介孔钯-硼合金纳米颗粒的制备和甲醇氧化电催化性能北大核心CSCD

合金化可以调节贵金属纳米材料的物理化学性质,从而显著提升它们的电催化性能。尽管合金化在过去的20多年里已取得诸多成果,但是如何充分发挥纳米合金的组分优势仍需深入的探究。本研究通过一步溶液相合成法实现了类金属硼(B)合金化的钯基介孔纳米催化剂材料的合成,同时探究了B原子的组分优势和介孔形貌的结构优势在碱性介质中电化学甲醇氧化反应(MOR)的协同作用。最优PdCuB介孔纳米催化剂表现出优异的电化学MOR活性和稳定性。机理研究表明,优异的催化活性源于B原子在Pd基介孔纳米催化剂中的积极协同作用;该协同作用通过电子效应(改变Pd的表面电子结构从而减弱CO基中间体的吸附)和双功能效应(促进OH_(2)的吸附从而氧化CO基中间体)在动力学上加速了有毒CO基中间体的去除(提高甲醇氧化的决速步骤)。同时,B原子的间隙插入和介孔结构抑制了物理奥斯特瓦尔德(Ostwald)熟化过程,显著增加了催化剂的稳定性。     

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Acidity plays a vital role in methane conversion by co-feeding method, which is one of the best strategies to improve the utilization and gentle the reaction conditions of methane. In this work, Zn, Ni, Mo, La, Ga, Fe and Co-impregnated ZSM-5 zeolites have been prepared with the same substitutions to variate the acidities and tested in co-aromatization of methanol with methane. It is demonstrated that the new medium-strong acid sites formed by metal and strong acid sites are the key role to activate methane in co-reaction. Zn-modified ZSM-5 catalyst is preferred to exhibit the best methane conversion of 12%, whose aromatic selectivity increases from 27.2% to 52.2% compared with that of HZSM-5. Besides, the addition of methane further improves the production of high-valued aromatics compared with methanol to aromatics (MTA) reaction.     

Ultrasonication-promoted synthesis of Ni/mayenite for catalytic reforming of biomass tar

Ultrasound-assisted approach was successfully applied for the synthesis of mayenite from calcium and aluminum hydroxides and then subsequently impregnated with Ni by the wet impregnation method. The synthesis was performed with a 13 mm probe-type ultrasound, operating under an acoustic power of 30.5 W and a frequency of 20 kHz. Ultrasound application was studied in detail from a 3^k experimental design, where the variables studied were ultrasound time (10–50 min) and calcination temperature (900–1200 °C). Ultrasound promoted an effective dispersion of the precursors in a short time of 10 min leading to a high conversion to mayenite after calcination at 1200 °C. Ultrasound treatment also had a positive effect on Ni impregnation, increasing the dispersion of the metal in the support and leading to a stronger interaction of nickel-containing species with mayenite support. The use of ultrasound application has proved to be attractive both for catalyst properties and for facilitating catalyst synthesis.     

Facile generation of α,α-dibromodimethyl ketals from alkynes using TsNBr2

TsNBr₂ reacts with alkyne in the presence of methanol to form α,α-dibromodimethyl ketals instantaneously. The reaction proceeds smoothly at room temperature without using any other catalyst. The one step reaction can be carried out with both aromatic and aliphatic alkynes in excellent yield.     

In situ infrared study of formate reactivity on water–gas shift and methanol synthesis catalysts

In order to investigate the methanol synthesis reaction from CO₂/H₂, a comparative study of the reactivity of formate species on different types of catalysts and catalyst supports has been carried out. Formic acid was adsorbed on water–gas shift catalysts, Cu/ZnO/Al₂O₃ methanol synthesis catalyst and ZnO/Al₂O₃ support, Cu/ZnO/ZrO₂ and Cu/ZnO/CeO₂ methanol synthesis catalysts as well as their corresponding supports ZnO/ZrO₂ and ZnO/CeO₂. Superior reactivity and selectivity of dedicated methanol synthesis catalysts was evidenced by their behavior during the subsequent heating ramp, when these samples showed the simultaneous presence of formates and methoxy species and a higher stability of these reaction intermediates in the usual temperature range for the methanol synthesis reaction.     

Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methane

Dry reforming of methane has been carried out on SBA-15 catalysts containing 5 wt% Ni and 6 wt% Ce. The effect of the order of Ni and Ce impregnation on the catalytic activity has been studied. Both metals were added using the “two-solvent” method that favors metal dispersion inside the pores. Characterizations by XRD (low and high angles), N₂ sorption, SEM and TEM of the materials after metal addition and calcination indicate good preservation of the porosities and high NiO and CeO₂ dispersion inside the porous channels. Reduction was carried out before the catalytic tests and followed by TPR measurements. The most active reduced catalyst was the Ni–Ce/SBA-15 sample prepared by impregnating cerium first, then nickel. All catalysts were highly active and selective towards H₂ and CO at atmospheric pressure. Full CH₄ conversion was obtained below 650 °C. The higher performances compared to those reported in the literature for mesoporous silica with supported Ni and Ce catalysts are discussed.     

Modeling of biomass-based hydrogen production via catalytic sorption-enhanced reformer integrated with a gasifier

The sorption enhanced reformer concept breaks the thermodynamic limits of steam methane reforming and water-gas shift reactions with selective CO₂ removal to produce more H₂. In this paper, we propose a dynamic kinetic model for sorption-enhanced steam reformers (SERs) integrated with biomass gasifiers. An analysis of operating conditions was conducted to examine high purity hydrogen production. The kinetic model was validated with published literature results at different reactor pressures (5-20 bar), steam/carbon ratios (2-5), and reactor temperatures (673K–1023K). This study shows that biomass gasifiers can be integrated with SER reactors to produce high purity H₂.     

“功能涂料”课程的教学改革:打造趣味性、互动性和挑战性的课堂*

本着培养涂料行业精英人才的宗旨,针对涂料行业对人才需求的特点,结合多年教学经验,从教材的选择、教学内容设置、教学方法改进以及考核方法改革等4个方面探索了“功能涂料”课程的教学方法改革与课程实践。通过自编教材,精心设置授课内容,将科研成果、前沿知识、生活场景、新闻事件与书本知识相结合,提高课堂的趣味性;通过讨论法和交换式互动上课来加强课堂的互动性;通过过程性评价提高课程的学业挑战度。通过教学改革,本课程的选课率和出勤率得到了大幅提高,学生对涂料的兴趣明显增加,毕业后选择进入涂料领域工作的学生也越来越多。     

ZSM-5分子筛酸位分布及其甲醇制烯烃催化性能的定向管理与调控

ZSM-5分子筛在甲醇制烯烃(MTO)过程中的催化性能和反应机理与其孔道中酸位点分布位置紧密相关. 本文证明在水热合成过程中加入适量的钠离子(Na⁺)可以增加ZSM-5分子筛交叉腔酸位点比例; 从而促进高级甲基苯的生成并加速芳烃循环, 有利于乙烯生成. 相反, 在合成过程中不添加钠离子, 所制备的ZSM-5分子筛直孔道和正弦孔道酸位点比例明显提高, 有利于促进烯烃循环并提高丙烯和C₃₊烯烃选择性.     

Size-controllable carbon spheres doped Ni (II) for enhancing the catalytic oxidation of methanol

Ni(II)/CSs were prepared using a simple two-step hydrothermal method. The morphology and composition of the catalysts were studied with scanning electron microscope, transmission electron microscope, and X-ray diffraction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy showed that the surface of the prepared carbon spheres was rich in hydroxyl groups, which was beneficial to remove CO intermediates, and therefore, improving the catalytic efficiency and the antipoisoning ability of the catalysts. The results of cyclic voltammetry and chronoamperometry showed that the electrocatalytic activity and stability of Ni(II)/CSs were higher than that of unloaded NiAc under alkaline environment. When the nickel content was 5 wt.%, the peak oxidation current density of methanol on Ni(II)/CSs electrocatalyst reached the maximum of 34.54 mA/cm², which was about 1.8 times that of unloaded NiAc. These results indicate that Ni(II)/CSs has potential applications in the electrocatalytic oxidation of methanol.