地考察了吸附时间、溶液的pH值、甲基橙浓度及循环使用对产物吸附性能的影响。此外,还对吸附过程进行了相关吸附理论研究。结果表明:与其他方法所制备的产物相比,通过该方法获得的产物的分散性更高,形态更均匀和完整。产物为高度分散的纳米捆扎状结构。γ-AlO(OH)对甲基橙的最大吸附量达1 492.5 mg·g~(-1)。另外,产物的吸附机制包含化学作用吸附机制和静电作用吸附机制等。3种产物对甲基橙的吸附均符合Langmuir单分子层吸附模型,吸附过程均符合二级动力学特征。     

Zirconium oxide complex anchored on boehmite nanoparticles as highly reusable organometallic catalyst for C–S and C–O coupling reactions

Boehmite nanoparticles were prepared by a simple and inexpensive procedure in water using commercially available materials without inert atmosphere. Then, the surface of the boehmite nanoparticles was modified using 3‐mercaptopropyltrimethoxysilane and subsequently zirconium oxide was supported on the modified surface. Zirconium oxide supported on boehmite nanoparticles (Pr.S‐ZrO@boehmite) was characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and inductively coupled plasma technique. The catalytic application of Pr.S‐ZrO@boehmite was studied in C–O and C–S coupling reactions for synthesis of valuable compounds such as ether and sulfide derivatives. All products were obtained in good to excellent yields and the catalyst could be recovered and reused several times without significant loss of catalytic efficiency. Furthermore, zirconium oxide is rarely used as catalyst for cross‐coupling reactions.     

A new Pd‐Schiff‐base complex on boehmite nanoparticles: Its application in Suzuki reaction and synthesis of tetrazoles

Boehmite nanoparticles are not air or moisture sensitive, therefore have been prepared in water without inert atmosphere using inexpensive materials. Pd‐isatin‐boehmite was synthesized and used as heterogeneous organometallic catalyst for the synthesis of 5‐substituted 1H‐tetrazoles and C‐C band formation. Pd‐isatin‐boehmite characterized by XRD, TGA, SEM and ICP‐OES techniques. This catalyst was reused for several times without significant loss of its catalytic efficiency or palladium leaching. Heterogeneity of this catalyst has been studied using ICP‐OES technique.     

In Situ High‐Energy Synchrotron Radiation Study of Boehmite Formation,Growth, and Phase Transformation to Alumina in Sub‐ and Supercritical Water

Boehmite (AlOOH) nanoparticles have been synthesized in subcritical (300 bar, 350 °C) and supercritical (300 bar, 400 °C) water. The formation and growth of AlOOH nanoparticles were studied in situ by small‐ and wide‐angle X‐ray scattering (SAXS and WAXS) using 80 keV synchrotron radiation. The SAXS/WAXS data were measured simultaneously with a time resolution greater than 10 s and revealed the initial nucleation of amorphous particles takes place within 10 s with subsequent crystallization after 30 s. No diffraction signals were observed from Al(OH)₃ within the time resolution of the experiment, which shows that the dehydration step of the reaction is fast and the hydrolysis step rate‐determining. The sizes of the crystalline particles were determined as a function of time. The overall size evolution patterns are similar in sub‐ and supercritical water, but the growth is faster and the final particle size larger under supercritical conditions. After approximately 5 min, the rate of particle growth decreases in both sub‐ and supercritical water. Heating of the boehmite nanoparticle suspension allowed an in situ X‐ray investigation of the phase transformation of boehmite to aluminium oxide. Under the wet conditions used in this work, the transition starts at 530 °C and gives a two‐phase product of hydrated and non‐hydrated aluminium oxide.     

Schiff base‐functionalized boehmite nanoparticle‐supported molybdenum and vanadium complexes: efficient catalysts for the epoxidation of alkenes

Boehmite nanoparticles, with high surface area and high degree of surface hydroxyl groups, were prepared via hydrothermal‐assisted sol–gel processing of aluminium 2‐butoxide. The produced powder was covalently functionalized with 3‐(trimethoxysilyl)propylamine, and then, in order to support vanadium oxosulfate and molybdenum hexacarbonyl complexes, all the terminal amine groups were changed to Schiff bases by refluxing with salicylaldehyde. These catalysts were applied in the epoxidation of cis‐cyclooctene and other olefins with tert‐BuOOH in CCl₄. The catalytic procedures for both catalysts were optimized for various parameters such as solvent and oxidant. Recycling experiments revealed that these heterogeneous nano‐catalysts could be repeatedly applied for the epoxidation of alkenes. Copyright © 2015 John Wiley & Sons, Ltd.