Facile Synthesis of Mg2+‐Doped Carbon Dots as Novel Biomaterial Inducing Cell Osteoblastic Differentiation

Carbon dots (CDs), as an emerging fluorescent nanomaterial with low toxicity, has been widely applied in various bio‐related fields. However, investigations on their capabilities in guiding osteogenic differentiation are rarely seen, which has great significance in osteoporosis therapy and bone regeneration. Herein, for the first time, a new kind of Mg²⁺‐doped CDs is facilely synthesized through a one‐step hydrothermal method from metal gluconate salts. The CDs can serve as nanocarrier of Mg²⁺ ions entering into cells, and the bioessential metal ions subsequently stimulate osteoblastic differentiation by improving alkaline phosphatase (ALP) activity and upregulation related mRNA expression. Noteworthy, the raw material has almost negligible performance on osteoblastic differentiation compared to Mg‐CDs, which is due to the ultrasmall sizes of CDs and the efficient uptake by cells. Moreover, benefitting from the fluorescence properties, Mg‐CDs can also be applied as cell labeling agents. This work proposes a new strategy to synthesize multifunctional metal ion‐doped CDs, which might had great potential in serving as promising nanodrugs for bone loss therapy.     

电感耦合等离子体原子发射光谱(ICP-AES)法测定高纯铝中Fe、Cu、Mg、Zn、Ti

建立了用电感耦合等离子体原子发射光谱(ICP-AES)法测定高纯铝中Fe、Cu、Mg、Zn、Ti的方法。详细讨论了基体元素和共存元素对分析元素的光谱干扰,以及盐酸用量的影响;选择了合适的分析谱线,同时得出了各元素的检出限。证明用基体匹配的方法在Fe 259.940nm、Cu 327.396nm、Mg279.079nm、Zn 213.856nm、Ti 334.941nm处可准确、可靠地测定高纯铝中含量范围在0.001%~0.01%的Fe、Cu、Mg、Zn、Ti元素。     

ANiN(A = Li,Na, Mg,Ca)的结构、热力学、弹性和电子性质的第一性原理研究

三元过渡金属氮化物ANiN (A = Li, Na, Mg, Ca)是潜在的可充放电池的电极材料。物理性质,比如热稳定性、电子能隙以及弹性稳定性等,对于这些材料的电池应用都是非常重要的。本文使用第一原理方法,对比研究了ANiN这些材料的结构、动力学、弹性和电子结构性质。对状态方程和声子谱的计算被用来确定体系的稳定结构。对最稳定结构的弹性常数的计算表明,这些稳定结构都满足 Born-Huang的稳定性判据,意味着它们的弹性稳定性。对体系电子结构的计算表明,LiNiN和CaNiN是半金属（half-metals）,MgNiN是磁性材料,而NaNiN是通常的金属。这些材料的磁学性质都通过Stoner理论进行了解释。最后,电荷密度的计算被用来很好地说明了这些材料中的Ni-N成键的特征,表明成键特点主要是离子性的,但明显地混合了共价性。     

基体分离-电感耦合等离子体原子发射光谱法 测定精铋中10种杂质元素

试验采用电感耦合等离子体发射光谱法测定精铋中Cd、Co、Cu、Fe、Mg、Mn、Ni、Pb、Ti、Zn十种杂质元素,样品用优级纯硝酸溶解,往60℃左右的溶液中,滴加氨水(1+1),控制pH值在3.0~4.0。考察了温度、酸度、沉降时间对铋的去除率和对检测结果的影响。根据分析线的选择原则,结合待测元素的检测范围,选择无干扰、峰形对称、灵敏度适中的谱线作为分析线Cd 228.802nm、Co 237.862nm、Cu 324.754nm、Fe 259.940nm、Mg 279.553nm、Mn 257.610nm、Ni 231.604nm、Pb 182.205nm、Ti 323.452nm、Zn 213.856nm。各元素的质量浓度在一定范围内与其发射强度呈线性,校准曲线的线性相关系数均大于0.9997,方法中各元素检出限为0.002μg/g~0.253μg/g。?按照实验方法测定精铋实际样品,结果的相对标准偏差(RSD,n=9)为2.5%~9.8%,加标回收率为95.0%~102.2%,满足检测要求。     

