New organoruthenium metallates containing ferrocenecarboxalidine thiosemicarbazones and their nucleic acid/albumin binding and in vitro cytotoxicity

A string of four new hetero binuclear Ru(III) complexes of ferrocenecarboxaldehyde-4(N)-substituted thiosemicarbazones were synthesized and characterized by various spectral (infrared, ultraviolet–visible, Electron Paramagnetic Resonance (EPR) and High Resolution Mass Spectrometry (HR-MS) techniques. The binding abilities of the ligands/complexes with nucleic acid (calf thymus DNA, CT-DNA) and bovine serum albumin (BSA) were analyzed by absorption and emission titration methods. The complexes exhibited better DNA binding affinity than their parent ligands. The interaction with CT-DNA was found to be intercalative and with BSA static quenching mechanism was observed. All the synthesized Ru(III) complexes were subjected to study their in vitro cytotoxicity against MCF-7 (human breast cancer) and HT-29 (human colon cancer) cell lines. Among the four complexes, complex 3 [RuCp (FF-etsc)PPh₃]Cl exhibited the highest cytotoxicity in MCF-7 cells and complex 4 [RuCp (FF-ptsc)PPh₃]Cl was the most active on HT-29 cells.     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

Molecular Design Strategy for Orange Red Thermally Activated Delayed Fluorescence Emitters in Organic Light-Emitting Diodes (OLEDs)

Pure organic molecules based thermally activated delayed fluorescence (TADF) emitters have been successfully developed in recent years for their propitious application in highly efficient organic light emitting diodes (OLEDs). In the case of orange red emitters, the non-radiative process is known to be a serious issue due to its lower lying singlet energy level. However, recent studies indicate that there are tremendous efforts put to develop efficient orange red TADF emitters. In addition, the external quantum efficiency (EQE) of heteroaromatic based orange red TADF OLEDs surpassed 30 %. Such heteroaromatic type emitters showed wide emission spectra; therefore, more attention is being paid to develop highly efficient orange red TADF emitters along with good color purity. Herein, the recent progress of orange red TADF emitters based on molecular structures, such as cyanobenzene, heteroaromatic, naphthalimide, and boron-based acceptors, are reviewed. Further, our insight on these acceptors has been provided by their photophysical studies and device performances. Future perspectives of orange red TADF emitters for real practical applications are discussed.     

Ultrasonic assisted synthesis of nanocrystalline cellulose as support and reducing agent for Ag nanoparticles: green synthesis and novel effective nanocatalyst for degradation of organic dyes

In this study, nanocrystalline cellulose (NCC) prepared from microcrystalline cellulose using high‐intensity ultrasonication as mechanical method without any chemical treatment. The obtained NCC with around 30–50 nm diameters, utilized as support, reducing and stabilizing agent for in‐situ green and eco‐friendly synthesis of silver nanoparticles (Ag NPs). The catalytic activity of composite was examined for degradation of environmental pollutants. The structure of as‐synthesized composite (Ag@NCC) was characterized by ultraviolet–visible spectroscopy (UV–vis), field emission scanning electron microscopy (FE‐SEM); Transmission electron microscopy (TEM); Energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The results of the catalytic reaction experiments showed that spherically shaped silver nanoparticles of around 20 nm distributed on the surface of nanocellulose demonstrated high catalytic efficiency towards the removal of methyl orange (MO) and 4‐nitrophenol (4‐NP).     

Adsorption of methyl orange on nanoparticles of a synthetic zeolite NaA/CuO

CuO supported on an NaA zeolite (CuO/NaA) was prepared with an NaA zeolite through the ion-exchange (CuO/NaA) method. The morphology and the physicochemical properties of the prepared samples were investigated by XRD, MEB, and EDS. The various parameters, such as contact time, catalyst dose, initial dye concentration, initial pH, and temperature, influencing the adsorption of methyl orange (MO) were optimized. The MO adsorption equilibrium was reached after 240 min of contact time. Removal of MO is better at neutral pH than in acidic and alkaline solutions. Among the tested models, the equilibrium adsorption data are well fitted by the Langmuir isotherm. The adsorption kinetics is best described by the pseudo-second-order model. The evaluation of the thermodynamic parameters, i.e. ΔG^o, ΔH^o, and ΔS^o, revealed that MO adsorption was spontaneous, while the activation energy (20.98 kJ/mol) indicates a physical adsorption. The photodegradation of MO decreased from 100 mg/L down to 2 mg/L when the solution is exposed to visible light.     

