碳纤维复合材料的激光清洗等离子体光谱在线检测研究

近年来碳纤维复合材料（CFRP）由于性能优异，受到工业领域广泛关注。采用激光清洗技术预处理碳纤维复合材料表面的污染物和环氧树脂等杂质，有利于改善碳纤维复合材料表面性能，提高碳纤维复合材料胶接界面的结合强度。在线检测激光清洗过程，实时判断碳纤维复合材料的表面清洗质量，是保证激光清洗效果的关键环节，也是激光清洗装置自动化、集成化的核心技术。激光诱导等离子体光谱技术可以快速分析材料表面元素变化，实现在线检测激光清洗表面状态，在激光清洗领域有很广的应用前景。采用Nd∶YAG高能量脉冲激光器产生的1 064 nm激光在空气环境中诱导产生等离子体，利用改进型光栅光谱仪(ME5000)获取等离子体光谱，在线检测激光清洗碳纤维复合材料。研究外界空气环境对等离子体光谱检测结果的影响，发现350~700 nm波段的元素谱线可用于碳纤维复合材料表面物质成分分析；采用电子扫描显微镜观测的激光清洗表面形貌和X射线电子能谱仪测得的元素变化共同表征等离子体光谱检测的有效性，通过采集不同激光能量以及不同作用次数的等离子体光谱图，获得碳纤维复合材料表层树脂物质通过激光单次清洗干净的阈值，研究激光清洗质量与激光诱导等离子体谱线成分及其强度变化的关系。结果表明：在获取的激光诱导等离子体光谱中，光谱图中谱线波长在393.3 nm的S(Ⅱ)和589.5 nm的S(Ⅱ)谱线可有效在线表征碳纤维复合材料表面清洗质量；激光单次去除干净表面环氧树脂的阈值为10.68 mJ；低激光能量时需要清洗多次可以去除干净表面树脂；高激光能量时清洗单次可使表面树脂去除干净，多次清洗易造成基体损伤。实验结果为激光清洗碳纤维复合材料的智能集成化应用提供工艺依据和技术支持。     

Dynamics of laser-induced cavitation bubble during expansion over sharp-edge geometry submerged in liquid – an inside view by diffuse illumination

Laser ablation in liquids is growing in popularity for various applications including nanoparticle production, breakdown spectroscopy, and surface functionalization. When laser pulse ablates the solid target submerged in liquid, a cavitation bubble develops. In case of “finite” geometries of ablated solids, liquid dynamical phenomena can occur inside the bubble when the bubble overflows the surface edge. To observe this dynamics, we use diffuse illumination of a flashlamp in combination with a high-speed videography by exposure times down to 250 ns. The developed theoretical modelling and its comparison with the experimental observations clearly prove that this approach widens the observable area inside the bubble. We thereby use it to study the dynamics of laser-induced cavitation bubble during its expansion over a sharp-edge (“cliff-like” 90°) geometry submerged in water, ethanol, and polyethylene glycol 300. The samples are 17 mm wide stainless steel plates with thickness in the range of 0.025–2 mm. Bubbles are induced on the samples by 1064-nm laser pulses with pulse durations of 7–60 ns and pulse energies of 10–55 mJ. We observe formation of a fixed-type secondary cavity behind the edge where low-pressure area develops due to bubble-driven flow of the liquid. This occurs when the velocity of liquid overflow exceeds ~20 m s⁻¹. A re-entrant liquid injection with up to ~40 m s⁻¹ velocity may occur inside the bubble when the bubble overflows the edge of the sample. Formation and characteristics of the jet evidently depend on the relation between the breakdown-edge offset and the bubble energy, as well as the properties of the surrounding liquid. Higher viscosity of the liquid prevents the generation of the jet.     

Translational cooling of doped nanocrystals by Raman pulses: Towards macroscopic quantum state

One of the most interesting problems of modern physics is the realization of nanoparticles in macroscopic quantum states, in which they behave as a quantum objects. These states can only be implemented at ultra-low translational temperatures that have not been achieved so far. Here we develop a novel method for optical cooling of CaF₂:Yb³⁺ nanocrystals, which is based on the coherent population transfer induced in the impurity ions by ultraviolet Raman pulses. A doped nanocrystal localized in a radio-frequency trap is cooled due to the photon recoil from the pulses of varied intensity. The proposed method allows to obtain nanocrystals with translational temperatures of the order of 10^?9 K, which indicates that the nanocrystal approaches a macroscopic quantum state.     

