分光光度法测定三氧化铀中的硫酸根

采用TBP-萃淋树脂吸附三氧化铀样品中的铀,硫酸根与铬酸钡进行交换反应后,直接比色法测定硫酸根的含量。实验中研究了三氧化铀样品中硫酸根含量测定的样品制备、分离、反应酸度,煮沸时间,铬酸钡用量等影响因素。优化条件下,采用硝酸(5mol/L)淋洗、1mL HCl溶液(2.5mol/L)调节溶液中酸浓度、使用2mL BaCrO_4进行交换反应、煮沸3min,得到方法相对标准偏差小于10%,加标回收率为92.9%～110%。实验结果表明,直接显色的测定方法灵敏、快速、准确度高。方法测定条件易于获得,适于推广应用。     

More QACs,more questions: Recent advances in structure activity relationships and hurdles in understanding resistance mechanisms

Quaternary ammonium compounds (QACs) are a class of antimicrobials that have been around for over a century; nevertheless, they have found continued renewal in the structures to which they can be appended. Ranging from antimicrobial polymers to adding novel modes of action to existing antibiotics, QACs have found ongoing use due to their potent properties. However, resistance against QACs has begun to emerge, and the mechanism of resistance is still only partially understood. In this review, we aim to summarize the current state of the field and what is known about the mechanisms of resistance so that the QACs of the future can be designed to be evermore efficacious and utilized to unearth the remaining mysteries that surround bacteria’s resistance to them.     

Biological activity of new amino phospha betaines with C10–C18 alkyl groups

New amino phospha betaines were obtained by quaternization of potassium salt of amino phosphonate and higher alkyl bromides. The structure of isopropyl (N-dodecyl-N,N- dimethylammoniomethyl)phosphonate was confirmed by single crystal X-ray diffraction. All synthesized compounds demonstrate high antibacterial and antifungal activities.     

Determination of vitamin A in blood serum based on solid‐phase extraction using cetyltrimethyl ammonium bromide‐modified attapulgite

Cetyltrimethyl ammonium bromide‐modified attapulgite was prepared and utilized as a novel sorbent in a simple solid‐phase extraction method for the determination of vitamin A in blood serum. Several factors affecting extraction efficiency were systematically optimized, including the sampling solvent and its volume, as well as the elution solvent and its volume. Under the optimal solid‐phase extraction conditions, the adsorption capacity of vitamin A was as high as 28 mg/g according to the Langmuir isotherm model. Based on the developed solid‐phase extraction method, the level of vitamin A in 200 µL blood serum sample could be accurately determined by high‐performance liquid chromatography. The recoveries of vitamin A spiked in 10% v/v methanol aqueous solutions were in the range of 86.9–92.8%, with the relative standard deviations not more than 8.1%. The method was applied to the determination of vitamin A in serum samples from 20 pregnant women. Compared with the previously reported solid‐phase extraction methods for determination of vitamin A in serum, our developed cetyltrimethyl ammonium bromide‐modified attapulgite‐based solid‐phase extraction method used lower serum volume, omitted extra steps (i.e. evaporation and re‐dissolution), and eliminated internal standard. The results were promising for it to be used in routine monitoring during pregnancy.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

Thermodynamic study of transthyretin association (wild‐type and senile forms) with heparan sulfate proteoglycan: pH effect and implication of the reactive histidine residue

The tetramer destabilization of transthyretin into monomers and its fibrillation are phenomena leading to amyloid deposition. Heparan sulfate proteoglycan (HSPG) has been found in all amyloid deposits. A chromatographic approach was developed to compare binding parameters between wild‐type transthyretin (wtTTR) and an amyloidogenic transthyretin (sTTR). Results showed a greater affinity of sTTR for HSPG at pH 7.4 compared with wtTTR owing to the monomeric form of sTTR. Analysis of the thermodynamic parameters showed that van der Waals interactions were involved at the complex interface for both transthyretin forms. For sTTR, results from the plot representing the number of protons exchanged vs pH showed that the binding mechanism was pH‐dependent with a critical value at a pH 6.5. This observation was due to the protonation of a histidine residue as an imidazolium cation, which was not accessible when TTR was in its tetrameric structure. At pH >6.5, dehydration at the binding interface and several contacts between nonpolar groups of sTTR and HSPG were also coupled to binding for an optimal hydrogen‐bond network. At pH <6.5, the protonation of the His residue from sTTR monomer when pH decreased broke the hydrogen‐bond network, leading to its destabilization and thus producing slight conformational changes in the sTTR monomer structure. Copyright © 2014 John Wiley & Sons, Ltd.     

Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

pH控制硫酸锰骨架的演化及其晶体结构

在DMF/H2O/CH3OH的混合体系中,反应温度为170℃,Mn SO4·4H2O盐溶液在p H=5和7的条件下,加热72小时,最终得到了结构不同的硫酸锰骨架[Mn2(SO4)3]·(H3O)2(1)和[Mn3(SO4)2(OH)2(H2O)2](2)。化合物结构通过单晶X-射线和红外光谱所表征,相应的晶胞参数:化合物1,立方晶系,空间群:P213,a=10.2009(12),V=1061.49(37)3,Goo F=1.158,Flack parameter 0.02(2),R1=0.0186(I2sigma);化合物2,四方晶系,空间群:Pbcm,a=7.3214(15),b=9.984(2),c=13.291(3),V=971.5(4)3,Goo F=1.063,R1=0.0227(I2sigma);单晶X射线分析显示化合物1是一个三维单手性硫酸锰骨架,化合物2是一个非手性羟基硫酸锰骨架。实验结果说明,p H值对硫酸锰骨架的改变起重要作用。     

Highly diastereoselective multicomponent synthesis of polysubstituted 2-hydroxy-2-trifluoromethylpiperidineswith four and five stereogenic centers

The Michael–Mannich cascade cyclization of cyano olefins, ethyl 4,4,4-trifluoro-3-oxobutanoate, aromatic aldehydes and ammonium acetate provides convenient stereoselective formation of ethyl 5,5-dicyano-4,6-diaryl-2-hydroxy-2-(trifluoromethyl)piperidine-3-carboxylates with fourstereogenic centers and dialkyl 4,6-diaryl-5-cyano-2-hydroxy-2-(trifluoromethyl)piperidine-3,5-dicarboxylates with five stereogenic centers. Ammonium acetate plays dual role, acting as a base and as a nitrogen source.     

超临界水中硫酸钠结晶动力学的分子动力学模拟

在超临界水反应器中，硫酸钠是易造成堵塞的一种常见无机盐，研究其结晶动力学对于防盐沉积反应器的设计具有重要意义.本文采用LAMMPS分子动力学模拟软件研究硫酸钠在超临界水中的微观结晶过程，其中水分子采用SPC/E模型，离子-离子、离子-水分子相互作用采用Coulumb和Lennard-Jones联合势能函数.结果表明：水对离子的静电屏蔽作用随温度升高而增强、随密度减小而减弱；增大超临界水的温度和密度有利于离子扩散，进而促进离子相互碰撞、成核；在模拟的超临界水参数范围内，其成核速率的数量级为10²⁹cm^-3·s^-1，生长速率为(19.8~25.8) m·s^-1.