Efficient photocatalytic degradation of methyl orange dye using facilely synthesized α-Fe2O3 nanoparticles

In this paper, α-Fe₂O₃ nanoparticles were fabricated via the combustion process using glucose and sucrose as organic fuels for the first time. The fabricated products were characterized using XRD, FT-IR, HR-TEM, and UV–vis spectrophotometer. The average crystallite size of the α-Fe₂O₃ samples, which were synthesized using glucose and sucrose fuels, is 27.25 and 6.13 nm, respectively. The HR-TEM images confirmed the presence of spherical and irregular shapes with an average diameter of 31.92 and 8.83 nm for the α-Fe₂O₃ samples, which were synthesized using glucose and sucrose fuels, respectively. The optical energy gap of the α-Fe₂O₃ samples, which were synthesized using glucose and sucrose fuels, is 2.00 and 2.48 eV, respectively. Additionally, the synthesized α-Fe₂O₃ samples were employed as a photocatalyst for the degradation of methyl orange dye under UV irradiations in the absence and presence of hydrogen peroxide. The optimum pH, irradiation time, and dose of α-Fe₂O₃ that achieved the highest degradation efficiency in the presence of hydrogen peroxide (82.17 % in the case of using an α-Fe₂O₃ sample which was synthesized using glucose or 95.31 % in the case of using an α-Fe₂O₃ sample which was synthesized using sucrose) are 3, 100 min, and 0.05 g, respectively.     

Efficient removal of anionic dye by protonated APTES modified hydrochar: The effect of cold-activation

The study focused on determining the effect of acidic and basic cold activation on hydrochar (HC) for the removal of methyl orange (MO). HC was prepared by hawthorn seeds (HS) under hydrothermal carbonization. HC was cold-activated with HCl and NaOH, respectively, and they were grafted with aminopropyltriethoxysilane (APTES) and protonated to obtain AHC-N⁺ (acid-activated and modified HC) and BHC-N⁺ (base-activated and modified HC) to determine the effect of acidic and basic activation. They were characterized by elemental analysis, IR, thermal analysis, zeta potential, N₂ adsorption–desorption measurements, and SEM–EDX analysis. The prepared adsorbents displayed MO adsorption due to abundant protonated amine groups. BHC-N⁺ showed higher MO adsorption than AHC-N⁺. The result showed that more protonated APTES groups grafted on the surface of HC via NaOH activation. The obtained data had a good fitting with the Langmuir isotherm and pseudo-second-order kinetic. The maximum adsorption capacity of BHC-N⁺ was 250.38 mg g⁻¹. The adsorption mechanism could be attributed to the electrostatic interactions between MO and protonated amine groups of APTES and hydrogen bonding.     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.     

还原橙3衍生物及其聚合物光伏性能的研究

还原橙3具有稠环结构,但是其在许多有机溶剂中的不溶性阻碍其作为光伏材料的使用.对还原橙3进行修饰得到还原橙3的衍生物4,10-双(4-己基-2-噻吩基)-6,12-双(二氰基亚乙烯基)二氢化蒽并蒽(TCVA),对TCVA的光电性能进行研究,结果表明,TCVA在紫外-可见光区有较强的吸收,循环伏安法表明TCVA的HOMO和LUMO能级分别为-6.04和-4.42eV,将其与P3HT共混制备太阳能电池,其效率为0.3%.将还原橙3衍生物作为受体单元制备D-A结构的给体聚合物聚4,10-双(4-己基-2-噻吩基)-6,12-双(二氰基亚乙烯基)二氢化蒽并蒽连2,6-双(三甲基锡)-4,4-二(2-乙基己基)二噻吩并[3,2-b:2',3'-d]噻咯(PTCVADTS),该聚合物有非常窄的带隙0.94eV,但是由于其LUMO能级较受体材料(6,6)-苯基-C61(71)-丁酸甲酯(PCBM)的LUMO能级小,阻碍了激子的分离,使电池器件的效率很低.