Efficient removal of As(V) from simulated arsenic-contaminated wastewater via a novel metal–organic framework material: Synthesis,structure, and response surface methodology

A novel metal–organic framework material {[N(C₂H₅)₃][Zn₂(ptmda)₂(μ₂-H₂O)]·(H₂O)_0.5}_n { GUT-3 ; H₂ptmda is 4,4′-([p-tolylazanediyl]bis [methylene])dibenzoic acid} was successfully synthesized using the hydrothermal method and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. GUT-3 has a two-dimensional network based on dinuclear [Zn₂(ptmda)₂(μ₂-H₂O)]⁻ building units which formed an eightfold interpenetration network in GUT-3 molecules. Hirshfeld surface analysis revealed that H–H, C–H, and O–H bonds accounted for the majority of intermolecular interactions. Moreover, the interactions between GUT-3 and As(V) – the form of As(V) is AsO₄³⁻ – were analyzed in aqueous solutions in a batch system to study the effect of pH, concentration, adsorbent dose, adsorption time, adsorption temperature, and shaking speed. The kinetic and isotherm data of arsenic adsorption on GUT-3 were accurately modeled by pseudo-second-order, Langmuir (q_m = 33.91 mg/g), and Freundlich models. The Box–Behnken response surface method was used to optimize the adsorption conditions of As(V) from the simulated arsenic-contaminated wastewater. The effect of various experimental parameters and optimal experimental conditions was ascertained using the quadratic model.     

Preparation of Fe−Co−LDH/MXene modified electrode for sensitive determination of arsenic (III) in aquatic system

3-dimensional (3D) Fe−Co−LDH/MXene composite was synthesized by in-situ synthesis and assembly of Fe−Co−LDH rod around MXene under hydrothermal condition. Due to the unique 3D configuration and good conductivity, the obtained Fe−Co−LDH/MXene modified glassy carbon electrode (Fe−Co−LDH/MXene/GCE) showed excellent electrochemical activity for As(III) detection. Via square-wave anodic stripping voltammetry, the response current on Fe−Co−LDH/MXene/GCE had good linear relationship with As(III) concentrations (1∼1000 ppt) with superior sensitivity (0.22 μA ppt⁻¹ cm⁻²) and low detection limit (0.9 ppt). The mechanism of As(III) adsorption was demonstrated. The electrode showed excellent anti-interference ability. Real water sample analysis demonstrated the Fe−Co−LDH/MXene/GCE was deployable in aqua-system.     

微生物铁氧化还原作用对水中砷锑去除影响的研究进展

砷锑污染在全球领域广泛存在,与常规的铁氧化物相比,微生物铁氧化生成的含Fe(Ⅲ)矿物对水中砷/锑(As/Sb)具有更强的吸附能力,并因其高效、实用和环境友好而具有广阔的应用前景,但微生物铁还原也可能导致被吸附的As/Sb再次释放。本文综述了微生物铁氧化还原作用对As/Sb去除影响的研究进展,归纳了铁矿物“合成-溶解-转化”的微生物循环过程以及该循环伴随的水中As/Sb固定、溶解与转化机理,整合了微生物合成Fe(Ⅲ)矿物的矿物学性质、对As/Sb固定的热动力学规律和络合机制,总结了微生物合成Fe(Ⅲ)矿物对As/Sb去除的影响因素,基于该研究的现存问题展望了利用微生物铁氧化还原作用去除As/Sb的发展方向。     

Effective biosorption of arsenic from water using La(III) loaded carboxyl functionalized watermelon rind

Arsenic is highly toxic and carcinogenic element that mainly enters into our body through drinking water and caused adverse effect even at low concentration. A new type of cation exchanger is developed from waste biomass of watermelon rind after increasing the carboxyl functional groups by saponification. Saponified Watermelon Rind (SWR) was further loaded with La(III) to attenuate the contamination of As(III) from water. Characterization of biosorbent was performed using Fourier Transform Infra-Red (FTIR) spectroscopy, Field emission Scanning Electron Microscopy (Fe-SEM,) Energy Dispersive X-ray (EDX) spectroscopy and zeta potential analysis. Arsenic speciation of sorption product through X-ray photoelectron spectroscopic (XPS) analysis revealed that As(III) is partially converted into As(V) during biosorption process. The biosorption tests for As(III) were explored under different operating conditions. La(III)-SWR towards As(III) biosorption was best described by Langmuir biosorption isotherm and pseudo second order kinetic model. At a pH of 12.08, the optimum biosorption capacity was found to be 37.73 ± 0.12, 48.78 ± 0.09, 62.50 ± 0.11 mg/g, respectively at temperatures 298 K, 303 K and 308 K. The existance of chloride and nitrate showed negligible interference whereas sulphate and phosphate significantly inhibits As(III) biosorption. Thermodynamic study showed spontaneous and endothermic nature As(III) biosorption onto La(III)-SWR. The sorbed As(III) was eluted almost completely using 2 M NaOH. The findings of this study insinuated that La(III)-SWR biosorbent investigated in this study can be a low cost, environmentally benign and eco-friendly material for the treatment of aqueous solution polluted with arsenic ions.     

