多壁碳纳米管/聚丙烯酸/MOF-5的制备及其N_2吸附性能

用化学修饰法制备出复合物多壁碳纳米管/聚丙烯酸(MWCNTs/PAA),用溶剂热法合成Zn4O(1,4-benzenedicarboxylate)3(MOF-5)和MWCNTs/PAA/MOF-5。通过XRD、FTIR、TG、HRTEM和比表面积和孔隙度分析仪对MWCNTs,MOF-5,MWCNTs/PAA和MWCNTs/PAA/MOF-5的结构和性质进行表征。结果表明:复合材料MWCNTs/PAA中PAA包覆在碳纳米管外壁上,含量为4.3%,在FTIR中有PAA特征官能团的吸收峰;MWCNTs/PAA/MOF-5和MOF-5的形貌一样,MWCNTs/PAA/MOF-5的热分解温度比MOF-5的提高了49℃;MOF-5和MWCNTs/PAA/MOF-5的N2吸附曲线为Ⅰ型,77 K和100 k Pa条件下,N2的吸附量达到最大值,分别为265、299.03 cm3·g-1。     

锂参与合成MOF-5用于CO_2/CH_4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(x Li-MOF-5,x=0,1,3,5)。在MOF-5结晶过程中,锂离子被合并入其骨架结构中。实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质。不同的x Li-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变。其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g-1),对40%CO2/60%CH4混合气体具有最优吸附选择性。     

全自动红外吸收光谱法测定硫化矿矿石中全硫量

近年来,随着全自动红外测硫仪的快速发展,仪器性能的升级优化,加之对固体矿物质种类和高硫含量检测技术有了新的技术突破。因此将全自动红外测硫仪应用于硫化矿矿石中全硫量的测定,采用国家硫矿石标准样品中不同段的硫含量(标准值),建立标准工作曲线,再结合实际样品校正该曲线,建立了一种用全自动红外吸收光谱法测定硫化矿矿石中全硫量的检测方法。方法的主要特点是包括样品称量在内的整个测试过程由计算机控制自动完成,自动化程度极高,分析时间短,结果准确、可靠。选取当地不同矿物特性的8个样品,测定的相对标准偏差RSD(n=11)均小于2.5%,样品加标回收率为86.2%~117%,与化学法(空气或氧气燃烧-碘量法)测定结果对照,测定结果都在允许误差范围内,完全能够满足日常硫化矿矿石中全硫含量的检测要求。     

Metal Organic Framework-235 (MOF-235) Modified Carbon Paste Electrode for Catechol Determination in Water

MOF-235 is presented as an orange powder, with crystals of the octahedral formation. It was already used as adsorbent to remove different compounds from water; however, no attempts have been published about the exploration of the MOF-235 application as electrochemical sensor for organic compounds yet. MOF-235 was synthetized and after that, it was characterized by SEM, XRD and FTIR. Graphite electrodes (GEs) were modified with different MOF-235 ratio (5 %, 7 %, 10 %, 12 % and 14 %) and these modified GEs were characterized by cyclic voltammetry (CV) measurements in order to determine the effect of MOF-235 concentration on the current response. Results indicated that, a significant improvement on the current response was attained at MOF-235(10 %)/GE respect to unmodified GE. This behavior is related to the pore structure and multiple active sites on the MOF surface. The performance of the MOF-235(10 %)/GE as electrochemical sensor for detecting catechol was assessed by differential pulse voltammetry (DPV). Catechol detection response of MOF-based sensor provided a detection limit of about 12.79 μmol L⁻¹ with a correlation coefficient (R²) of about 0.9928 ranging from 12 to 514 μmol L⁻¹. Finally, MOF-235(10 %)/GE was used to determine catechol in real water matrixes.     

Controlled Synthesis of Large Single Crystals of Metal-Organic Framework CPO-27-Ni Prepared by a Modulation Approach: In situ Single-Crystal X-ray Diffraction Studies

The size of single crystals of the metal-organic framework CPO-27-Ni was incrementally increased through a series of modulated syntheses. A novel linker modulated synthesis using 2,5-dihydroxyterephthalic acid and the isomeric ligand 4,6-dihydroxyisophthalic acid yielded large single crystals of CPO-27-Ni (∼70 μm). All materials were shown to have high crystallinity and phase purity through powder X-ray diffraction, electron microscopy methods, thermogravimetry, and compositional analysis. For the first time single-crystal structure analyses were carried out on CPO-27-Ni. High BET surface areas and nitric oxide (NO) release efficiencies were recorded for all materials. Large single crystals of CPO-27-Ni showed a prolonged NO release and proved suitable for in situ single-crystal diffraction experiments to follow the NO adsorption. An efficient activation protocol was developed, leading to a dehydrated structure after just 4 h, which subsequently was NO-loaded, leading to a first NO loaded single-crystal structural model of CPO-27-Ni.     

