Effects of polyethyleneimine-functionalized MCM-41 on flame retardancy and thermal stability of polyvinyl alcohol

Hyperbranched polyethylenimine (PEI)-functionalized mesoporous silica (MCM@PEI) was synthesized and used to produce poly(vinyl alcohol) (PVA) nanocomposites. The modified nanofiller was characterized with infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N₂ adsorption. When compared with pure mesoporous silica (MCM), the MCM@PEI nanoparticles exhibited better dispersion in the PVA matrix. The effects of MCM@PEI on the thermal and flame properties of PVA nanocomposites were also studied. Improvement in the thermal properties was confirmed by enhanced thermal stability and char yield. Incorporation of MCM@PEI in PVA led to a significant drop in the heat release rate and the total heat release.     

Green synthesis and physical properties of crystalline silica engineering nanomaterial from rice husk (agriculture waste) at different annealing temperatures for its varied applications

Crystalline nano silica (SiO₂) was synthesized using a cost-effective eco-friendly method from agricultural waste material like rice husk. Polymer nanocomposite has been prepared using the sol-gel technique from crystalline nano silica using PVA as a polymer binder. Thermal analysis measurement is employed to investigate thermal stability. The XRD analysis shows the crystalline nature of silica is revealed to have characteristic peaks of SiO₂. The particle size was evaluated using Schererr's formula and found to be in the range of 21–31 nm. FTIR measurement shows the presence of O–Si–O (silane) bond formation. The PL measurement shows broad excitation prominently in the visible region. In the XRD pattern, a major peak of the Nanocomposite is observed at an angular position of 19.5° degree, which is more prominent than that of the PVA with the addition of 0.2 wt percent Nano silica to the PVA composite. SEM provides information on homogeneous distribution. This could be beneficial in terms of higher mechanical qualities as well as multifunctional properties. By hydrogen bonding, the PVA molecules are strongly linked to each SiO₂ nanoparticle as measured by FTIR. The stability of materials is confirmed by Zeta Potential and DLS. In the photoluminescence property of SiO₂-PVA crystalline Nano silica composite is excited using a radiation wavelength of 200 nm. The indirect bandgap was determined to be 4.28 eV which could be attributed to the 1100 °C annealing temperature. Such materials may be used as a semiconductor material obtained from a direct natural source, rice husk. Thus, in the present research structural, physical, and optical properties of crystalline nano silica and its polymer composite are explored, which leads us to prepare technological grads material from agricultural waste for varied applications including Agriculture to medical science.     

The effect of polyvinyl alcohol (PVA) on the optical,electrical and solid state properties of copper zinc tin sulfide (CZTS) deposited by sensitive spray pyrolysis (SSP)

Recently, the use of CZTS as the basis for other generation of low cost thin films solar cells has stimulated further researches. Its excellent p-type absorber nature, relatively high absorption coefficient and ideal energy band-gap of 1.5eV motivated these efforts. Additionally, CZTS consist of earth-abundant, cheap and non-toxic elements with very low manufacturing cost. Initially, copper indium gallium selenide (CIGS) solar cell device emerged but suffered limitations in further development because of rare indium and gallium in the device structure therefore, CZTS is recently preferred as an alternative to CIGS commercial solar cell absorber layer. In this work, solution mixture of CZTS and PVA was deposited on a substrate at temperature of 150 °C. Sensitive spray pyrolysis was used to grow the thin films where calculated amount of the precursor mixture was allowed to fall and be deposited on a heated substrate to form CZTS/PVA thin films. Subsequently, the thin film samples were annealed at a temperature of 200^oCfor 1 h to achieving pure crystalline thin film formation. SEM, XRD analysis, Optical, Solid State properties and Raman analysis were studied. The XRD analysis showed that the thin films fell into the pure kesterite structure of CZTS. Results show that produced thin films exhibited higher absorption coefficient and optical conductivity than pure CZTS, 10⁶ m^?1 and 10¹⁴(S^?1) against 10⁴cm^?1 and 10¹²(S^?1) respectively. The band-gap is between 1.53eV and 1.73eV. Using a PVA concentration of 0.05 M yielded highest absorbance and optical conductivity with lowest real dielectric constant and transmittance. These improved optical, electrical and solid state properties suitably qualify these thin films as absorber layer material for solar cell applications.     

Role of PVA in synthesis of nano Co3O4‐decorated graphene oxide

Polymeric materials have been found to be ideal candidates for the synthesis of organic–inorganic nanomaterials. We have obtained Co₃O₄‐decorated graphene oxide (GO) nanocomposites by a simple polymer combustion method. Polyvinyl alcohol (PVA) of two different molecular weights, 14,000 and 125,000, was used for the synthesis. The pristine sample was annealed at 300, 500, and 800°C. PVA has played an important role in the formation of GO and Co₃O₄ nanoparticles. Synthesized Co₃O₄–GO nanocomposites were characterized by X‐ray diffraction, Fourier transform infrared, Raman, electron paramagnetic resonance, transmission electron microscopy, and vibrating sample magnetometry. Reflection peaks at 12° and 37° in an X‐ray study confirm the formation of Co₃O₄–GO. Raman study validates the presence of GO in nanocomposites of Co₃O₄–GO. Room temperature ferromagnetism was observed in all annealed samples. The highest coercivity of 462 G was observed for 300°C annealed samples as compared with bulk Co₃O₄. On the basis of the results obtained, a mechanism of formation is proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Impact of the Type of Crosslinking Agents on the Properties of Modified Sodium Alginate/Poly(vinyl Alcohol) Hydrogels

