纳米Pd的形貌和尺寸可控制备及其1,4-丁炔二醇加氢性能

采用化学还原法合成Pd纳米立方体,并将其作为晶种,进一步合成大尺寸的纳米Pd立方体以及具有不同{100}和{111}晶面比例的纳米Pd多面体.将形貌和尺寸可控的纳米Pd溶胶应用于1,4-丁炔二醇催化加氢的反应中,反应结果表明,纳米Pd的催化性能取决于其尺寸和形貌.{111}晶面的催化活性高于{100}晶面,PVP稳定的Pd胶体对1,4-丁烯二醇均具有较高选择性,具有适当{100}和{111}晶面比例的纳米Pd多面体对1,4-丁烯二醇的选择性可达96%.     

ZnO nanocubes with (1 0 1) basal plane photocatalyst prepared via a low-frequency ultrasonic assisted hydrolysis process

The crystallographic plane of the ZnO nanocrystals photocatalyst is considered as a key parameter for an effective photocatalysis, photoelectrochemical reaction and photosensitivity. In this paper, we report a simple method for the synthesis of a new (1 0 1) high-energy plane bounded ZnO nanocubes photocatalyst directly on the FTO surface, using a seed-mediated ultrasonic assisted hydrolysis process. In the typical procedure, high-density nanocubes and quasi-nanocubes can be grown on the substrate surface from a solution containing equimolar (0.04 M) zinc nitrate hydrate and hexamine. ZnO nanocubes, with average edge-length of ca. 50 nm, can be obtained on the surface in as quickly as 10 min. The heterogeneous photocatalytic property of the sample has been examined in the photodegradation of methyl orange (MO) by UV light irradiation. It was found that the ZnO nanocubes exhibit excellent catalytic and photocatalytic properties and demonstrate the photodegradation efficiency as high as 5.7 percent/μg mW. This is 200 times higher than those reported results using a relatively low-powered polychromatic UV light source (4 mW). The mechanism of ZnO nanocube formation using the present approach is discussed. The new-synthesized ZnO nanocubes with a unique (1 0 1) basal plane also find potential application in photoelectrochemical devices and sensing.     

Solution-phase synthesis of silver nanodiscs in HPMC-matrix and simulation of UV-vis extinction spectra using DDA based method

Present investigation demonstrates a very simple seed-mediated route, using hydroxypropyl methyl cellulose (HPMC) as stabilizing agent, for the synthesis of silver nanodiscs in aqueous solution. Central to the concept of seed-mediated growth of nanoparticles is that small nanoparticle seeds serve as nucleation centres to grow nanoparticles to a desired size and shape. It is found that the additional citrate ions in the growth solution play the pivotal role in controlling the size of silver nanodiscs. Similar to the polymers in the solution, citrate ions could be likewise dynamically adsorbed on the growing silver nanoparticles and promote the two-dimensional (2D) growth of nanoparticles. Morphological, structural, and spectral changes associated with the seed-mediated growth of the nanoparticles in the presence of HPMC are characterized using UV–vis and TEM spectroscopic studies. Metal nanoparticles have received increasing attention for their peculiar capability to control local surface plasmon resonance (LSPR) when interacting with incident light waves. Extensive simulation study of the UV–vis extinction spectra of our synthesized silver nanodiscs has been carried out using discrete dipole approximation (DDA) methodology.     

Seed-mediated synthesis of uniform ZnO nanorods in the presence of polyethylene glycol

Large quantities of ZnO nanorods have been synthesized by the seed-mediated method in the presence of polyethylene glycol at 90 °C. The products are characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and high-resolution transmission electron microscopy. The as-grown ZnO nanorods are uniform with a diameter of 40–70 nm and length about 2 μm. The nanorods grew along the [0 0 1] direction. Possible roles of ZnO seeds and polymer in the growth of ZnO nanorods are also discussed.     

海胆针状金纳米颗粒用于电催化二氧化碳还原

采用不加表面活性剂的种子介导生长策略合成了具有针状结构的金纳米颗粒, 其针尖处的尖端电场效应能有效富集电解质阳离子并提高二氧化碳局部浓度, 从而提高催化剂的电流密度和一氧化碳选择性, 在 -0.6 V(vs. RHE)时的法拉第效率可以达到96%. 电化学性能测试结果表明, 其高选择性不仅来源于丰富的表面缺陷, 更主要源于其独特的针状结构所带来的尖端电场效应.     

