Blue electroluminescent materials based on indeno[1,2-a]arene derivatives for Organic Light-Emitting Diodes

Abstract

In this study, as a continuous effort for searching efficient blue-emitting materials, we designed and synthesized materials based on indeno[1,2-a]arene. OLED devices using these materials were fabricated in the following sequence; ITO (180?nm)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (50?nm)/emitting materials (30?nm)/4,7-diphenyl-1,10-phenanthroline (Bphen) (30?nm)/Liq/Al (2/100?nm). Particularly, a device using 7,7-dimethyl-7H-indeno[1,2-a]pyrene as emitter showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 1.10?cd/A, 0.49?lm/W, 1.47% at 20?mA/cm², respectively with CIE (x,y) coordinates of (0.15, 0.08) at 6.0V.     

Synthesis of nonplanar bipyridyls bridged by disilane and disiloxane and their phosphorescent copper complexes

Disilane- and disiloxane-bridged bipyridyls ( DSBPy and DSOBPy ) were prepared and their optical properties were investigated in comparison with those of previously reported monosilane- and monogermane-bridged counterparts. The UV–visible absorption and photoluminescence bands of DSBPy and DSOBPy were blue-shifted as a result of elongation of the bridging units from monosilane and monogermane to disilane and disiloxane, likely due to the enhanced twisting of the bipyridyl units. Phosphorescent complexes DSBPy–Cu and DSOBPy–Cu were prepared by the interaction of DSBPy and DSOBPy with Cu₂I₂(PPh₃)₂. X-ray diffraction studies of their single-crystal structures revealed polymeric structures composed of repeat units of DSBPy or DSOBPy and [Cu^II(PPh₃)]₂. Organic light-emitting diodes with the ITO/PEDOT:PSS/ DSBPy–Cu or DSOBPy–Cu :PCTSQ/TAZ/Al structure were fabricated to examine the applications of the complexes as electroluminescent materials. The devices emitted yellow light with emission maxima at approximately 600 nm, and maximal luminance reached 120 and 190 cd m⁻² for devices based on DSBPy–Cu and DSOBPy–Cu , respectively. The performance of the DSOBPy–Cu -based device was improved by using TAZ as the dopant of the emissive layer, and luminance was increased to 390 cd m⁻².     

Phosphorescent κ3-(N^C^C)-Gold(III) Complexes: Synthesis,Photophysics, Computational Studies and Application to Solution-Processable OLEDs

Efficient OLED devices have been fabricated using organometallic complexes of platinum group metals. Still, the high material cost and low stability represent central challenges for their application in commercial display technologies. Based on its innate stability, gold(III) complexes are emerging as promising candidates for high-performance OLEDs. Here, a series of alkynyl-, N-heterocyclic carbene (NHC)- and aryl-gold(III) complexes stabilized by a κ³-(N^C^C) template have been prepared and their photophysical properties have been characterized in detail. These compounds exhibit good photoluminescence quantum efficiency (η_PL) of up to 33 %. The PL emission can be tuned from sky-blue to yellowish green colors by variations on both the ancillary ligands as well as on the pincer template. Further, solution-processable OLED devices based on some of these complexes display remarkable emissive properties (η_CE 46.6 cd.A⁻¹ and η_ext 14.0 %), thus showcasing the potential of these motifs for the low-cost fabrication of display and illumination technologies.     

Ultra-high Tg and ultra-low coefficient of thermal expansion polyimide films based on hydrogen bond interaction

To tolerate high processing temperature during the fabrication of low-temperature polycrystalline silicon thin-film transistors (LTPS–TFT) in flexible OLED devices, the polyimide (PI) films, which are used as substrate, should have ultra-high glass transition temperature (T_g > 450°C) and ultra-low coefficient of thermal expansion (CTE at 0–5 ppm K⁻¹). In this paper, two novel heterocyclic monomers, namely, N,N'-(xanthone-2,7-diyl)bis(4-aminobenzamide) (p-DAXBA) and N,N'-(xanthone-2,7-diyl)bis(3-aminobenzamide) (m-DAXBA), which contain a xanthone moiety, are prepared and polycondensed with pyromellitic dianhydride (PMDA), respectively. PI films (PIa and PIb) with intrinsic high T_g and low CTE are designed from the perspective of rigid conjugate xanthone structure and hydrogen bonding interaction. It is found that the PIa films prepared by p-DAXBA have better linear structure of molecular chains and show relatively higher T_g and lower CTE. The T_g of PIa-40 is greater than 450°C, and CTE can reach as low as 2.7 ppm K⁻¹, tensile strength of 179 MPa, modulus of 5.67 GPa, indicating potential application prospect as a flexible OLED substrate.     