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C⁴D‐LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid, 15 mM 2‐amino‐2‐hydroxymethyl‐propane‐1,3‐diol, and 2 mM 18‐crown‐6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double‐opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C⁴D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.     

An experimental method for eliminating effect of rigid out-of-plane motion on 2D-DIC

The out-of-plane motion is one of the most important factors that affect the precision of two-dimensional digital image correlation (2D-DIC). In this paper, a novel solution is presented to improve conventional 2D-DIC by eliminating the effect of out-of-plane motion, including translation and rotation. Firstly, an experimental technique using two projected laser strips is proposed to measure the out-of-plane motion of a planar specimen. A theoretical model is then established to predict the pseudostrains caused by out-of-plane motion based on the pin-hole imaging model. Using the measured out-of-plane displacement, the captured deformed images used in 2D-DIC are amended to eliminate the effect of out-of-plane motion by the theoretical model. Finally, two experiments were conducted to validate the effectiveness of the proposed method. Results indicate that application of the proposed method can effectively eliminate the errors caused by out-of-plane motion.     

Optical analysis of polymer powder materials for Selective Laser Sintering

This study increases the basic understanding of optical material properties of polymer powders used in selective laser sintering (SLS). Therefore, different polymer powder materials were analyzed regarding their optical material properties with an integration spheres measurement setup. By the measurements a direct connection between the absorption behavior of the solid material and the overall optical material characteristics of the same material in powdery form could be shown. The results were used to develop an advanced explanation model for the optical material properties of powders. At present, existing explanation models only consider the occurring of multiple reflections in the gaps between the particles to explain the overall optical material properties of powder materials. Thus, by also considering the absorption behavior of the single particles, the basic understanding of the beam-matter interaction and their effect on the optical material properties of powder materials can be expanded.     

Interface and defects engineering for multilayer laser coatings

High-reflective multilayer laser coatings are widely used in advanced optical systems from high power laser facilities to high precision metrology systems. However, the real interface quality and defects will significantly affect absorption/scattering losses and laser induced damage thresholds of multilayer coatings. With the recent advances in the control of coating design and deposition processes, these coating properties can be significantly improved when properly engineered the interface and defects. This paper reviews the recent progress in the physics of laser damage, optical losses and environmental stability involved in multilayer reflective coatings for high power nanosecond near-infrared lasers. We first provide an overview of the layer growth mechanisms, ways to control the microstructures and reduce layer roughness, as well as the nature of defects which are critical to the optical loss and laser induced damage. Then an overview of interface engineering based on the design of coating structure and the regulation of deposition materials reveals their ability to improve the laser induced damage threshold, reduce the backscattering, and realize the desirable properties of environmental stability and exceptional multifunctionality. Moreover, we describe the recent progress in the laser damage and scattering mechanism of nodule defects and give the approaches to suppress the defect-induced damage and scattering of the multilayer laser coatings. Finally, the present challenges and limitations of high-performance multilayer laser coatings are highlighted, along with the comments on likely trends in future.     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.     

角锥棱镜谐振腔激光模式模拟研究

为了探究角锥棱镜谐振腔激光模式,以角锥-平面镜腔为例,将角锥棱镜等效为衍射光栅,考虑角锥镜棱宽在谐振腔中的衍射效应以及二面角误差引起的附加相位分布对谐振腔激光模式的影响,在光学谐振腔理论的基础上,建立了求解本征模式的理论分析模型.采用快速傅里叶法数值模拟不同腔长、角锥镜棱宽和二面角误差情况下该无源谐振腔激光输出模式分布情况.结果表明,在腔长30 cm、角锥镜棱宽小于75μm、二面角误差在-10′~5′之间时,可实现光斑完整的圆形分布输出模式,且有较好的光束质量;棱宽不小于0.4 mm,二面角误差在-40′~10′之间时,光斑为TEM 03阶横模,光场呈六瓣分布;当角锥镜棱宽为0.4 mm、二面角误差为3′,腔长从30~90 cm范围内增加时,该谐振腔输出的激光模式从TEM 03转换成TEM 10.