Here, we report on studies on the influence of different crosslinking methods (ionic and chemical) on the physicochemical (swelling ability and degradation in simulated body fluids), structural (FT-IR spectra analysis) and morphological (SEM analysis) properties of SA/PVA hydrogels containing active substances of natural origin. First, an aqueous extract of Echinacea purpurea was prepared using a Soxhlet apparatus. Next, a series of modified SA/PVA-based hydrogels were obtained through the chemical crosslinking method using poly(ethylene glycol) diacrylate (PEGDA, M_n = 700 g/mol) as a crosslinking agent and, additionally, the ionic reaction in the presence of a 5% w/v calcium chloride solution. The compositions of SA/PVA/E. purpurea-based hydrogels contained a polymer of natural origin—sodium alginate (SA, 1.5% solution)—and a synthetic polymer—poly(vinyl alcohol) (PVA, M_n = 72,000 g/mol, 10% solution)—in the ratio 2:1, and different amounts of the aqueous extract of E. purpurea—5, 10, 15 or 20% (v/v). Additionally, the release behavior of echinacoside from the polymeric matrix was evaluated in phosphate-buffered saline (PBS) at 37 °C. The results indicate that the type of the crosslinking method has a direct impact on the release profile. Consequently, it is possible to design a system that delivers an active substance in a way that depends on the application.     

Unexpected Secondary Nucleation in Poly(Vinyl acetate) Nanoparticle Synthesis by Ab Initio Batch Emulsion Polymerization Using Poly(Vinyl alcohol) as Surfactant

Kinetic aspects of the vinyl acetate ab initio batch emulsion polymerization using poly(vinyl alcohol) to produce polymer nanoparticles are studied. The initial nucleation step is followed by limited coagulation and then by the generation of new particles. It seems that this is the first report of secondary nucleation phenomenon occurring in the system under study in batch mode. To explain this phenomenon, a mathematical model that allows to determine whether certain polymerization conditions and the presence/absence of a steric barrier, can lead or not to significant secondary nucleation is developed. It is deduced that the effect of such steric barrier on the free‐radical entry process plays a key role on the observed phenomenon.     

GO/PVA nanocomposites with significantly enhanced mechanical properties through metalion coordination

In this study, a simple and efficient way is demonstrated to create strong interfacial interaction between graphene oxide(GO) filler and poly(vinyl alcohol)(PVA) matrix through metal ion coordination. The coordination bonding provides efficient load transfer during the tensile process, and enhances the mechanical properties of the nanocomposites significantly. After being coordinated with Cu(Ⅱ) ions, GO/PVA composites show much higher Young's moduli and yield stresses than pure PVA and noncoordinated GO/PVA. UV–vis and FTIR spectra are performed to confirm the successful coordination between GO and PVA. Ethylene diamine tetraacetic acid disodium salt(EDTA-2 Na) is used to confirm the important role of coordination in enhancing the composites. This research provides a new approach to manufacture polymer-matrix nanocomposites with significantly improved mechanical performances.     

Photo-induced anisotropy in ZnO/PVA nanocomposites prepared by modified electrochemical method in PMA matrix

Substantial photo-induced optical anisotropy was discovered in ZnO/PVA nanocomposites under the influence of external bicolor laser illumination. Zinc oxide nanoparticles were synthesized by electrolysis of a sodium chloride aqueous medium including poly-methacrylic acid (PMA) in a cell system having a soluble zinc anode. The structural analysis of the ZnO powder samples has been carried out by X-Ray Diffractometry (XRD) and Scanning Electron Microscopy (SEM). The polyvinyl alcohol (PVA) embedded ZnO films obtained from the powder samples possess larger grain sizes than those in powder form. The films were prepared from the same polymer matrix but elaborated with two different PVA contents which are respectively 15% and 30%. The photoinduced anisotropy was identified by using two bicolor Er: glass laser beams incident at different angles. Substantial influence of the technological processes on the embedded nanoparticle sizes and related birefringence was explored. The process of laser induced anisotropy shows an occurrence of birefringence saturation.     

Thermal properties stability of UV irradiated PVA nanohybrid composites

Zn‐Al‐salicylic nanohybrid layers have been prepared and used as fillers for polyvinyl alcohol (PVA). Nanohybrid layers of a broad absorption area in UV region were completely and uniformly dispersed in a continuous polymer matrix. PVA and PVA nanohybrid composite (NHC) films were exposed to UV irradiation. Thermal properties (diffusivity, effusivity, and conductivity) of both have been measured through photoacoustic technique before and after UV irradiation. Thermal parameters of PVA suffered from a quick deterioration with UV exposure due to reduction of the phonon mean free path as a result of molecular chain scissions. However, significant stability in such parameters of NHC has been obtained under the influence of UV irradiation. This thermal properties stability may be an important step on the way of obtaining photostable polymer NHC. Copyright © 2012 John Wiley & Sons, Ltd.