Regulation of Multiple Resonance Delayed Fluorescence via Through-Space Charge Transfer Excited State towards High-Efficiency and Stable Narrowband Electroluminescence

B- and N-embedded multiple resonance (MR) type thermally activated delayed fluorescence (TADF) emitters usually suffer from slow reverse intersystem crossing (RISC) process and aggregation-caused emission quenching. Here, we report the design of a sandwich structure by placing the B−N MR core between two electron-donating moieties, inducing through-space charge transfer (TSCT) states. The proper adjusting of the energy levels brings about a 10-fold higher RISC rate in comparison with the parent B−N molecule. In the meantime, a high photoluminescence quantum yield of 91 % and a good color purity were maintained. Organic light-emitting diodes based on the new MR emitter achieved a maximum external quantum efficiency of 31.7 % and small roll-offs at high brightness. High device efficiencies were also obtained for a wide range of doping concentrations of up to 20 wt % thanks to the steric shielding of the B−N core. A good operational stability with LT₉₅ of 85.2 h has also been revealed. The dual steric and electronic effects resulting from the introduction of a TSCT state offer an effective molecular design to address the critical challenges of MR-TADF emitters.     

A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.     

Novel liquid crystalline organic semiconducting oligomers incorporating N-heterocyclic carbazole moieties for fluorescent OLEDs

A novel class of nematic liquid crystalline organic semiconducting oligomers incorporating N-heterocyclic carbazole moieties has been synthesised using simple and highly efficient reaction pathways. The electroluminescent colour of these novel oligomers can be varied in a controlled manner by molecular design. The values of the ionisation potential and the electron affinity of these electroluminescent oligomers can also be matched by structural design to the Highest Occupied Molecular Orbital (HOMO) energy level of the electron-blocking layer and the Lowest Unoccupied Molecular Orbital (LUMO) energy level of electron-transporting layer in the Organic light emitting diodes to create low charge-injection barriers for electrons and holes, respectively leading to electroluminescence with an efficacy up to 4.1 cd A^?1.     

Synthesis and properties of a thiophene-substituted diaza[7]helicene for application as a blue emitter in organic light-emitting diodes

Carbazole-based diaza[7]helicene substituted by thiophene groups, 2,12-dithiophene-5,15-dihexyl-5,15-diaza[7]helicene (6), was synthesised successfully and confirmed by ¹H NMR, ¹³C NMR, High Resolution Mass Spectrometry, Time of Flight Mass Spectrometry. Compound 6 exhibited good solubility and excellent thermal stability with no melting point and a high decomposition temperature of 453.64 °C. A doped device with a structure of ITO/NPB (50 nm)/CBP: 10% 6 (30 nm)/Bphen (20 nm)/Mg:Ag (150 nm)/Ag (50 nm) emitted the blue light at 460 nm with Commission Internationale de LEclairage (CIE) coordinate of (0.176, 0.26). The maximum brightness and external quantum efficiency (EQE) were 2306 cd m^?2 and 0.41%, respectively.     

高效大面积有机白光照明研究及其展望

白光有机发光二极管(OLED)是新一代健康节能照明光源,光效性能已超过荧光灯水平。自从OLED技术问世以来,研究人员陆续开展了关于OLED照明的研究工作。本文介绍了OLED照明的特点,以及国内外OLED照明发展现状,讨论了发展OLED照明技术和装备国产化所亟待解决的重大难题和面临的挑战,重点论述了发展高效大面积OLED照明器件制备技术及推动OLED照明产业化的重要意义。