树状大分子接枝型聚合物色谱分离材料研究进展

随着色谱固定相制备技术和材料科学领域的不断发展,目前已经有大量修饰方法和新型材料被用于固相萃取、高效液相色谱以及离子色谱聚合物固定相填料的功能化修饰。其中聚酰胺-胺(PAMAM)树状大分子由于其独特的结构和性质,在色谱分离材料结构完善和性能提升中也发挥了重要的作用。该文主要综述了PAMAM树状大分子在以聚合物为基质的色谱分离材料修饰中的应用,并对其今后的发展进行了展望。     

Efficient removal of MB dye using litchi leaves powder adsorbent: Isotherm and kinetic studies

Removal of Methylene Blue (MB) dye using Litchi Leaves Powder (LLP) material was carried out in batch mode. Effect of the mass of the adsorbent (0.1–2.5 g/L), pH of the solution (2−12), starting concentration of MB dye (50–150 mg/L), ionic strength using NaCl (0.1–0.5 M) as an electrolyte, contact time (0–60 min) on the adsorption of MB dye was studied. To calculate pH at which LLP material surface becomes neutral point of zero charge (pH_pzc) is also determined and found to be 6.48. Removal process best fit in the pseudo-second-order kinetic model as indicated by its higher R² value (0.999). Isotherm models (Freundlich and Langmuir) were fitted to the data obtained from the experiment to understand the adsorption behaviour. Result shows that experimental data were fitted to the both isotherm models (Freundlich and Langmuir) as indicated by higher R² value for both Freundlich (0.991) and Langmuir (0.994) model, and it was determined that LLP has a maximum adsorption capacity of 119.76 mg/g.     

Mechanistic insights into methylene blue removal via olive stone-activated carbon: A study on surface porosity and characterization

Global attention is increasingly focused on the adverse health and environmental impacts of textile dyes, marking the necessity for effective and sustainable dye remediation strategies in industrial wastewater. This study introduces a novel, eco-friendly activated carbon produced from olive stones (OLS), a readily available by-product of the olive oil industry. The OLS was chemically activated with H₃PO₄ and KOH, creating two materials: OLS-P and OLS-K, respectively. These were then utilized as cost-effective adsorbents for the removal of methylene blue (MB) dye. The activated materials were characterized via X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), iodine number, and pHpzc analysis, with the zero-point charge determined as approximately pH 1 for OLS-P and pH 8 for OLS-K. Batch adsorption experiments conducted at various temperatures revealed that adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model. Temperature was found to significantly impact adsorption performance, with OLS-K demonstrating a substantial increase in adsorption capacity (q_e) from 6.27 mg/g at 23˚C to 94.7 mg/g at 32 ˚C. Conversely, OLS-P displayed a decrease in q_e from 16.78 mg/g at 23 ˚C to 3.67 mg/g at 32 ˚C as temperature increased. The study highlights the potential of KOH-treated olive stones as a promising, cost-efficient adsorbent for methylene blue remediation from wastewater.     

Optimization of Direct Blue 71 sorption by organic rich-compost following multilevel multifactor experimental design

Removal of a troublesome textile dye, Direct Blue 71 (DB71) from water by a food waste compost was assessed in the current study. Since compost dye sorption is a multi-factor process influenced by mass, pH, concentration, temperature, contact time, and salinity, the cumulative influence of all parameters on DB71 removal was examined following an optimal multilevel multifactor experimental design. The process had to be presented using both linear and interaction terms, according to the variables analysis: Dye sorption = –0.050Mass + 0.122Conc–0.114pH + 0.132Time – 0.074Temp + 0.056Sal + 0.103Mass × Conc + 0.226 Mass × pH – 0.257Mass × Time – 0.112Mass × Temp – 0.041Mass × Sal + 0.008Conc × pH + 0.100Conc × Time + 0.089Conc × Temp + 0.167Conc × Sal – 0.245pH × Time – 0.231pH × Temp – 0.123pH × Sal + 0.358Tim × Temp + 0.355Tim × Sal – 0.045Temp × Sal (R² = 0.9241)Salinity and pH were positively correlated with concentration, and contact time with temperature and salinity, to get better dye uptake. The optimal conditions for dye removal were the following: solid:liquid ratio 1:375, pH 3.0, initial dye concentration 400 mg L^?1, contact time 240 min, salinity 0.6 M NaCl, temperature 50 °C. At the optimum combination of factors, equilibrium sorption isotherm and sorption kinetics were studied. Kinetic analysis indicated high sorption rate 4.0 mg g^?1 min^?1 while 28% of maximum capacity was reached within the first 10 min of interaction. Sorption isotherm has L2-shape which reflected surface saturation at high solute concentration with low competition with solvent molecules, with a maximum sorption capacity of 95.4 mg g^?1. In column experiments performed at bed depth 5.1–12.8 cm, flow rate 1.0–2.0 mL min^?1 and influent concentration 10–20 mg L^?1, sorption capacity was 19.6 mg g^?1, which represents 21% of the maximum capacity at equilibrium conditions. IR analysis of dye-loaded-compost confirmed the contribution of hydrophobic-hydrophobic forces in the sorption process.     

