High-Performance Liquid Chromatographic Method for the Simultaneous Determination of Four Flavonols in Food Supplements and Pharmaceutical Formulations

A method using high-performance liquid chromatography with diode array detection (HPLC-DAD) as a powerful separation technique has been developed for the simultaneous determination of the four flavonols rutin, quercetin, kaempferol and isorhamnetin in food supplements and pharmaceutical formulations. The chromatographic separation was achieved in 36?min using a Symmetry C₁₈ column (250?×?3?mm; 5?µm) as the stationary phase and a mixture of methanol, acetonitrile, and pH 2.5 aqueous acetic acid as the mobile phase in gradient elution mode. The analytical wavelengths were 256?nm for rutin, quercetin and isorhamnetin, and 368?nm for kaempferol. An ultrasound-assisted extraction protocol was performed using methanol as solvent. The detection and quantification limits were lower than 0.03?µg mL^?1 and 0.08?µg mL^?1, respectively. The inter-day and intra-day precisions were less than 4.8 and 5.1%, respectively, and the average recoveries were in the range from 96 to 107%. The method was applied for the determination of the studied flavonols in food supplements and pharmaceutical preparations. The satisfactory recovery values demonstrate the potential of the developed method for the determination of the analytes in these samples. In addition, the method is suitable for routine quality control due its ease of operation.     

Highly Effective Detection of Amitraz in Honey by Using Surface-Enhanced Raman Scattering Spectroscopy Coupled with Chemometric Methods

As an effective and universal acaricide, amitraz is widely used on beehives against varroasis caused by the mite Varroa jacobsoni. Its residues in honey pose a great danger to human health. In this study, a sensitive, rapid, and environmentally friendly surface-enhanced Raman spectroscopy method (SERS) was developed for the determination of trace amount of amitraz in honey with the use of silver nanorod (AgNR) array substrate. The AgNR array substrate fabricated by an oblique angle deposition technique exhibited an excellent SERS activity with an enhancement factor of ∽10⁷. Density function theory was employed to assign the characteristic peak of amitraz. The detection of amitraz was further explored and amitraz in honey at concentrations as low as 0.08 mg/kg can be identified. Specifically, partial least square regression analysis was employed to correlate the SERS spectra in full-wavelength with C_amitraz to afford a multiple-quantitative amitraz predicting model. Preliminary results show that the predicted concentrations of amitraz in honey samples are in good agreement with their real concentrations. Compared with the conventional univariate quantitative model based on single peak’s intensity, the proposed multiple-quantitative predicting model integrates all the characteristic peaks of amitraz, thus offering an improved detecting accuracy and anti-interference ability.     

W掺杂ZnO电子结构与光学性质第一性原理计算

采用了基于密度泛函理论(DFT)的第一性原理平面波超软赝势方法,计算本征ZnO和不同W掺杂浓度下W:ZnO体系的电子结构和光学性质.计算结果表明:W掺杂可以提高ZnO的载流子浓度,从而改善ZnO的导电性.掺杂后,吸收光谱发生红移现象,且光学性质变化集中在低能量区,而高能量区的光学性质没有太大变化,计算结果与相关实验结果相符合.最后,结合电子结构定性分析了光学性质的变化.     

氧化锌电阻阀片中ZnO(002)/β-Bi_2O_3(210)界面结构的第一性原理研究

为了从物质微观结构上了解氧化锌避雷器阀片的性能,采用基于密度泛函理论的第一性原理方法对ZnO(002)/β-Bi_2O_3(210)界面结构进行弛豫和电子结构计算.结果表明弛豫后,原子间的键长发生改变.界面区域差分电荷密度图和原子布居分析可得ZnO层片中Zn原子电荷缺失,β-Bi_2O_3层片中O原子电荷富集,ZnO层片向β-Bi_2O_3层片转移电子电荷23.61e.晶界结构的内建电场由ZnO层片指向β-Bi_2O_3层片,内建电场是ZnO电阻阀片具有非线性伏安特性的重要原因.界面附近态密度表明界面的结合主要依靠ZnO层片中Zn原子与β-Bi_2O_3层片中O原子相互作用.计算显示ZnO(002)/β-Bi_2O_3(210)界面结合较强,界面能约为-4.203 J/m~2.本文研究结果对于研制高性能非线性伏安特性氧化锌电阻片提供了机理解释和理论支持.     

A study on electrodeposited of ZnO/ZnS heterostructures

ZnO/ZnS heterostructures were synthesized by a two steps electrochemical deposition method. Firstly, ZnS layer was deposited from an aqueous solution containing Na₂S₂O₃ and ZnSO₄ onto indium-doped tin oxide (ITO) coating glass substrate at two deposition potentials. Then, ZnO nanostructures were deposited from an aqueous solution of Zn(NO₃) onto ZnS surface. The as-obtained samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), Raman and UV-visible analysis. The results indicate that the electrodeposition of ZnS layer at ?0.9 V give the best proprieties of ZnO/ZnS heterostructures. Homogeneous and uniform surface of ZnO/ZnS heterostructure was confirmed by AFM images. The XRD patterns indicates a high crystallinity of ZnO/ZnS. A high transmittance of 65% was also noted from UV-Visible spectra and band gap energy as large as 3.6?eV was found.     

