The effect of crystallization behavior on high conductivity,enhanced mechanism and thermal stability of poly(ε-caprolactone)/multi-walled carbon nanotube composites

Poly(ε-caprolactone) (PCL) composites filled by multi-walled carbon nanotubes (MWCNTs) which was non-covalently modified by the combined surfactants of poly(sodium 4-styrenesulfonate) and cetyltrimethyl-ammonium bromide (PSS-CTAB) were fabricated via simple solution precipitation method. PCL/MWCNTs composites provided with the low procolation threshold (0.4?wt%) and high electrical conductivity due to good dispersion of MWCNTs. And the excellent mechanical properties and enhanced thermal stability were also obtained with the addition of modified MWCNTs. In addition, all PCL composites showed significantly enhanced crystallization with increasing the MWCNTs contents, which demonstrated that the MWCNT-induced crystallization of PCL could effectively regulate the properties of composites. In a word, introducing non-covalent functionalized MWCNTs in the polymer system was a promising way for developing excellent conductive composites.     

Multi-walled carbon nanotubes modified with iron oxide and silver nanoparticles (MWCNT-Fe3O4/Ag) as a novel adsorbent for determining PAEs in carbonated soft drinks using magnetic SPE-GC/MS method

The synthesis of compounds with an excellent adsorption capability plays an essential role to remove contaminants such as phthalic acid esters (PAEs) with potential carcinogenic characteristics from different food products. In this context, for the first time, a novel adsorbent (MWCNT-Fe₃O₄/Ag) was synthesized by using iron (magnetic agent), and silver (catalytic and surface enhancer agent) to further approach in a magnetic SPE-GC/MS method for determining of PAEs in carbonated soft drink samples. The limit of detection (LOD) and limit of quantification (LOQ) values of MSPE-GC/MS were determined in six PAEs as a range of 10.8–22.5 and 36–75 ng/L, respectively. Also, the calibration curves of PAEs were linear (R₂ = 0.9981–0.9995) over the concentration level of 10.000 ng/L and the recoveries of the six PAEs were ranging from 96.60% to 109.22% with the RSDs less than 8%. Moreover, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and transmission electron microscopy analyses (TEM) were utilized to characterize the produced MWCNT-Fe₃O₄/Ag. Based on the findings, the surface of MWCNT is relatively uniform, which became coarser after loading with Fe₃O₄/Ag particles. Also, EDX spectrum showed the carbon (C), iron (Fe), oxygen (O), Ag and copper (Cu) are the main components of synthesized MWCNTs-Fe₃O₄/Ag. The successful adhesion of Fe₃O₄/Ag on the texture of MWCNTs using a co-precipitation method was confirmed by XRD and FT-IR assays. Additionally, excellent crystallinity and clear lattice nanocrystals fringes of prepared MWCNT-Fe₃O₄/Ag was demonstrated by TEM analysis. Based on the obtained VSM images, the prepared sorbent (MWCNT-Fe₃O₄/Ag) has the good magnetic performance for magnetic separation and extraction processes. It was concluded that the synthesized MWCNT-Fe₃O₄/Ag could be used as an efficient adsorbent for determining contaminants such as PAEs in different beverage samples.     

High effects of smoke suppression and char formation of Ni?Mo/Mg(OH)2 for polypropylene

The Ni? Mo/Mg(OH)₂ (NMM) hybrid as an efficient flame retardancy and smoke suppression composite for polypropylene (PP) was synthesized through Ni? Mo co‐precipitation on the surface of Mg(OH)₂ (MH) hexagonal nanosheets. Compared to PP/MH, PP/NMM exhibited excellent smoke suppressing and flame retardancy on the heat release rate, total heat release, smoke production rate, total smoke production, CO production rate and total CO production with the same loading. The reduced hazard of PP/NMM was mainly attributed to the high physical barrier effect of compact char residues on heat, smoke and combustible gas. The mechanism study indicated that multiwalled carbon nanotubes (MWCNTs) generated from the catalytic carbonization of PP by the Ni? Mo compound could play the role of “rebar” to strengthen the char residues, avoid the generation of cracks and form highly compact char layer. Furthermore, MgO could facilitate the production of MWCNTs through changing the pyrolysis process of PP and increasing the reaction time between pyrolysis gas and Ni? Mo compound. Hence, the new Ni? Mo/MH catalyst hybrid may explore the potential for solving the tough problem of the flammability and heavy smoke of the polyolefins system.     

