Hudson模型适用性及储层微观建模应用*

为明确裂缝间相互作用对各向异性的影响，本文以Hudson模型为例分析了裂缝密度、裂缝倾角对地震波波场、弹性常数和Thomsen系数的影响规律，然后采用“基质-骨架-流体”组合化的方法进行了裂缝储层微观尺度的建模，并与实际测井资料进行了对比。结果表明该模型适用条件为低裂缝密度储层，二阶模型适用的裂缝密度范围比一阶模型大，但在裂缝密度过大时，二阶模型会出现不收敛的现象，模型便不再适用。裂缝储层纵横波速度随裂缝倾角增大而增大，纵波速度对裂缝倾角更为敏感。另外，在与实际测井曲线对比时，在高裂缝密度地层二阶模型的应用效果明显优于一阶模型，说明了在高裂缝密度储层考虑裂缝间的相互作用的必要性。     

Lump waves,solitary waves and interaction phenomena to the (2 + 1)-dimensional Konopelchenko–Dubrovsky equation

In this paper, we investigated the $(2+1)$-dimensional Konopelchenko–Dubrovsky equation. The lump waves, solitary waves as well as interaction between lump waves and solitary waves are presented based on the Hirota bilinear form of this equation. It is worth noting that the rational solutions are obtained by taking a long wave limit, and we also discussed the lump solutions and rogue wave solutions. Moreover, all these solutions are presented via 3-dimensional plots and density plots with choosing some special parameters to show the dynamic graphs.     

Determination of Anti-Parkinson Drug Pramipexole Using a Label-free Biosensor and Evaluation of its Interaction with ds-DNA

In this study, we fabricated an effective and sensitive DNA biosensor based on flower-like Pt/NiCo₂O₄ modified carbon paste electrode (FL-Pt/NiCo₂O₄/CPE) for detection of pramipexole (PPX). Spectrophotometry, differential pulse voltammetry (DPV) and docking methods were employed to evaluate the interaction of DNA-PPX. Moreover, the DPV technique was chosen to monitor the electrochemical response of guanine on the DNA biosensor. The relationship between the concentration of PPX and the oxidation signal of guanine was linear in the range of 0.4 to 310.0 μM and a limit of detection (LOD) of 0.09 μM was calculated.     

Light-induced interaction between graphene and magnetic film in a cavity

An interaction mechanism between graphene and magnetic film in cavity is presented in this work. The pseudospin in graphene can indirectly interact with the spins in magnetic film by the media of a circularly polarized photons under the conditions of high temperature and intense laser field. The interaction energy as well as the average values of pseudospin and spin components are calculated according to a generating functional approach. This interaction mechanism provides a scheme of detecting the pseudospin polarization effect.     

暗怪波的相互作用

以耦合非线性薛定谔方程为理论模型,数值研究了两个一阶暗怪波在正常色散单模光纤中的相互作用.基于一阶暗怪波精确解,采用分步傅里叶数值模拟法,从间距、相位差和振幅系数比方面讨论相邻两个一阶暗怪波之间的相互作用.基于二阶暗怪波精确解,讨论了两个一阶暗怪波的非线性相互作用.研究结果表明:同相位情况下,间距参数T1为0、5、20时,相邻两个一阶暗怪波相互作用激发产生“扭结型”暗怪波.相比较于单个暗怪波发生能量的弥散,“扭结型”暗怪波分裂形成多个次暗怪波.反相位情况下,间距参数T1为2、7、12时,相邻两个一阶暗怪波相互作用也可以激发产生“扭结型”暗怪波.并且“扭结型”暗怪波初始激发的空间位置偏离原始单个暗怪波的位置5.振幅系数比越大,该空间位置越接近5.二阶暗怪波可以看作是两个一阶暗怪波的非线性叠加,复合型和三组分型二阶暗怪波与相邻两个一阶暗怪波的相互作用略有相似.     

Toward efficient interactions of bubbles and coal particles induced by stable cavitation bubbles under 600 kHz ultrasonic standing waves

The interactions of bubbles and coal particles in 600 kHz ultrasonic standing waves (USW) field has been investigated. A high-speed camera was employed to record the phenomena occurred under the USW treatment. The formation and behaviors of cavitation bubbles were analyzed. Under the driving of these cavitation bubbles, whose size is from several microns to dozens of microns, coal particles were aggregated and then attracted by large bubbles due to the acoustic radiation forces. The results of USW-assisted flotation show a significant improvement in recoveries at 600 kHz, which indicates that the interactions of bubbles and particles in the USW field are more efficient than that in the conventional gravitational field. Furthermore, the sound pressure distribution of the USW was measured and predicted by a hydrophone. The analysis of gravity and buoyancy, primary and secondary Bjerknes forces shows that bubble-laden particles can be attracted by the rising bubbles under large acoustic forces. This study highlights the potential for USW technology to achieve efficient bubble-particle interactions in flotation.     

Inlaying Bismuth Nanoparticles on Graphene Nanosheets by Chemical Bond for Ultralong-Lifespan Aqueous Sodium Storage

Rechargeable aqueous sodium ion batteries (ASIBs) are rising as an important alternative to lithium ion batteries, owing to their safety and low cost. Metal anodes show a high theoretical capacity and nonselective hydrated ion insertion for ASIBs, yet their large volume expansion and sluggish reaction kinetics resulted in poor electrochemical stability. Herein, we demonstrate an electrode cyclability enhancement mechanism by inlaying bismuth (Bi) nanoparticles on graphene nanosheets through chemical bond, which is achieved by a unique laser induced compounding method. This anchored metal-graphene heterostructure can effectively mitigate volume variation, and accelerate the kinetic capability as the active Bi can be exposed to the electrolyte. Our method can achieve a reversible capacity of 122 mAh g⁻¹ at a large current density of 4 A g⁻¹ for over 9500 cycles. This finding offers a desirable structural design of other metal anodes for aqueous energy storage systems.     

Easily Scalable Shell-Structured Copper Catalyst with High Activity and Durability for Carbon Dioxide Hydrogenation

Inducing strong metal-support interaction (SMSI) has been a useful way to control the structure of surface active sites. The SMSI often causes the encapsulation of metal particles with an oxide layer. Herein, an amorphous ceria shell was formed on Cu nanoparticles under a mild gas condition with high activity and durability for surface reaction. Cu−Ce solid solution promoted the transfer of surface oxygen species, which induced the ceria shell formation on Cu nanoparticles. This catalyst was used for CO₂ hydrogenation, selectively producing CO with high low-temperature activity and good durability for operation at high temperature. CO₂ activation and H₂ spillover could occur at low temperatures, enhancing the activity. The shell prevented the sintering, assuring durability. This catalyst was applied to a bench-scale reactor without loss in performance, resulting in high CO productivity in all temperature ranges.     

Interfacial Assembly of Nanocrystals on Nanofibers with Strong Interaction for Electrocatalytic Nitrate Reduction

One-dimensional fiber architecture serves as an excellent catalyst support. The orderly arrangement of active materials on such a fiber substrate can enhance catalytic performance by exposing more active sites and facilitating mass diffusion; however, this remains a challenge. We developed an interfacial assembly strategy for the orderly distribution of metal nanocrystals on different fiber substrates to optimize their electrocatalytic performance. Using electrochemical nitrate reduction reaction (NO₃⁻RR) as a representative reaction, the iron-based nanofibers (Fe/NFs) assembly structure achieved an excellent nitrate removal capacity of 2317 mg N/g Fe and N₂ selectivity up to 97.2 %. This strategy could promote the rational design and synthesis of fiber-based electrocatalysts.