锂参与合成MOF-5用于CO2/CH4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(xLi-MOF-5, x=0, 1, 3, 5).在MOF-5结晶过程中,锂离子被合并入其骨架结构中.实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质.不同的xLi-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变.其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g^-1),对40% CO₂/60% CH₄混合气体具有最优吸附选择性.     

MOF-808/Bi2MoO6复合材料的构筑及其光催化性能

采用简单的两步水热法制备出了锆基金属有机骨架和钼酸铋的复合材料MOF-808/Bi₂MoO₆。通过X射线粉末衍射、傅里叶红外光谱、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、紫外可见漫反射光谱、N₂吸附-脱附测试和电化学测试对所制备材料的组成、微观结构、光学性质以及光生载流子的复合效率进行了分析。与纯Bi₂MoO₆和MOF-808相比,0.5%-MOF-808/Bi₂MoO₆复合材料展示出了较高的光催化活性,在可见光照射120 min时对抗生素环丙沙星(CIP)的降解率达89.7%。通过自由基捕获实验,证明了·O₂^-是主要活性物种,基于此我们提出了可能的光催化降解机理。     

Observation of ZnO nanoparticles outside pores of nano Zn4O(C8H4O4)3 metal-organic framework

It was recognized that ZnO can be formed during synthesizing nano Zn₄O(C₈H₄O₄)₃ metal-organic framework (nano MOF-5). Furthermore, it is generally accepted that the ZnO is dispersed inside the pores of MOF-5. However, herein, the measurements of X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) showed that the crystal particle sizes of ZnO in MOF-5 are in the range of 5-18 nm, which are larger than the pore size of MOF-5 (1.3 nm). This clearly demonstrates that those ZnO nanoparticles are located outside the pores of MOF-5.     

Rapid and high-capacity ultrasonic assisted adsorption of ternary toxic anionic dyes onto MOF-5-activated carbon: Artificial neural networks,partial least squares,desirability function and isotherm and kinetic study

The present paper focused on the ultrasonic assisted simultaneous removal of fast green (FG), eosin Y (EY) and quinine yellow (QY) from aqueous media following using MOF-5 as a metal organic framework and activated carbon hybrid (AC-MOF-5). The structure and morphology of AC-MOF-5 was identified by SEM, FTIR and XRD analysis. The interactive and main effects of variables such as pH, initial dyes concentration (mg L⁻¹), adsorbent dosage (mg) and sonication time (min) on removal percentage were studied by central composite design (CCD), subsequent desirability function (DF) permit to achieved real variable experimental condition. Optimized values were found 7.06, 5.68, 7.59 and 5.04 mg L⁻¹, 0.02 g and 2.55 min for pH, FG, EY and QY concentration, adsorbent dosage and sonication time, respectively. Under this conditions removal percentage were obtained 98.1%, 98.1% and 91.91% for FG, EY and QY, respectively. Two models, namely partial least squares (PLS) and multi-layer artificial neural network (ANN) model were used for building up to construct an empirical model to predict the dyes under study removal behavior. The obtained results show that ANN and PLS model is a powerful tool for prediction of under-study dyes adsorption by AC-MOF-5. The evaluation and estimation of equilibrium data from traditional isotherm models display that the Langmuir model indicated the best fit to the equilibrium data with maximum adsorption capacity of 21.230, 20.242 and 18.621 mg g⁻¹, for FG, EY and QY, respectively, while the adsorption rate efficiently follows the pseudo-second-order model.     

碱性金属修饰金属有机骨架材料MOF-5吸附位点及其常态下分离二氧化碳/甲烷的应用

利用“一步法”合成并表征了4种碱性金属修饰的金属有机骨架材料MOF-5(记作M-MOF-5,M=Li,Na,K,Mg)。 并应用理想溶液吸附理论(IAST)对样品吸附选择性进行计算比较。 结果表明,碱性金属掺入可以降低MOF-5材料骨架结构的“互穿”程度,同时,在常温常压下,M-MOF-5对CO₂/CH₄的吸附选择性相对MOF-5(选择性为3.79)有着显著提高,尤其是Li-MOF-5(选择性为7.39)。 此外,Li-MOF-5的CO₂捕获能力相对MOF-5也有提高。