Synergistic effect of thermoplastic phenolic resin and multiwalled carbon nanotubes on the crystallization of polyoxymethylene

To reduce the crystallization rate of polyoxymethylene (POM) to meet the requirement of thick-walled and large-sized articles production, and maintain high crystallinity as well as obtain refined crystalline grains to ensure the strength and stiffness simultaneously, thermoplastic phenolic resin (PF) and multiwalled carbon nanotubes (MWCNTs) were used as crystal growth inhibitor and nucleating agent, respectively, and their effects on the crystallization of POM were studied in details. The results showed that PF is an effective inhibitor and MWCNTs exhibits excellent nucleation effect on POM. Based on the obtained results, their synergistic influences on the crystallization process of POM were investigated. It is found that the objective of decreasing the crystallization rate while maintaining high crystallinity and forming fine crystalline grains can be realized. The 97/3/1 wt% POM/PF/MWCNTs, compared with those of neat POM, The T _c shifts by 3.3°C to a lower temperature, the crystallization enthalpy increases by 16.1 J/g and the full width at half-maximum widens by 48.5%. The modulation effect of PF and MWCNTs on the crystallization is closely related to the PF content and dispersion, the distribution and dispersion of MWCNTs in the PF and POM phases.     

Insights into MWCNTs/polyimide nanocomposites: from synthesis to application as free-standing flexible electrodes in low-cost micro-supercapacitors

In the pursuit to enlarge the library of polyimide materials for energy applications, new polyimide/MWCNTs composite films have been developed by MWCNTs-assisted polycondensation reaction of a hydroxyl and triphenylmethane-containing diamine with benzophenone tetracarboxylic dianhydride targeting to highlight their electrical storage capability as flexible electrodes in micro-supercapacitors (mSCs). The Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance, UV–vis, fluorescence, and Raman spectroscopies were used to demonstrate the evolution of interfacial interactions between MWCNTs and the precursors (diamine monomer and intermediate polyamidic acid) and polyimide matrix that proved to be the origin of MWCNTs homogeneous dispersion. Thus, composite films incorporating 1, 3, 5, and 10 w.t.% MWCNTs were obtained and thoroughly investigated with regard to their morphology, mechanical behavior, thermal stability, and electrical conductivity. The electrochemical performance of these composites was first analyzed in a classical three-electrode cell by cyclic voltammetry and galvanostatic charge-discharge in both aqueous and organic electrolyte systems. By far, the best electrical storage capacity was obtained with the composite polyimide film containing 10% MWCNTs that was further used as both active material and current collector in a flexible symmetric mSC realized by a straightforward and low-cost procedure. In the attempt to better exploit the advantages of this composite film, it was layered with a graphite-containing paint and tested as an electrode in a flexible mSC, which provided satisfactory results. To our knowledge, this is the first report on the electrical charge storage capability of a polyimide/MWCNTs free-standing film as a flexible electrode in mSCs, which do not require time- and resource-consuming processing steps.     

Synergistic Catalytic Acceleration of MXene/MWCNTs as Decorating Materials for Ultrasensitive Detection of Morphine

Ti₃C₂T_X MXene was synthesized by exfoliating pristine Ti₃AlC₂ phase with hydrofluoric acid. The simple methods of mechanical mixing and drop-casting of Ti₃C₂T_X and MWCNTs were carried out to prepare sensing electrode of Ti₃C₂T_X/MWCNTs/GCE. The composite and topography, especially the surface functional groups of Ti₃C₂T_X/MWCNTs were analyzed by XRD, SEM, FTIR, XPS, and Raman spectrum. The results turned out that Ti₃C₂T_X was characteristic by accordion-like 2D nanostructure with the surfaces terminated with −OH, −F, and =O. When combining with acid pretreated, the interaction between the functional groups of Ti₃C₂T_X and MWCNTs facilitated the convenience and reproducibility of the robust modified electrodes and could make Ti₃C₂T_X/MWCNTs/GCE possess good synergistic catalytic acceleration by increasing the electron transfer efficiency as well as adsorption and aggregation of MOP analyte onto the electrode surface. Versatile electrochemical measurements of CV, DPV and EIS were used to investigate the electrochemical performance of Ti₃C₂T_X/MWCNTs/GCE sensing platform. The linear detection range is 0.01–100 μM with the limit of detection of 0.0092 μM (S/N=3). The sensor has good stability, repeatability, reproducibility and anti-interference. In the detection of serum and urine samples, it has a good recovery rate.     