Residue valorization: Preparation of recyclable organic amine adsorbent using laterite residue

This study focuses on exploiting the main component of traditional nickel metallurgical waste for use as a valuable material that can be applied in the removal of organic amines from water systems. Silicon compounds from metallurgic waste were converted into dissolvable sodium silicate by roasting the waste with alkali. Silica with adsorption capacity was combined with magnetic NiFe cores by the carbonation decomposition of purified silicate solution. The composite magnetic adsorbent was characterized, and its adsorption mechanism for organic amines was investigated. The effects of the initial trimethylamine concentration, contact time and temperature on the adsorption efficiency of the composite adsorbent towards trimethylamine were investigated. It was found that the adsorption fit the Freundlich mode well. The adsorption kinetics can be described by a pseudo-second-order kinetic model. The adsorption capacity reached 55.8 μg/mg at 293 K. The use of metallurgical waste to prepare the magnetic composite adsorbent has three advantages, which include benefiting the environment by reducing the amount of solid waste and costs associated with constructing and maintaining storage facilities, generating valuable products in an economical manner and conveniently recycling used adsorbents to avoid secondary pollution.     

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction combined with ultraviolet‐visible spectrophotometry for the determination of rhodamine 6G and crystal violet in textile wastewater

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction method combined with ultraviolet‐visible spectrophotometry was developed for the determination of selected cationic dyes in textile wastewater. Polypyrrole‐magnetite was used as adsorbent due to its thermal stability, magnetic properties, and ability to adsorb Rhodamine 6G and crystal violet. Dispersive micro‐solid‐phase extraction parameters were optimized, including sample pH, adsorbent amount, extraction time, and desorption solvent. The optimum polypyrrole‐magnetite dispersive micro‐solid phase‐extraction conditions were sample pH 8, 60 mg polypyrrole‐magnetite adsorbent, 5 min of extraction time, and acetonitrile as the desorption solvent. Under the optimized conditions, the polypyrrole‐magnetite dispersive micro‐solid‐phase extraction with ultraviolet‐visible method showed good linearity in the range of 0.05–7 mg/L (R ² > 0.9980). The method also showed a good limit of detection for the dyes (0.05 mg/L) and good analyte recoveries (97.4–111.3%) with relative standard deviations < 10%. The method was successfully applied to the analysis of dyes in textile wastewater samples where the concentration found was 1.03 mg (RSD ±7.9%) and 1.13 mg/L (RSD ± 4.6%) for Rhodamine 6G and crystal violet, respectively. It can be concluded that this method can be adopted for the rapid extraction and determination of dyes at trace concentration levels.     

Microbial Application to Improve Olive Mill Wastewater Phenolic Extracts

Olive mill wastewater (OMW) contains valuable and interesting bioactive compounds, among which is hydroxytyrosol, which is characterized by a remarkable antioxidant activity. Due to the health claims related to olive polyphenols, the aim of this study was to obtain an extract from OMW with an increased level of hydroxytyrosol by means of microbial enzymatic activity. For this purpose, four commercial adsorbent resins were selected and tested. The beta-glucosidase and esterase activity of strains of Wickerhamomyces anomalus, Lactiplantibacillus plantarum, and Saccharomyces cerevisiae were also investigated and compared to those of a commercial enzyme and an Aspergillus niger strain. The W. anomalus strain showed the best enzymatic performances. The SP207 resin showed the best efficiency in selective recovery of hydroxytyrosol, tyrosol, oleuropein, and total phenols. The bioconversion test of the OMW extract was assessed by using both culture broths and pellets of the tested strains. The results demonstrated that the pellets of W. anomalus and L. plantarum were the most effective in hydroxytyrosol increasing in phenolic extract. The interesting results suggest the possibility to study new formulations of OMW phenolic extracts with multifunctional microorganisms.     

