双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

Electronic structures of CO adsorbed Pt-skin surface on Pt–Co and Pt–Ni alloys

By using angle resolved photoemission spectroscopy, we investigate the electronic structures of Pt-skin layer of Pt–Co and Pt–Ni alloys with CO molecules on the surface. Measured Fermi surface maps and band dispersions reflect the signatures of chemical bonding between Pt-skin layer and CO molecules. Furthermore, the degree of chemical bonding strength of CO molecules, estimated from the energy shift of the participating bands, is found to be reduced on both Pt bimetallic alloys. Our results show how the surface band structure of Pt bimetallic alloys is modified with molecular orbitals of CO molecules on the surface, revealing the important role of the electronic structure in the determination of chemical properties of bimetallic alloys.     

Characterization and gas adsorption of a novel three‐dimensional metal–organic framework (MOF) generated from a new polydentate fluorene‐bridged ligand

A polydentate ligand bridged by a fluorene group, namely 9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene (L), has been prepared under solvothermal conditions in acetonitrile. Crystals of the three‐dimensional metal–organic framework (MOF) poly[[[μ₃‐9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene‐κ³N:N′:O]bis(methanol‐κO)(μ‐sulfato‐κ²O:O′)nickel(II)] methanol disolvate], {[Ni(SO₄)(C₂₇H₂₄N₂O₂)(CH₃OH)]·2CH₃OH}_n, (I), were obtained by the solvothermal reaction of L and NiSO₄ in methanol. The ligand L forms a two‐dimensional network in the crystallographic bc plane via two groups of O—H…N hydrogen bonds and neighbouring two‐dimensional planes are completely parallel and stack to form a three‐dimensional structure. In (I), the Ni^II ions are linked by sulfate ions through Ni—O bonds to form inorganic chains and these Ni‐containing chains are linked into a three‐dimensional framework via Ni—O and Ni—N bonds involving the polydentate ligand L. With one of the hydroxy groups of L coordinating to the Ni^II atom, the torsion angle of the hydroxyethyl group changes from that of the uncoordinated molecule. In addition, the adsorption properties of (I) with carbon dioxide were investigated.     

无穷多目标优化的Geoffrion真有效性及其在鲁棒优化中的应用

在多目标优化中,Pareto有效性体现了目标之间的妥协与补偿,而Geoffrion真有效性能保证补偿是有界的.本文对有无穷多个目标的优化问题引入了真有效性,完整保留了Geoffrion的结构.基于一族锥,揭示了Geoffrion真有效性的特点及其与Pareto有效性的区别.并将Geoffrion真有效性的思想用于鲁棒优化,得到了著名的Hurwicz决策准则.     

Effects of particle size and concentration on bubble coalescence and froth formation in a slurry bubble column

A new approach for simulating the formation of a froth layer in a slurry bubble column is proposed. Froth is considered a separate phase, comprised of a mixture of gas, liquid, and solid. The simulation was carried out using commercial flow simulation software (FIRE v2014) for particle sizes of 60–150 μm at solid concentrations of 0–40 vol%, and superficial gas velocities of 0.02–0.034 m/s in a slurry bubble column with a hydraulic diameter of 0.2 m and height of 1.2 m. Modelling calculations were conducted using a Eulerian–Eulerian multiphase approach with k–ε turbulence. The population balance equations for bubble breakup, bubble coalescence rate, and the interfacial exchange of mass and momentum were included in the computational fluid dynamics code by writing subroutines in Fortran to track the number density of different bubble sizes. Flow structure, radial gas holdup, and Sauter mean bubble diameter distributions at different column heights were predicted in the pulp zone, while froth volume fraction and density were predicted in the froth zone. The model was validated using available experimental data, and the predicted and experimental results showed reasonable agreement. To demonstrate the effect of increasing solid concentration on the coalescence rate, a solid-effect multiplier in the coalescence efficiency equation was used. The solid-effect multiplier decreased with increasing slurry concentration, causing an increase in bubble coalescence efficiency. A slight decrease in the coalescence efficiency was also observed owing to increasing particle size, which led to a decrease in Sauter mean bubble diameter. The froth volume fraction increased with solid concentration. These results provide an improved understanding of the dynamics of slurry bubble reactors in the presence of hydrophilic particles.     