Preparation of modified multi‐walled carbon nanotubes as a reinforcement for epoxy shape‐memory polymer composites

Effectively improving the mechanical properties and thermal resistance of epoxy shape‐memory polymers (ESMPs) without affecting their shape‐memory performance is necessary to expand these polymers in practical applications. In this article, modified multi‐walled carbon nanotubes (MWCNTs) were prepared and used as efficient reinforcement for enhancing the comprehensive properties of ESMPs. Increases of nearly 289% to 444% for impact strength and 112% to 184% for tensile force were obtained by adding only 0.1 to 1 wt% epoxy‐modified MWCNTs. The addition of unmodified and carboxyl‐modified MWCNTs was also investigated but showed less impact on the mechanical properties of the ESMPs than epoxy‐modified MWCNTs. Thermogravimetry analysis (TGA) and dynamic mechanical analyses (DMA) showed that less than 1 wt% modified MWCNTs can enhance the heat resistance of ESMPs greatly. Although the shape recovery time for composite materials increased upon adding the MWCNTs, the entire recovery time was still less than 1 minute, and the shape recovery rate was relatively high, nearly 100%.     

Novel Potentiometric Solid-contact Electrode for the Determination of Fe2+ Ions via MWCNTs-Gemifloxacin Composite

A novel electrode was fabricated for the quantitation of Fe²⁺ ion. It was based on the covalent attachment of the gemifloxacin molecule (the recognition element) to the surface of MWCNTs to be incorporated as an electroactive material. Linear response of Fe²⁺ ions was found in the concentration range of 1×10⁻² mol L⁻¹ to 1×10⁻⁸ mol L⁻¹ with a Nernstian slope of 30.37 ±0.3 (mV/decade) and attained a stable response within 5 s. The sensor exhibited LOD value of 4.8×10⁻⁹ mol L⁻¹. It was applied in the monitoring of Fe²⁺ concentration in multi-vitamins tablets, tap water and milk samples with acceptable recovery ranged from 94.00 % to 102.00 %.     

Electrochemical Characterization of the Interaction of Multiwalled Carbon Nanotubes with Doxorubicin

It has been suggested that multiwalled carbon nanotubes (MWCNTs) interacting with pharmaceutics may be introduced into the body as nanocarriers. To deliver the anticancer drugs, covalent or noncovalent functionalization of MWCNTs is required. In this study, the influence of oxidation on MWCNTs in the interaction with chemotherapeutic drug, doxorubicin, was characterized. The binding of doxorubicin with MWCNTs decreased rapidly with the increasing oxidation period with sulfuric acid. However, with nitric acid, the interaction increased initially and slowly decreased with time. The best results were obtained for sulfuric and nitric acid following 1 and 3?h of oxidation, respectively. The results show that sulfuric acid provided more favorable interaction for MWCNTs with doxorubicin than nitric acid.     

Synthesis,characterization and heterogeneous catalytic application of a nickel(II) Schiff base complex immobilized on MWCNTs for the Hantzsch four-component condensation

A nickel(II) Schiff base complex immobilized on multi-wall carbon nanotubes (MWCNTs) surface as a highly efficient heterogeneous catalyst was synthesized and characterized by IR, X-ray diffraction patterns, scanning electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma, elemental analysis, and thermal gravimetric analysis. Then a facile and environmentally benign procedure was developed for synthesis of polyhydroquinoline derivatives via Hantzsch one-pot condensation reaction of aromatic aldehydes, 1,3-diones, ethyl acetoacetate, and ammonium acetate in the presence of above synthesized catalyst under solvent-free conditions. This protocol has the advantages of stability, easy availability, recyclability and eco-friendly nature of catalyst, simple experimental and work-up procedure, and also high to excellent yields. Considering the solvent-free condition and also temperature, time, and yield of the model reaction, the nanocatalyst reported here is among the best catalysts reported so far for synthesis of polyhydroquinolines.