On‐chip technology for single‐cell arraying,electrorotation‐based analysis and selective release

This paper reports a method for label‐free single‐cell biophysical analysis of multiple cells trapped in suspension by electrokinetic forces. Tri‐dimensional pillar electrodes arranged along the width of a microfluidic chamber define actuators for single cell trapping and selective release by electrokinetic force. Moreover, a rotation can be induced on the cell in combination with a negative DEP force to retain the cell against the flow. The measurement of the rotation speed of the cell as a function of the electric field frequency define an electrorotation spectrum that allows to study the dielectric properties of the cell. The system presented here shows for the first time the simultaneous electrorotation analysis of multiple single cells in separate micro cages that can be selectively addressed to trap and/or release the cells. Chips with 39 micro‐actuators of different interelectrode distance were fabricated to study cells with different sizes. The extracted dielectric properties of Henrietta Lacks, human embryonic kidney 293, and human immortalized T lymphocytes cells were found in agreements with previous findings. Moreover, the membrane capacitance of M17 neuroblastoma cells was investigated and found to fall in in the range of 7.49 ± 0.39 mF/m².     

Probing nanocolumnar silver nanoparticle/zinc oxide hierarchical assemblies with advanced surface plasmon resonance and their enhanced photocatalytic performance for formaldehyde removal

Recent advances in photocatalysis focus on the development of materials with hierarchical structure and on the surface plasmon resonance (SPR) phenomenon exhibited by metal nanoparticles (NPs). In this work, both are combined in a material where size‐controllable Ag‐NPs are uniformly loaded onto the hierarchical microporous and mesoporous and nanocolumnar structures of ZnO, resulting in Ag‐NP/ZnO nanocomposites. The embedded Ag‐NPs slightly decrease the hydrophobicity of fibrous ZnO, improve its wettability, and increase the absorption of formaldehyde (H₂CO) onto the photocatalyst, all of this resulting in excellent photodegradation of formaldehyde in aqueous solution. Besides, we found that Ag‐NPs with optimal size not only accelerate the charge transfer to the surface of ZnO, but also strengthen the SPR effect in the intercolumnar channels of fibrous ZnO particles combining with high concentration of photo‐generated radical species. The micro‐to‐mesoporous ZnO is like a nanoarray packed Ag‐NPs. With Ag‐NPs of diameter 2.5 < ? < 6.5 nm, ZnO exhibits the most superior photodegradation rate constant value of 0.0239 min^?1 with total formaldehyde removal of 97%. This work presents a new feasible approach involving highly sophisticated Ag‐NP/ZnO architecture combining the SPR effect and hierarchically ordered structures, which results in high photocatalytic activity for formaldehyde photodegradation.     

Structure transition and photoluminescence of CdS/Si nanoheterostructure array on thermal annealing

CdS/Si heterojunctions have been prepared through growing CdS nanocrystallites (nc-CdS) on the silicon nanoporous pillar array (Si-NPA) by the chemical bath deposition method. Cadmium nanocrystallites (nc-Cd) have been observed and ascribed to the reducibility of Si-NPA. The reason for the appearance of CdO is indistinct and the related work will be done in the future. The blue, green and red emissions are ascribed to the silicon oxide layer, band gap of nc-CdS and the sulphur vacancies, respectively. Redshift and blueshift with the annealing temperature about green emissions are contributed to quantum size effect and the structure transition from nc-Cd to CdO. It is beneficial for investigating the structures and defects to the application of CdS/Si in the optoelectronic field.     

Negative Charging of Au Nanoparticles during Methanol Synthesis from CO2/H2 on a Au/ZnO Catalyst: Insights from Operando IR and Near‐Ambient‐Pressure XPS and XAS Measurements

The electronic and structural properties of Au/ZnO under industrial and idealized methanol synthesis conditions have been investigated. This was achieved by kinetic measurements in combination with time‐resolved operando infrared (DRIFTS) as well as in situ near‐ambient pressure X‐ray photoelectron spectroscopy (NAP‐XPS) and X‐ray absorption near‐edge spectroscopy (XANES) measurements at the O K‐edge together with high‐resolution electron microscopy. The adsorption of CO during the reaction revealed the presence of negatively charged Au nanoparticles/Au sites during the initial phase of the reaction. Near‐ambient‐pressure XPS and XANES demonstrate the build‐up of O vacancies during the reaction, which goes along with a substantial increase in the rate of methanol formation. The results are discussed in comparison with previous findings for Cu/ZnO and Au/ZnO catalysts.     

A facile approach to fabricate and embed multifunctional nano ZnO into soap matrix and liquid cleansing products for enhanced antibacterial and photostability for health and hygiene applications

This research demonstrates, a facile approach to fabricate the nano ZnO system in an unique combination of surfactant-polyol-assembly (SPA) acting as a caging agent restricting the ZnO crystallite size in nano-regime. This SPA is suitable for health and hygiene products and such optimized technique is among the very few researches exploring the impact of embedding low concentrations of nano ZnO system into the matrix of sodium salt of long chain fatty acids (soap bar) and liquid cleansing personal care products. The fabricated nano ZnO in SPA and infused products were systematically characterized using various advanced and appropriate techniques. The hexagonal wurtzite structure of nano ZnO-SPA is evaluated based on XRD pattern which also exhibit an average crystallite size as 20.18 nm and high specific surface area as 52.99 m²/g. The SEM-supported morphological assessment confirms the formation of agglomerates of ultrafine ZnO rods and spherical particles. Novel nano ZnO having wideband gap energy (3.66 eV) embedded in soap bar act as a UV-blocker preventing the oxidation of unsaturated long chain fatty acids. Soap bar without ZnO experienced degradation and reduction in whiteness to 17.85% whereas 2.5 mg/g nano ZnO infused soap shows the reduction to 7.9% which clearly reflects the increased photostability of soap bar. The antibacterial efficacy of nano ZnO-SPA and infused products are investigated against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) by Zone of Inhibition (ZOI) and European standard EN:1276. Infused products exhibited high antibacterial efficacy up to 4.43 log reduction equivalent to >99.99% germ kill.