金刚石衬底上GaN HEMT沟道温度建模:各向异性且非均匀热导率的影响

为了改善GaN HEMT的自热效应,集成高热导率的金刚石衬底有助于增强器件有源区的热量耗散。然而,化学气相淀积(CVD)生长的多晶金刚石(PCD)具有柱状晶粒结构,导致了各向异性的材料热导率,且其热导率值与生长厚度有关。为此,通过建模金刚石生长过程中晶粒尺寸的演变过程,计算了金刚石沿面内和截面方向的热导率。基于该PCD热导率模型,利用计入材料非线性热导率的GaN器件热阻解析模型,计算得到了GaN HEMT沟道温度的波动范围,并分析了其与器件结构(栅长、栅宽、栅间距、衬底厚度)和功耗的依赖关系。最后,通过与有限元(FEM)仿真结果对比,分区域提取了GaN HEMT器件中PCD衬底的有效热导率,分别为260~310 W/(m·K)和1 250~1 450 W/(m·K)。本文的计算为预测金刚石衬底上GaN HEMT器件的沟道温度提供了快速、有效的方法。     

现代分析仪器在高中化学教学中的应用*——以“防晒霜的防晒效果实验探究”为例

从高中化学原子、分子等抽象性的知识教学出发,以防晒霜的防晒效果实验探究为例,探讨了现代分析仪器在高中化学教学中的应用。通过利用现代分析仪器紫外可见分光光度计,结合紫外线变色球实验探究防晒霜的防晒效果,分析并认识防晒霜中化学防晒的机理。结果表明,防晒霜的厚度越大、SPF越高,防晒霜的防晒效果越好,并且防晒霜的防晒效果可以持续一段时间,但是不同类型的防晒产品存在一定差异。在化学教学中渗透现代分析仪器的应用,为学生进一步了解化学学科在改变学习方式、拓宽学科知识领域、推动自身全面与可持续发展方面打下坚实的基础。     

Negative compressibility property in hinging open-cell Kelvin structure

A new three-dimensional(3 D) cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property. It is shown that this model has adjustable compressibility and does exhibit negative compressibility for some certain conformations. And further study shows that the images of compressibility are symmetrical about the certain lines, which indicates that the mechanical properties of the model in the three axial directions are interchangeable and the model itself has a certain geometric symmetry. A comparison of the Kelvin model with its anisotropic form with the dodecahedron model shows that the Kelvin model has stronger negative compressibility property in all three directions.Therefore, a new and potential method to improve negative compressibility property can be derived by selecting the system type with lower symmetry and increasing the number of geometric parameters.     

Microextraction of metal ions based on solidification of a floating drop: Basics and recent updates

This review provides a comprehensive evaluation of solidified floating organic drop microextraction (SFODME) procedures for metal ions preconcentration and their contributions to green chemistry. In this article we focused on the modifications that have been performed in the recent years to improve this environmentally friendly procedure. Among the most important of these modifications are the inclusion of ultrasonic energy, vortex and air agitation to enhance the dispersion process. The article also discussed new challenges in the procedure by using more ecofriendly solvents as extractants such as ionic liquids, deep eutectic. and supramolecular solvents. The coupling of SFODME with solid phase extraction increases selectivity and efficiency of the preconcentration procedure.     

An approach to characterization of the agricultural self-propelled machines stability

This paper presents an analytical algorithm with appropriate software specified for the approximation of the allowed critical slope of the solid flat terrain that guarantees static and/or dynamic stability of the specified self-propelled agricultural machines and their aggregates. This algorithm assumes machine as a rigid body, having 3 or 4 contact points (defined by wheels or crawlers), under uniform motion at different constant velocities and radii of curvature trajectories. Using this algorithm, based on the principles of theoretical mechanics combined with 3D analytical geometry, the computer program SSPM (stability of the self-propelled agricultural machines) has been coded. This software is intended to facilitate the analysis, comparison and optimization of different configurations of self-propelled agricultural machines in operation on horizontal and sloped flat terrains at constant velocities and radii of trajectory with respect to their static and dynamic stability. It calculates critical pitch and roll angles of the self-propelled machine and the maximum allowed slope of the flat terrain under the given conditions. The algorithm and the appropriate SSPM software were experimentally verified using the platform and low-scale tractor model. Average difference between calculated and experimental critical values of roll and pitch angles were about 4°     

XPS study of silicon spheres as a density standard

As density is one of the basic physical properties of materials, an accurate density standard is absolutely essential. To determine density with high accuracy and precision, two 1-kg single-crystal silicon spheres (NMIJ-S4 and NMIJ-S5) are used as the primary standard at the National Metrology Institute of Japan. For the accurate measurement of the mass and volume of the silicon spheres, the effects of the surface layer must be carefully considered. In this work, a surface layer model of NMIJ-S4 and NMIJ-S5 was proposed and the thicknesses of each surface layer were determined using X-ray photoelectron spectroscopy. A detailed uncertainty budget is presented to aid use of the density standard.     

Ultra-sensitive analysis based on electrochemistry,electrokinetic and magnetic preconcentration of analytes

Some of the challenges with detection of ultra-low concentrations of analytes are to achieve sufficient sensitivity of the measurement and to direct the analyte species to the sensor (electrode) surface. This review describes various strategies that are available to address these challenges: method of electrocatalytic amplification, electrochemical measurements performed in combination with electrokinetic preconcentration of analytes, ultra-sensitive analysis utilizing increased surface area and also the manipulation by the magnetic force.     

Tips and Tricks for the Surface Engineering of Well-Ordered Morphologically Driven Silver-Based Nanomaterials

Particularly-shaped silver nanostructures are successfully applied in many scientific fields, such as nanotechnology, catalysis, (nano)engineering, optoelectronics, and sensing. In recent years, the production of shape-controlled silver-based nanostructures and the knowledge around this topic has grown significantly. Hence, on the basis of the most recent results reported in the literature, a critical analysis around the driving forces behind the synthesis of such nanostructures are proposed herein, pointing out the important role of surface-regulating agents in driving crystalline growth by favoring (or opposing) development along specific directions. Additionally, growth mechanisms of the different morphologies considered here are discussed in depth, and critical points highlighted.     

对比实验法在无机及分析化学实验教学中的应用——以银量法测定氯含量实验为例

介绍莫尔法和荧光黄法测定生理盐水中氯化钠含量的实验原理和操作步骤，针对无机及分析化学实验教学中测定氯含量实验的原理、指示剂、标准溶液、滴定条件及适用范围等内容进行比较和分析，阐明了不同实验方法与操作步骤之间的对应关系。学生根据预习实验，结合具体实验操作、实验现象和实验结果的对比，可以充分直观地理解实验内容，掌握无机及分析化学实验的学习方法，提高学生的发现问题和解决问题的能力。     

政府监管下的医院医疗信息分享演化博弈分析

在分析政府监管下医院间医疗信息分享特征的基础上,结合我国当前正在推行的医联体医院间信息分享运作模式,引入梅特卡夫定律并考虑患者评价的影响,分析了监管部门与医院各自的利益组成,建立了监管部门与医院两者之间的演化博弈模型,并采用复制动态方程研究了不同情形下医院间信息分享的演化博弈轨迹。研究表明,政府通过监管并建立激励惩罚机制等引导措施对医院最终达到的演化稳定态具有极大影响;降低医院主体信息分享的风险成本、规范提高医院分享信息的质量、引导患者增强对医院信息分享的关注、制定有吸引力和威慑力的奖惩政策,是促进医院医疗信息分享的关键。研究结果可为政府监管部门预测医院间的信息分享趋势和制定精准化政策以促进分享提供参考。