Single-atom Fe Embedded Co3S4 for Efficient Electrocatalytic Oxygen Evolution Reaction

Constructing atomically dispersed active sites with densely exposed and dispersed double metal-S_x catalytic sites for favorable OER catalytic activity remains rare and challenging. Herein, we design and construct a Fe₁S_x@Co₃S₄ electrocatalyst with Fe single atoms epitaxially confined in Co₃S₄ nanosheets for catalyzing the sluggish alkaline oxygen evolution reaction(OER). Consequently, in ultralow concentration alkaline solutions(0.1 mol/L KOH), such a catalyst is highly active and robust for OER with low overpotentials of 300 and 333 mV at current densities of 10 and 30 mA/cm², respectively, accompanying long-term stability without significant degradation even for 350 h. In addition, Fe₁S_x@Co₃S₄ shows a turnover frequency(TOF) value of 0.18 s⁻¹, nearly three times that of Co₃S₄(0.07 s⁻¹), suggesting the higher atomic utilization of Fe single atoms. Mössbauer and in-situ Raman spectra confirm that the OER activity of Fe₁S_x@Co₃S₄ origins from a thin catalytic layer of Co(Fe)OOH that interacts with trace-level Fe species in the electrolyte, creating dynamically stable active sites. Combined with experimental characterizations, it suggests that the most active S-coordinated dual-metal site configurations are 2S-bridged (Fe-Co)S₄, in which Co-S and Fe-S moieties are shared with two S atoms, which can strongly regulate the adsorption energy of reaction intermediates, accelerating the OER reaction kinetics.     

A review of recent advances in catalytic combustion of VOCs on perovskite-type catalysts

Along with the rapid development of industry, VOCs gradually move into the spotlight, and now become a kind of harmful environmental pollutants that cannot be overlooked. This paper introduces the hazards of VOCs and the common catalytic combustion catalysts, noble metal catalysts and non-noble metal catalysts, for the elimination of VOCs. Perovskite catalysts, as one of the non-noble catalysts, play an important role in the field of catalytic combustion in recent years. According to the classification of elements doping in perovskites, the research achievements in the past five years were analyzed and reviewed. In addition, this paper also analyzes and elaborates the reaction kinetics and QSAR/QSPR models for the introduction of structural properties and reaction mechanisms.     

基于CARS技术的超燃冲压发动机点火过程温度测量

相干anti-Stokes Raman散射（coherent anti-Stokes Raman scattering，CARS）技术作为一种非接触测量手段，已广泛应用于多种发动机模型燃烧室温度测量及地面试验.然而，目前的工作主要集中在稳态燃烧场温度的测量，缺乏用高分辨率的单脉冲来测量瞬变的燃烧火焰温度及组分浓度的研究.基于CARS理论，结合多参数拟合算法，开发了基于MATLAB的CARS光谱计算和拟合程序CARSCF；利用McKenna平面火焰炉在不同工况下进行了温度测量，并与DLR测量结果进行对比，结果显示开发的CARSCF具有较高的测量重复性和准确性；最后将CARS技术应用于测量超燃冲压发动机点火过程中的温度测量，获取了点火过程中的温度.结果显示，在来流Mach数为3的条件下，H₂/air点火过程中温度呈现急剧上升然后缓慢下降，而CARS信号则呈现急剧上升然后急剧下降随后又缓慢上升的趋势，并且在点火过程中最高温度为1 511 K.      

丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

燃烧轻气炮多级渐扩型燃烧室流场特性数值研究

为了分析多级渐扩型燃烧室结构对燃烧轻气炮氢氧燃烧特性的影响, 通过计算流体力学方法, 分别对采用传统圆柱型燃烧室和多级渐扩型燃烧室的燃烧轻气炮氢氧燃烧发射过程进行数值模拟。对比结果表明, 多级渐扩型燃烧室结构能够明显地减小燃烧室压力波动幅度, 提高氢氧燃烧稳定性; 多级渐扩型燃烧室内形成回流区, 可以减小气流轴向运动速度; 火焰扩展形态与渐扩型结构相吻合, 燃烧反应区表面变化平稳; 多级渐扩型燃烧室结构对氢氧火焰传播过程和压力波动现象有着重要影响。     