电感耦合等离子体发射光谱法测定粗二氧化碲中 铜、铅、锑、铋、砷和硒

粗二氧化碲作为碲精炼或碲化工产品生产的重要原料,其中共存元素铜、铅、砷、锑、铋、硒含量的准确测定对于生产过程质量控制和贸易结算具有重要意义,但目前没有粗二氧化碲中铜、铅、砷、锑、铋、硒含量检测的标准分析方法。采用王水和饱和氟化氢铵分解试样,在王水和酒石酸介质中,选用Cu 327.393 nm、Pb 220.353 nm、Sb 217.582 nm、Bi 223.061 nm、As 193.696 nm、Se 196.026 nm为分析谱线,采用电感耦合等离子体发射光谱(ICP-AES)法测定粗二氧化碲中铜、铅、锑、铋、砷和硒含量。各元素校准曲线的相关系数均大于0.999;铜、铅、锑、铋、砷和硒的检出限分别为0.0004%、0.0005%、0.0006%、0.0007%、0.0004%和0.0007%,定量检出限分别为0.0012%、0.0016%、0.0020%、0.0025%、0.0013%和0.0025%。按照实验方法测定5个粗二氧化碲样品中铜、铅、锑、铋、砷和硒,测定结果的相对标准偏差(RSD,n=7)为0.79%~4.8%,加标回收率为96.0%~103%。方法简单,精密度和准确度较高,可用于测定粗二氧化碲中铜、铅、砷、锑、铋、硒含量。     

Calcium Sulfite Solids Activated by Iron for Enhancing As(III) Oxidation in Water

Desulfurized gypsum (DG) as a soil modifier imparts it with bulk solid sulfite. The Fe(III)–sulfite process in the liquid phase has shown great potential for the rapid removal of As(III), but the performance and mechanism of this process using DG as a sulfite source in aqueous solution remains unclear. In this work, employing solid CaSO₃ as a source of SO₃²⁻, we have studied the effects of different conditions (e.g., pH, Fe dosage, sulfite dosage) on As(III) oxidation in the Fe(III)–CaSO₃ system. The results show that 72.1% of As(III) was removed from solution by centrifugal treatment for 60 min at near-neutral pH. Quenching experiments have indicated that oxidation efficiencies of As(III) are due at 67.5% to HO^•, 17.5% to SO₅^•− and 15% to SO₄^•−. This finding may have promising implications in developing a new cost-effective technology for the treatment of arsenic-containing water using DG.     

低相对分子质量有机酸对α-FeO(OH)吸附As(Ⅲ)的影响

制备并表征了α-FeO(OH),探究了4种低相对分子质量有机酸(LMW)对α-FeO(OH)吸附As(Ⅲ)的影响,并阐明了机理。 单一和混合LMW对α-FeO(OH)吸附As(Ⅲ)均有抑制作用,4种LMW的影响大小顺序为:草酸(OA)>柠檬酸(CA)>乳酸(LA)、水杨酸(SA)。 混合LMW的影响为:OA会加剧CA对α-FeO(OH)吸附As(Ⅲ)的影响,而SA几乎不起作用。 当ρ(As(Ⅲ))较低,LMW通过与α-FeO(OH)的静电引力、与α-FeO(OH)表面的铁离子形成配合物、生成沉淀从而影响α-FeO(OH)对As(Ⅲ)的吸附;当ρ(As(Ⅲ))较高,LMW还通过阻碍As(Ⅲ)在α-FeO(OH)上的扩散和沉淀作用产生影响。 实验结果为土壤中As(Ⅲ)的迁移转化、污染治理提供技术支撑。     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

Distribution of arsenic species in environmental samples collected in Northern Chile

Gradient ion chromatographic separation coupled with ICP-MS was used to resolve and determine the most common arsenic species in environmental and biological samples of carrots, trout, soil, sediment and river water from Region II of Chile. The carrot and trout samples showed a concentration of 49 and 168 µg g^?1, respectively, of total As. Both concentrations are high considering the basal level. In the carrots, percentage of 45 and 31% of total As were found for As(III) and As(V) species, respectively. In the trout, the higher concentration related to AsB at 39% of the total As. As(III) and DMA were also present in relatively high concentrations. The River Loa and the soil in which the carrots are growing also present very high As(V) concentrations of 100 and 17 µg g^?1, respectively. The ratio between the concentration for the same As species found in the living organisms (carrots and trout) and the environment in which they grow (soil and water) can provide important information about the possible absorption or biotransformation of As species in living beings. As(III) and DMA are the species in which the greatest accumulation occurs with respect to the medium in which they are present, and biotransformation also appears to take place.     

Comparison of microstructure and mechanical properties of ultra-narrow gap laser and gas-metal-arc welded S960 high strength steel

The microstructural characteristics and mechanical properties, including micro-hardness, tensile properties, three-point bending properties and Charpy impact toughness at different test temperatures of 8 mm thick S960 high strength steel plates were investigated following their joining by multi-pass ultra-narrow gap laser welding (NGLW) and gas metal arc welding (GMAW) techniques. It was found that the microstructure in the fusion zone (FZ) for the ultra-NGLW joint was predominantly martensite mixed with some tempered martensite, while the FZ for the GMAW joint was mainly consisted of ferrite with some martensite. The strength of the ultra-NGLW specimens was comparable to that of the base material (BM), with all welded specimens failed in the BM in the tensile tests. The tensile strength of the GMAW specimens was reduced approximately by 100 MPa when compared with the base material by a broad and soft heat affected zone (HAZ) with failure located in the soft HAZ. Both the ultra-NGLW and GMAW specimens performed well in three-point bending tests. The GMAW joints exhibited better impact toughness than the ultra-NGLW joints.