Performance evaluation of functionalized ordered mesoporous silica for VOCs adsorption by molecular dynamics simulation

Volatile organic compounds (VOCs) are growing pollutants now that cause the serious environmental pollution and threaten human health. The functionalized ordered mesoporous silica (FOMS) has attracted considerable attention in adsorbing VOCs. In this paper, the molecular dynamics simulation was used to simulate the adsorption performance of FOMS on VOCs (acetone, ethyl acetate and toluene). After simulating different pore sizes (2 nm, 3 nm and 4 nm) adsorption performances of ordered mesoporous silica (OMS) on VOCs, OMS with a pore size of 4 nm was selected to further study the influence of functional groups (vinyl, methyl, and phenyl). The following law was obtained: the saturated adsorption capacities of vinyl-functionalized OMS (V-FOMS) to acetone, ethyl acetate and toluene were 3.045 mmol.g^?1, 2.568 mmol.g^?1 and 1.976 mmol.g^?1 respectively; the saturated adsorption capacities of methyl-functionalized OMS (M-FOMS) to acetone, ethyl acetate and toluene were 2.798 mmol.g^?1, 2.312 mmol.g^?1 and 1.698 mmol.g^?1 respectively; the saturated adsorption capacities of phenyl-functionalized OMS (P-FOMS) to acetone, ethyl acetate and toluene were 2.124 mmol.g^?1, 1.941 mmol.g^?1 and 1.539 mmol.g^?1 respectively. These results show that the adsorption ability of FOMS for different adsorbates follows the sequence of acetone > ethyl acetate > toluene. Furthermore, the interaction between functional groups (vinyl, methyl and phenyl) in FOMS and VOCs was explored. It is found that the interaction between different functional groups and adsorbates is different (interaction energy effect). This interaction energy effect promotes FOMS to better adsorb VOCs. This work would provide fundamental understanding and guidance for the development of novel adsorption materials for the adsorption of VOCs.     

The use of proton transfer reaction mass spectrometry for high throughput screening of terpene synthases

In this work, we introduce the application of proton transfer reaction mass spectrometry (PTR-MS) for the selection of improved terpene synthase mutants. In comparison with gas chromatography mass spectrometry (GC-MS)-based methods, PTR-MS could offer advantages by reduction of sample preparation steps and analysis time. The method we propose here allows for minimal sample preparation and analysis time and provides a promising platform for the high throughput screening (HTS) of large enzyme mutant libraries. To investigate the feasibility of a PTR-MS-based screening method, we employed a small library of Callitropsis nootkatensis valencene synthase (CnVS) mutants. Bacterial cultures expressing enzyme mutants were subjected to different growth formats, and headspace terpenes concentrations measured by PTR-Qi-ToF-MS were compared with GC-MS, to rank the activity of the enzyme mutants. For all cultivation formats, including 96 deep well plates, PTR-Qi-ToF-MS resulted in the same ranking of the enzyme variants, compared with the canonical format using 100 mL flasks and GC-MS analysis. This study provides a first basis for the application of rapid PTR-Qi-ToF-MS detection, in combination with multi-well formats, in HTS screening methods for the selection of highly productive terpene synthases.     

热脱附-气相色谱-质谱法应用于工业源废气中挥发性有机物的目标和非目标筛查

建立了固相吸附热脱附-气相色谱-质谱(TD-GC-MS)综合筛查工业源废气中挥发性有机物(VOCs)的方法。对两种型号的固相吸附管进行了比较,最终选择使用Tenax SS TD Tubes吸附管。气体样品以恒定流速通过吸附管,富集分析物,经热脱附后,用GC-MS进行检测,目标化合物以内标法定量,非目标化合物的含量以甲苯的响应系数计算。方法检出限为1.06~5.44 ng,以采样体积300 mL计算,目标化合物的检出限为0.004~0.018 mg/m~3。吸附管平均加标回收率为78.4%~89.4%,相对标准偏差为3.9%~14.4%(n=7)。应用该方法对大连市某垃圾焚烧发电厂排放的废气进行VOCs目标及非目标化合物综合筛查,共检出29种VOCs,其中仅5种VOCs为预先设定的目标化合物,另外24种为非目标化合物,5种目标化合物含量仅占所有检出物总量的26.7%。证明了工业源废气VOCs分析中非目标化合物筛查的重要性,该研究思路对完整测定工业源挥发性有机污染物分布具有一定的借鉴意义。     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

紫外光离子源-高场不对称波形离子迁移谱检测环境中挥发性有机物

本研究采用紫外光离子源-高场不对称波形离子迁移谱(UV-FAIMS)快速检测环境中挥发性有机物.选取苯和对二甲苯为研究对象,并分析了分离电压、流速等因素对其分离识别的影响.实验结果表明:当分离电压值为0～1200 V时,苯和对二甲苯信号强度逐渐降低,而特征补偿电压值却逐渐增加.实验选取分离电压值为900 V,当载气流速为0～240 L/h时,苯和对二甲苯的特征离子峰信号强度逐渐增加,当载气流速为0～120 L/h时,苯和对二甲苯团簇峰信号强度增加,当载气流速为120～240 L/h时,苯的团簇峰信号强度增加,而对二甲苯的团簇峰信号强度降低.此外,对样品浓度、信号强度与噪声的比值进行探讨,获得UV-FAIMS检测苯的检测限为0.011mg/m3.     