Response surface methodology for optimization of heavy metal removal by magnetic biosorbent made from anaerobic sludge

In this study, optimum conditions for adsorption of heavy metals such as Cu²⁺, Cd²⁺ and Pb²⁺ onto a low-cost, magnetically modified-alkali conditioned anaerobically digested sludge (MADS) adsorbent were obtained. Response Surface Methodology (RSM) incorporating Central Composite Design (CCD) of experiments was applied to optimize four independent process variables. Statistical analysis was executed by ANOVA and the quadratic model developed had regression coefficients of 0.959, 0.957 and 0.95 for Cu²⁺, Cd²⁺ and Pb²⁺, respectively. The independent variables such as pH, time and initial concentration positively influenced adsorption capacity, q_e, whereas the value of q_e decreased with an increase in MADS dosage. Model validation experiments for optimization of adsorption process showed comparable results with predicted values. The adsorption capacity of MADS adsorbent at optimum conditions found through RSM analysis was 29.721 mg L^?1, 28.551 mg L^?1 and 28.601 mg L^?1 for Cu²⁺, Cd²⁺ and Pb²⁺ respectively.     

磁性三维氮掺杂碳纳米材料对6种双酚类化合物的吸附性能及其在泡腾分散微萃取中的应用

采用简单高温煅烧法成功制备了磁性钴镍基氮掺杂三维碳纳米管与石墨烯复合材料(CoNi@NGC),将其作为吸附剂用于水体中6种双酚类化合物(BPs)的吸附性能和机理研究。将CoNi@NGC复合纳米材料用作萃取介质,运用酸碱泡腾片的CO₂强力分散作用,开发了泡腾反应强化的分散固相微萃取前处理方法,结合高效液相色谱-荧光检测(HPLC-FLD)快速定量饮料中痕量BPs。采用扫描电镜、透射电镜、傅里叶红外光谱、氮气吸脱附、X射线光电子能谱和磁滞回线等技术手段对材料形貌结构进行表征,结果显示:该吸附剂成功实现氮元素的掺杂,且具有较大的比表面积(109.42 m²/g)、丰富的孔径及较强的磁性(17.98 emu/g)。吸附剂投加量、pH、温度、时间等因子优化试验表明:当pH=7,在初始质量浓度为5 mg/L的BPs混合溶液中投加5 mg CoNi@NGC, 298 K反应5 min,对双酚M(BPM)、双酚A(BPA)的吸附率分别高达99.01%和98.21%。作用90 min时对双酚Z(BPZ)、BPA、BPM的吸附率近100%。在吸附过程中,BPs与CoNi@NGC之间的整个吸附过程主要受氢键、静电作用和π-π共轭作用共同控制。整个吸附过程符合Freundlich吸附等温线模型和准二级动力学方程,吸附自发进行。进一步将CoNi@NGC作为萃取介质制备成磁性泡腾片,利用泡腾分散微萃取技术高效富集和提取6种盒装饮料中的BPs,优化了影响富集效果的泡腾片的存在与否、洗脱剂种类、洗脱时间、洗脱体积等关键因子,在最佳萃取条件下(pH=7,投加5 mg CoNi@NGC, 2 mL丙酮洗脱6 min),结合HPLC-FLD,新开发的泡腾分散微萃取方法提供的检出限为0.06~0.20 μg/L,定量限为0.20~0.66 μg/L,日内和日间精密度分别为1.44%~4.76%和1.69%~5.36%,在实际样品中不同水平下的加标回收率为82.4%~103.7%,在桃汁中检测到BPA和双酚B(BPB)分别为2.09 μg/L和1.37 μg/L。再生试验表明该吸附材料至少可以重复使用5次以上,显著降低了分析的试验成本。与其他方法相比,该方法具有灵敏度高、萃取速度快、环境友好等优点,在常规食品污染监测中具有较强的应用价值。     

Highly efficient removal of toxic lead ions from aqueous solutions using a new magnetic metal‐organic framework nanocomposite

A magnetic metal‐organic framework (MOF) nanocomposite was successfully prepared by a new and green strategy through reasonable design. Magnetic MOF of Fe₃O₄‐NHSO₃H@HKUST‐1 nanocomposite use for removal of lead ions as an environmental pollutant. The experimental results indicated that the nano adsorbent of Fe₃O₄‐NHSO₃H@HKUST‐1 can removed lead ions under optimum operational conditions. The dosage of the nanocomposite, pH of the sample solution, and contact time were obtained to be 10 mg, 7.0, and 90 min, respectively, while the initial concentration of Pb(II) ions of 400 mg/L was used. A kinetic study indicated that a pseudo‐second‐order model agreed well with the experimental data. The isotherm experiments revealed that the Langmuir model attained better fits to the equilibrium data than the Freundlich model. The maximum adsorption capacity of the adsorbent for the removal of lead under the optimum operational conditions of pH 7.0 and temperature 25°C was found to be 384.6 mg/g. The thermodynamic parameters indicate that the adsorption of lead is spontaneous and endothermic. The magnetic MOF nanocomposite could be recovered easily and reused many times without significant loss of its nano‐adsorbent activity. The proposed method is simple, eco‐friendly, low cost, and efficient in the removal of lead ions from aqueous solutions.