K促进的纳米片状水滑石衍生CoAlO金属氧化物催化碳烟燃烧

采用水热法合成了负载K的纳米片状水滑石衍生CoAlO金属氧化物，其表现出优异的催化碳烟燃烧活性.氢气-程序升温还原（H₂-TPR）实验结果表明，K与Co之间的相互作用提高了催化剂的氧化还原性能.X射线光电子能谱（XPS）分析结果表明，K的负载增大了表面Co²⁺/Co³⁺的比例，促进了氧空位的产生，提高了催化剂对气相氧的吸附能力.碳烟-程序升温还原（Soot-TPR）实验结果表明，K的负载增加了表面吸附氧数量.动力学实验结果表明，K的负载增加了单位质量催化剂上的活性氧数量、反应速率和转化频率（TOF），从而提高了催化剂的本征活性.另外，碳烟颗粒可以分散在纳米片的层间，与活性位点的接触效率得到提高，也有利于提高催化碳烟燃烧活性.     

WO_3(001)表面活性氧物种的理论研究

采用第一性原理结合周期性平板模型的方法,对O_2在完整和缺陷WO_3(001)表面的吸附行为进行了研究.结果表明:WO_3(001)完整表面上吸附态的O_2不易成为表面氧化反应的活性氧物种,当吸附质与表面作用时,将优先与表面晶格氧(O_t)成键,进而形成表面缺陷态,体系呈现金属性,电导率增大.比较O_2在缺陷表面上各吸附构型的吸附能发现,O_2的吸附倾向于发生在缺陷位置(W_v)上,且表现为氧气分子中的两个氧原子均与缺陷位W_v作用,形成新的活性氧物种(O_2~-);吸附后表面被氧化,电导率降低.     

Key Factors for Simultaneous Improvements of Performance and Durability of Core‐Shell Pt3Ni/Carbon Electrocatalysts Toward Superior Polymer Electrolyte Fuel Cell

It remains a big challenge to remarkably improve both oxygen reduction reaction (ORR) activity and long‐term durability of Pt?M bimetal electrocatalysts simultaneously in the harsh cathode environment toward widespread commercialization of polymer electrolyte fuel cells (PEFC). In this account we found double‐promotional effects of carbon micro coil (CMC) support on ORR performance and durability of octahedral Pt₃Ni nanoparticles (Oh Pt₃Ni/CMC). The Oh Pt₃Ni/CMC displayed remarkable improvements of mass activity (MA; 13.6 and 34.1 times) and surface specific activity (SA; 31.3 and 37.0 times) compared to those of benchmark Pt/C (TEC10E20E) and Pt/C (TEC10E50E‐HT), respectively. Notably, the Oh Pt₃Ni/CMC revealed a negligible MA loss after 50,000 triangular‐wave 1.0–1.5 V_RHE (startup/shutdown) load cycles, contrasted to MA losses of 40 % (TEC10E20E) and 21.5 % (TEC10E50E‐HT) by only 10,000 load cycles. It was also found that the SA increased exponentially with the decrease in the CO stripping peak potential in a series of Pt?M/carbon (M: Ni and Co), which predicts a maximum SA at the curve asymptote. Key factors for simultaneous improvements of performance and durability of core‐shell Pt₃Ni/carbon electrocatalysts toward superior PEFC is also discussed.     

Effective synthesis of novel O-acetylated compounds over ZrO2-Al2O3 solid acid

The solid acids such as ZrO₂, Al₂O₃ and ZrO₂-Al₂O₃ containing different ZrO₂ loadings (10–80 mol%) were prepared by solution combustion method (SCM) and characterized for their total surface acidity by NH₃-TPD/n-butylamine back titration method and crystallinity by powder X-ray diffraction (PXRD) technique. These solid acids were evaluated for their catalytic activity in the synthesis of novel O-acetylated products from substituted phenols, pyridine alcohols and aryl alcohols with acetic anhydride (AA) as an acetylating agent. The reaction conditions were optimized by varying the catalyst, molar ratio of the reactants, reaction temperature and amount of the catalyst. All the solid acids used in this study exhibited good catalytic activity in the reaction. In particular, ZrO₂-Al₂O₃ containing 80 mol% of ZrO₂ was found to be highly active in the acetylation reaction with high yield of acetylated products. Triangular correlation between the surface acidity, crystallinity and catalytic activity of solid acids was observed. These solid acids were found to be reactivable and reusable.