二价与四价金属离子等摩尔共掺杂的锂离子电池正极材料LiMn1.9Mg0.05Ti0.05O4的制备与表征

以氢氧化锂、乙酸锰、硝酸镁和钛酸丁酯为原料, 以柠檬酸为螯合剂, 采用溶胶-凝胶法制备了二价镁离子与四价钛离子等摩尔共掺杂的尖晶石型锂离子电池正极材料LiMn_1.9Mg_0.05Ti_0.05O₄. 采用热重分析(TGA), X射线衍射(XRD), 扫描电子显微镜(SEM), 透射电子显微镜(TEM)和电化学性能测试(包括循环伏安(CV)和电化学交流阻抗谱(EIS)测试)对所得样品的结构、形貌及电化学性能进行了表征. 结果表明: 780℃下煅烧12 h 得到了颗粒均匀细小的尖晶石型结构的LiMn_1.9Mg_0.05Ti_0.05O₄材料, 该材料具有良好的电化学性能, 在室温下以0.5C倍率充放电, 在4.35-3.30 V电位范围内放电比容量达到126.8 mAh·g^-1, 循环50 次后放电比容量仍为118.5mAh·g^-1, 容量保持率为93.5%. 在55℃高温下循环30次后的放电比容量为111.9 mAh·g^-1, 容量保持率达到91.9%, 远远高于未掺杂的LiMn₂O₄的容量保存率. 二价镁离子与四价钛离子等摩尔共掺杂LiMn₂O₄, 改善了尖晶石锰酸锂的电子导电和离子导电性能, 使其倍率性能和高温性能都得到了明显的提高.     

（Ca,Mg）—Sialon陶瓷在空气及水润滑条件下的磨损机理研究

利用ＳＲＶ球－盘磨损试验机考察了一种（Ｃａ，Ｍｇ）－Ｓｉａｌｏｎ陶瓷在空气及水中的摩擦学性能，并采用ＥＰＭＡ，ＳＥＭ，ＥＤＡＸ以及ＸＰＳ等分析手段对其磨损机理做了进一步研究。结果表明：（Ｃａ，Ｍｇ）－Ｓｉａｌｏｎ陶瓷在水中比在空气中具有更低的摩擦因数，但具有较高的磨损体积损失。     

Application of multi-buffer layer of (Zn,Mg)O/CdS in Cu2ZnSn(S,Se)4 solar cells

(Zn,Mg)O (ZMO) buffer layer has attracted attention for having the potential to control the conduction band offset of buffer layer and large band-gap (Eg) Cu₂ZnSn(S,Se)₄ (CZTSSe) absorber interface, where the ZMO layer is deposited by the sputtering. However, the solar cell efficiency is decreased with the ZMO layer as compared with the CdS layer. The decrease in conversion efficiency is attributed to the sputtering damage on the absorber and high light reflection from the surfaces of CZTSSe solar cells. To completely suppress the damage, a CdS layer with very thin thickness of 20 nm is inserted between the ZMO layer and the CZTSSe layer. In addition, MgF₂ layers are deposited on CZTSSe solar cells as anti-reflection coating. Ultimately, the solar cell with multi-buffer layer of ZMO/thin-CdS is almost same level as that with the CdS layer. Therefore, the multi-buffer layer can be an appropriate buffer layer of the large-Eg CZTSSe layer.     

Structural,optical and photocatalytic properties of (Mg,Al)-codoped ZnO powders prepared by sol–gel method

Structural and optical properties of 1 at % Al-doped Zn_1−xMg_xO (x=0–8%) powders prepared by sol–gel method were systematically investigated by means of X-ray diffraction, scanning electron microscopy, ultraviolet–visible absorbance measurement, photoluminescence and Raman scattering spectra. All the powders retained the hexagonal wurtzite structure of ZnO. The band gap and near band emission energies determined from absorbance and photoluminescence spectra increased linearly with increasing Mg content, respectively, which implied that the Mg worked effectively on ZnO band gap engineering, irrespective of Al codoping. However, according to the PL and Raman scattering studies, for the sample of x=8%, the Al doping efficiency was decreased by higher Mg codoping. On the other hand, the effect of Mg codoping on photocatalytic degradation of methylene orange was explored experimentally. The substitution of Mg ions at Zn sites shifted the conduction band toward higher energies and then enhanced the photocatalytic activity, while the incorporation of interstitial Mg ions and decreased Al doping efficiency for higher Mg doping sample (x=8%) reduced the photocatalytic activity.     

钙铝镁合金阴极对WOLED器件性能的影响

采用Ca/Al/Mg合金作为器件的阴极,基于红绿/蓝双发光层制作了6种白色磷光OLED器件,器件结构为ITO/MoO₃ (30 nm)/NPB (40 nm)/mCP:Firpic (8%,40 nm)/CBP:R-4B (2%):Ir(ppy)₃ (14%,5 nm)/TPBi (10 nm)/Alq₃(40 nm)/Ca:Al:Mg (x%,100 nm) (x=0,5,10,15,20,25)。通过改变Mg的掺杂比例,研究了不同比例的Ca/Al/Mg合金阴极对器件性能的影响。结果表明:Mg质量分数为15%的Ca/Al/Mg阴极具有良好的电子注入特性,有效改善了器件的发光特性,最大发光亮度可达1 504 cd/m²,效率达到最大值14.3 cd/A,色坐标接近(0.46, 0.42)。