Dissipation of chlortetracycline in the aquatic environment: Characterization in terms of a generalized multiphase pseudo–zero-order rate law

The kinetics of the dissipation of chlortetracycline in the aquatic environment was studied over a period of 90 days using microcosm experiments and distilled water controls. The distilled water control experiments, carried out under dark conditions as well as exposed to natural sunlight, exhibited biphasic linear rates of dissipation. The microcosm experiments exhibited triphasic linear rates of degradation both in the water phase (2.7 × 10⁻², 7 × 10⁻³, 1.3 × 10⁻³ μg g⁻¹ day^–1) and the sediment phase (3.4 × 10⁻², 6 × 10⁻³, 1 × 10⁻³ μg g⁻¹ day^–1). The initial slow rate of dissipation in the dark control (3 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation and hydrolysis, whereas the subsequent fast rate (1.8 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and microbial degradation. For the sunlight-exposed control, the initial slow rate of dissipation (1.5 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and photolysis, whereas the subsequent fast rate was attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation (5.1 × 10⁻³ μg g⁻¹ day^–1). The initial fast rate of dissipation in the water phase of the microcosm experiment is attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation, whereas all subsequent slow rates in the water phase and all rates of degradation in the sediment phase are attributed to microbial degradation of the colloidal and sediment particle adsorbed antibiotic. A multiphase zero-order kinetic model is presented that takes into account (a) dissipation of the antibiotic via evaporation, hydrolysis, photolysis, microbial degradation, and adsorption by colloidal and sediment particles and (b) the dependence of the dissipation rate on the concentration of the antibiotic, type and count of microorganisms, and type and concentration of colloidal particles and sediment particle adsorption sites within a given aquatic environment.     

Molecular Design Tactics for Highly Efficient Thermally Activated Delayed Fluorescence Emitters for Organic Light Emitting Diodes

Recently, pure organic thermally activated delayed fluorescence (TADF) emitters have attracted considerable interest from the scientific community in the field of organic light emitting diodes (OLEDs) as they can theoretically realize 100 % of the internal quantum efficiency by exploiting both the singlet and triplet excitons via the reverse intersystem crossing enabled by small singlet‐triplet energy splitting. Currently, the external quantum efficiency of the TADF emitters is reaching the level of phosphorescent emitters. Therefore, the TADF approach is considered as a potential alternative to the low efficiency conventional fluorescent and expensive phosphorescent emitters. In this account, we summarized our recent development of blue and green TADF molecular designs to improve the device performances of the TADF devices.     

DFT Study of Methanol Adsorption on Defect-Free CeO2 Low-Index Surfaces

Methanol decomposition is a promising method for hydrogen production. However, the performance of current catalysts for this process is not sufficient for commercial applications. In this work, methanol adsorption on the CeO₂ low-index surfaces is studied by density functional theory (DFT). The results show that methanol always dissociates spontaneously on the (100) surface, whereas dissociation on the (110) surface is site-selective; dissociation does not occur at all on the (111) surface, where only weak physisorption is found. The results confirm that surfaces with higher energies are more catalytically active. Analysis of the surface geometries shows that the dominant factors for the dissociation of methanol are the degree of undercoordination and the charges of the surface ions. The adsorption energy of each methanol molecule decreases with increasing coverage and there is a transition threshold between dissociative and associative adsorption. The present work indicates that a strategy to design catalysts with high activity is to maximize exposure of surfaces on which the ions have a high degree of undercoordination and a strong tendency to donate/accept electrons. The results demonstrate the importance of appropriately selecting and controlling exposed facets and particle morphology for optimizing catalyst performance.     

Polyepoxysuccinic acid with hyper-branched structure as an environmentally friendly scale inhibitor and its scale inhibition mechanism

In order to improve the scale inhibition efficiency of existing polyepoxysuccinic acid (PESA) and to study the impact of their molecular structure on scale inhibition efficiency, a series of PESA with linear and hyper-branched structure have been designed and synthesized through co-polymerization reaction with glycidyl and epoxy succinate. The scale inhibition behavior of PESA with linear and hyper-branched structure against CaCO₃ and CaSO₄ scales was evaluated using static scale inhibition method, and their ability to retard deposition of CaCO₃ was also examined. The experimental results showed that, for CaCO₃ and CaSO₄, the PESA with hyper-branched structure provides a scale inhibiting efficiency as high as 95.9% and 94.3%, respectively, at an inhibitor concentration of 15?mg/L. In addition, the processes of crystal nucleation, growth and crystal morphology have been analyzed. The experimental results show that the PESA with hyper-branched structure not only prolongs the induction period of CaCO₃ crystal nucleation, but also reduces the number of crystal nuclei and changes the size and morphology of the CaCO₃ crystal. Moreover, the FTIR, SEM and XRD analyses showed that the PESA with hyper-branched structure can induce the irregularity of growing CaCO₃ crystal, destroy the formation of crystals and change the polymorphs of calcium scale crystal. This conclusion indicates that the prepared PESA with hyper-branched structure has great potential for applying in the treatment of industrial water.