Piezoelectric Nanogenerator Based on Electrospun Cellulose Acetate/Nanocellulose Crystal Composite Membranes for Energy Harvesting Application

Nanogenerators, as the typical conversion of mechanical energy to electrical energy devices, have great potential in the application of providing sustainable energy sources for powering miniature devices. In this work, cellulose acetate/cellulose nanocrystal(CA/CNC) composite nanofiber membranes were prepared by electrospinning method and then utilized to manufacture a flexible pressure-driven nanogenerator. The addition of CNC not only increased the content of piezoelectric cellulose I crystallization but also strengthened the mechanical deformation of the nanofiber membranes, which could greatly enhance the piezoelectric performance of CA/CNC composite membranes. The CA/CNC composite nanofiber membrane with 20%(mass fraction) of CNC(CA/CNC-20%) showed optimal piezoelectric conversion performance with the output voltage of 1.2 V under the force of 5 N(frequency of 2 Hz). Furthermore, the output voltage of the CA/CNC-20% nanogenerator device exhibited a linear relationship with applied impact force, indicating the great potential in pressure sensors.     

Acetate chitosan with CaCO3 doping form tough hydrogel for hemostasis and wound healing

In recent years, chitosan has been applied for wound management due to its properties of biocompatibility, biodegradability, antimicrobial activity, and low immunogenicity. But the poor water solubility in neutral pH limited its further application in clinical wound healing. To overcome this problem, acetate chitosan was developed and approved as commercial products for wound healing. However, the acidity of acetate chitosan was potentially allergenic, and the poor mechanical properties of its formed hydrogels also hindered the therapeutic efficacy in wound care. In this study, CaCO₃ was simply doped into acetate chitosan to form the wound dressing. After absorbing water, the H⁺ of acetate chitosan reacted with CaCO₃ to release Ca²⁺, resulting in acidity decreased. The production of Ca²⁺ and residue of CaCO₃ cross‐linked with chitosan to form a tough hydrogel by electrostatic interaction. The physical characteristics, swelling, mechanical testing, and blood clotting were evaluated. The results in vitro demonstrated that after doping CaCO₃ into acetate chitosan, the mechanical properties and blood clotting of the formed hydrogel were increased. Then, the evaluation of hydrogels in vivo revealed that it can also accelerate the wound healing by promoting re‐epithelization and collagen deposition. This simple way by doping CaCO₃ into acetate chitosan can increase wound healing, and it can also broad the application of acetate chitosan in clinical use.     

Nucleophilic fluoroalkylation of terminal vinyl triflones with SO2CF3 as a removable activating group

Terminal vinyl triflones served as excellent Michael addition acceptors which readily reacted with difluoromethylene phosphabetaine and di- or mono-fluoroalkyl bromides to afford compounds containing CF₂ or CF groups. This fluoroalkylation is characterized by mild reaction conditions, ready availability of reagents and excellent functional-group tolerance.     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

Temperature memory effect and its stability revealed via differential scanning calorimetry in ethylene‐vinyl acetate within glass transition range

In this article, we reveal the temperature memory effect (TME) in a commercial thermoplastic polymer, namely ethylene‐vinyl acetate (EVA), within its glass transition range via a series of differential scanning calorimeter (DSC) tests. In addition, we investigate the influence of heating holding time and also compare the observed TME in current study with that of shape memory alloys (SMAs). It is concluded that the TME via DSC (without any macroscopic shape change) is achievable within the glass transition range of a polymer. Conversely, although the observed TME shares the many similar features as those in SMAs, due to the nature of micro‐Brownian motion in the glass transition of polymers, the resulted TME is strongly affected by the heating holding time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1731–1737     

Highly diastereoselective multicomponent synthesis of polysubstituted 2-hydroxy-2-trifluoromethylpiperidineswith four and five stereogenic centers

The Michael–Mannich cascade cyclization of cyano olefins, ethyl 4,4,4-trifluoro-3-oxobutanoate, aromatic aldehydes and ammonium acetate provides convenient stereoselective formation of ethyl 5,5-dicyano-4,6-diaryl-2-hydroxy-2-(trifluoromethyl)piperidine-3-carboxylates with fourstereogenic centers and dialkyl 4,6-diaryl-5-cyano-2-hydroxy-2-(trifluoromethyl)piperidine-3,5-dicarboxylates with five stereogenic centers. Ammonium acetate plays dual role, acting as a base and as a nitrogen source.     

Emulsion Copolymerization of Vinyl Acetate and Vinyl Silanes: Kinetics and Development of Microstructure

The batch emulsion copolymerization of vinyl acetate with different vinyl silane functional monomers (vinyl trimethoxysilane [VTMS], vinyl triethoxysilane [VTES], and vinyl silanetriol [VSTO]) is studied. The nature of the silane strongly affects the development of the microstructure and crosslinking ability of the latexes. A combination of techniques (Soxhlet extraction, centrifugation, assymetric‐flow field flow fractionation AF4/MALS/RI) shows that the factor controlling the molar mass and crosslinking density is the degree of hydrolysis of the alkoxysilane, producing higher molar masses and degrees of crosslinking when the degree of hydrolysis is high. Thus, the copolymer containing VSTO produced a very crosslinked latex, the one with VTMS produced a latex with a low degree of crosslinking in the wet state that can yield high degrees of crosslinking upon drying, and the latex with VTES do not produce significant amounts of crosslinking neither before nor after drying.     

“翻转+分段式”有机化学实验教学设计及实践研究

以FeCl3·6H2O催化合成乙酸乙酯为教学内容,采用“翻转+分段式”混合教学方法对整个实验过程进行了改革探索。通过教师准备学习资源,学生自主学习,课堂分段讲解,互动交流以及跟踪评价等,探讨了大学有机化学实验实施“翻转+分段式”混合教学方法的有效途径。实践结果表明:混合教学模式能够显著促进学生对实验内容的理解和掌握,明显增加学生自主操作的时间,还能有效降低实验过程中的安全隐患。     

Eco‐friendly,ultrasound‐assisted,and facile synthesis of one‐pot multicomponent reaction of acridine‐1,8(2H,5H)‐diones in an aqueous solvent

A one‐pot, multistep synthesis of acridine‐1,8(2H,5H)‐diones ( 4a–m ) was achieved by three‐component reaction of dimedone ( 1 ) with an aromatic aldehyde ( 2a–m ) and an ammonium acetate ( 3 ) using water as a green solvent without any catalyst and a simple, easily handled, and ultrasonic technique as well as conventional method.     

将密度泛函理论计算纳入高等化学教学初探——对乙酸乙酯碱性水解机理的理论研究

使用Gaussian 09软件对乙酸乙酯碱性水解反应的机理进行了研究。本研究融合了本科教学中有机化学、物理化学和结构化学的相关知识,以乙酸乙酯水解机理为问题导向,阐述了研究和解决问题的思路和方法,探索了将第一性原理计算引入高等教育的方式。