Attachment of gold nanoparticles onto indium tin oxide surfaces controlled by adding citrate ions in a seed-mediated growth method

A simple approach to control the attachment of gold nanoparticles (AuNPs) onto the indium tin oxide (ITO) surfaces is reported. Adjusting the concentration of trisodium citrate in the Au colloid solution for the seeding process from 1 to 50 mM in the seed-mediated growth method, the dramatic changes in the SEM images and actual color were observed indicating the changes in nanostructures of AuNPs formed on the ITO surfaces. Whereas the attachment of smaller AuNPs with higher density were observed when 25 mM citrate ions were added in the seed solution, larger AuNPs were observed to attach at 50 mM. On the basis of this difference and the surface SEM images observed just after seeding, the roles of citrate ions were discussed. Consequently, it was inferred that the citrate ions affected the growth process as well as the seeding process. The repulsive power expected from the increased negative charges of citrate ions were not significant, but rather the dense attachment was promoted as the peculiar effect of citrate ions. Such control of the AuNPs attachment on ITO would be practically effective because the dense attachment can be performed by just changing the composition of the seed solution.     

Seed-mediated synthesis of copper nanoparticles on carbon nanotubes and their application in nonenzymatic glucose biosensors

In this paper, for the first time, Cu nanoparticles (CuNPs) were prepared by seed-mediated growth method with Au nanoparticles (AuNPs) playing the role of seeds. Carbon nanotubes (CNTs) and AuNPs were first dropped on the surface of glassy carbon (GC) electrode, and then the electrode was immersed into growth solution that contained CuSO₄ and hydrazine. CuNPs were successfully grown on the surface of the CNTs. The modified electrode showed a very high electrochemical activity for electrocatalytic oxidation of glucose in alkaline medium, which was utilized as the basis of the fabrication of a nonenzymatic biosensor for electrochemical detection of glucose. The biosensor can be applied to the quantification of glucose with a linear range covering from 1.0 × 10⁻⁷ to 5 × 10⁻³ M and a low detection limit of 3 × 10⁻⁸ M. Furthermore, the experiment results also showed that the biosensor exhibited good reproducibility and long-term stability, as well as high selectivity with no interference from other oxidable species.     

Direct monitoring of gold nanorod growth

The seed-mediated growth of gold nanorods is shown to be strongly dependent on the reaction time and chemical environment of the reaction solution. The versatile seed-mediated approach in aqueous surfactant solutions has been used in this study for the synthesis of gold nanorods. Changes in the aspect ratio of gold nanorods were reflected in shifts of the plasmon resonance peaks and were monitored using UV-Visible absorption spectroscopy (UV-Vis) to follow the different stages of gold nanorod formation as a function of time and varying amounts of silver ion. Unlike the use of strong reducing agents to make spherical gold nanoparticles, the growth of gold nanorods requires weak reducing conditions, leading to an unknown degree of gold reduction. Therefore, cyclic voltammetry was used to electrochemically interrogate the entire reaction from gold seed to gold nanorod as a function of time. Data obtained revealed that time-dependent gold species are involved in gold nanorod formation.     

Seed-mediated synthesis, properties and application of γ-Fe2O3-CdSe magnetic quantum dots

Seed-mediated growth of fluorescent CdSe quantum dots (QDs) around γ-Fe₂O₃ magnetic cores was performed at high temperature (300 °C) in the presence of organic surfactants. Bi-functional magnetic quantum dots (MQDs) with tunable emission properties were successfully prepared. The as-synthesized MQDs were characterized by high-resolution transmission electron microscopy (HRTEM) and dynamic light scattering (DLS), which confirmed the assembly of heterodimers. When a longer growth period was employed, a homogeneous dispersion of QDs around a magnetic nanoparticle was obtained. The magnetic properties of these nanocomposites were examined. The MQDs were superparamagnetic with a saturation magnetization of 0.40 emu/g and a coercivity of 138 Oe at 5 K. To demonstrate their potential application in bio-labeling, these MQDs were coated with a thin silica shell, and functionalized with a polyethylene glycol (PEG) derivative. The functionalized MQDs were effectively used for the labeling of live cell membranes of 4T1 mouse breast cancer cells and HepG2 human liver cancer cells.     

Tuning the size,concaveness, and aspect ratio of concave cubic gold nanoparticles produced with high reproducibility

Reproducible fabrication of concave cubic gold nanoparticles with precise control over size, concaveness, and aspect ratio is important because the nanoscale structural characteristics can influence their plasmonic and catalytic properties. However, this is particularly challenging because the number of synthetic parameters involved in the fabrication strategy adds complexity to the reaction mechanism. Here, we introduce a simplified seed-mediated method and uncover the unknown conceptual insights on how the different halides and their concentration influence the surface structure and stability of underpotential silver monolayer deposited on the high energy facets of nanoparticles. The results reveal that adding Br^? and I^? ions to growth solution offers a predominant way to control the reaction kinetics and engineering nanoparticles with a predefined size, morphology, concaveness, aspect ratio, and plasmonic properties. Using spectroscopy and microscopy techniques, we shed new light on the reaction kinetics of concave cubic gold nanoparticles using the combined influence of silver underpotential deposition and halides. The strategy developed here can be expanded to fabricate gold nanoparticles of complex geometries. The results from our electromagnetic calculations suggest that the self-assembled superstructure of concave cubic gold nanoparticles can be more appealing for developing an ultra-sensitive sensing platform than to self-assembled superstructures of truncated cubic gold nanoparticles.