Determination of Volatile Organic Compounds by a Novel Polymer Spin-Coated Thin Film and Surface Plasmon Resonance

Here, the synthesis, characterization, and volatile organic compound (VOCs) sensing of a 1,3-dimethyl polyphenylene vinylene polymer is reported. The synthesis was performed by a Witting condensation through the reaction of 1,4-terphthaldehyde with the phosphonium chloride of meta-xylene. The material was characterized by infrared spectroscopy, elemental analysis, and thermogravimetric analyses. Thin films of the polymer were prepared by spin coating at speeds from 1000 to 5000?rpm. Ultraviolet–visible spectroscopy and surface plasmon resonance were used to characterize the spin-coated films. The thicknesses of the films were estimated by fitting the curves and were between 4.5 and 24.5?nm depending on the speed. The refractive index of the new polymer was 1.72. The polymer spin-coated films were exposed to volatile organic vapors to characterize their sensing properties by surface plasmon resonance as a function of time. The results showed that the new material responded rapidly, sensitively, and reversibly to VOCs.     

Interrelationship between total volatile organic compounds emissions,structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides

Natural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170 °C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements, followed by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Total volatile organic compounds (TVOCs) emissions were determined using headspace analysis integrated with gas chromatography with flame ionization detector. Determined TVOCs emissions varying in range 21.6–52.1 μg/g and generally value of this parameter decreased with increasing content of PCL phase in studied blends or with application of more efficient di(tert-butylperoxyisopropyl)benzene peroxide as cross-linking agent. It was found that increasing of TVOCs parameter indicated deterioration of mechanical properties of NR/PCL blends, which corresponded with the changes in chemical structure and thermal properties of cross-linked NR/PCL. This confirms that evaluation of TVOCs parameter is interesting alternative for “conventional methods” to characterization of the studied bio-based blends.     

Adsorption of Volatile Organic Compounds (VOCs) on Oxygen-rich Porous Carbon Materials Obtained from Glucose/Potassium Oxalate

To investigate the effects of oxygen-containing functional groups on the adsorption of volatile organic compounds (VOCs) with different polarity, oxygen-rich porous carbon materials (OPCs) were synthesized by heat treatment of glucose/potassium oxalate material. The carbon material had a large specific surface area (1697 m² g⁻¹) and a high oxygen content (18.95 at.%). OPC exhibited high adsorption capacity of toluene (309 mg g⁻¹) and methanol (447 mg g⁻¹). The specific surface area and total pore volume determined the adsorption capacity of toluene and methanol at the high-pressure range, while the oxygen-containing groups became the main factor affecting the methanol adsorption at the low-pressure range due to the hydrogen bond interaction through the density functional theory (DFT) calculations. This study provides an important hint for developing a novel O-doped adsorbent for the VOCs adsorption applications and analyzing the role of oxygen-containing groups in the VOCs adsorption under the low-pressure range.     

基于ZIF-8/PAN复合薄膜的柔性丙酮气体传感器

ZIF-8是一种Zn基金属有机骨架材料, 可以吸附丙酮气体从而作为电容式丙酮传感器的气敏材料, 然而ZIF-8的传统使用形式为粉末态, 这导致其不能成为具备柔性的整体, 从而限制了传感器的柔性. 结合包埋种子和二次生长法将ZIF-8与纳米纤维结合成纤维型柔性材料, 并将其作为气敏层制备了柔性电容式丙酮气体传感器. 该传感器在9种常见挥发性有机化合物中表现出良好的选择性, 对250~2000 cm³/m³的丙酮气体具有灵敏的响应、良好的循环响应及长期稳定性. 值得注意的是该柔性传感器不仅在室温下进行传感, 而且在弯折180°的状态下对丙酮气体的响应值与不弯折(0°)状态下几乎一致, 在200次以内的180°弯折-恢复后同样表现出了传感性能的稳定, 表明了其在柔性传感器方面的潜力.     

A review of recent advances in catalytic combustion of VOCs on perovskite-type catalysts

Along with the rapid development of industry, VOCs gradually move into the spotlight, and now become a kind of harmful environmental pollutants that cannot be overlooked. This paper introduces the hazards of VOCs and the common catalytic combustion catalysts, noble metal catalysts and non-noble metal catalysts, for the elimination of VOCs. Perovskite catalysts, as one of the non-noble catalysts, play an important role in the field of catalytic combustion in recent years. According to the classification of elements doping in perovskites, the research achievements in the past five years were analyzed and reviewed. In addition, this paper also analyzes and elaborates the reaction kinetics and QSAR/QSPR models for the introduction of structural properties and reaction mechanisms.