Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.     

Greener approach toward synthesis of biologically active s-Triazine (TCT) derivatives: A recent update

The greener methodology to synthesize s-triazine derivatives (also known as TCT) is described, including synthesis through microwave, ultrasound, and solvent-free conditions. This review mainly focuses on reactions of TCT (2,4,6-trichloro-1,3,5-triazine) with various substituents having amine and hydroxy functionalities to give corresponding triazine derivatives under a greener approach. The results of reactions indicate that, unlike classical methods, green methods result in better yields of the product, through a rapid reaction, under mild reaction conditions, and by easy workup procedures.     

两种含大吸电子取代基的SnR_2Cl_2化合物的合成和晶体结构

以SnCl4和2,4,6-(CF3)3C6H2Li、2,6-(CF3)2C6H3Li为原料合成了两种含大吸电子取代基的化合物Sn[2,4,6-(CF3)3C6H2]2Cl2(缩写为SnAr2Cl2)和Sn[2,6-(CF3)2C6H3]2Cl2(缩写为Sn Ar′2Cl2),利用X射线衍射仪和核磁共振谱仪(19F NMR)表征了产物SnAr2Cl2和SnAr′2Cl2的晶体结构.     

Syntheses,structures, and luminescence of three anion-dependent cadmium coordination polymers

Self-assembly of the flexible ligand 1,3,5-tri(1,2,4-triazol-1-ylmethyl)-2,4,6-trimethylbenzene (ttmb) with Cd(II) salts gave three coordination polymers {[Cd(ttmb)₂](SO₄)(H₂O)₁₆} _n (1), {[Cd(ttmb)₂(H₂O)₂](NO₃)₂(H₂O)₆} _n (2), and {[Cd(ttmb)₂(H₂O)₂](ClO₄)₂(H₂O)₇} _n (3). Complex 1 has a (3,6)-connected CdCl₂-type 2-D network. However, 2 and 3 show the 2-D (4,4) network and 1-D double chain, respectively. Complexes 1, 2, and 3 exhibit luminescent emission maxima at 306, 339, and 298?nm, respectively, in the solid state at room temperature.     

三个稀土-主族三金属Ln(III)-Sr(II)-K(I)配合物的结构与发光性质

用2,4,6-吡啶三甲酸和稀土钐、镝或钆的高氯酸盐溶液、碳酸锶、碳酸钾在180℃水热条件下进行反应,制备出3个含有3种金属离子的配位聚合物[LnSrK（ptc）₂（H₂O）]_n（Ln=Sm（1）、Dy（2）、Gd（3）,H₃ptc=2,4,6-吡啶三甲酸）。X射线单晶衍射分析表明三者具有相同的结构,属三斜晶系,P1空间群。配合物中配体2,4,6-吡啶三甲酸根以2种不同的配位方式与3种金属离子配位,一种方式中连接了7个金属离子,另一种方式中连接了8个金属离子。Ln（Ⅲ）为八配位,与羧基上的6个氧原子和2个吡啶环上的2个氮原子配位;Sr（Ⅱ）也是八配位,配位原子均为氧原子;K（I）与5个氧原子配位。荧光发射光谱表明,钐和镝的配合物在紫外光激发下均发射Sm（Ⅲ）和Dy（Ⅲ）两种离子的特征荧光,钆的配合物在紫外光激发下由于发生荷移跃迁而发射绿色荧光。     

由氢键连接的三个金属-有机网状化合物的合成、结构及半导体性质

以2,4,6-三(1-吡唑基)-1,3,5-三嗪(TPTz)与不同金属离子进行溶剂热反应,得到了3个氢键连接的金属-有机网状化合物。实验发现TPTz的水解产物6-(1-吡唑基)-1,3,5-三嗪-2,4-二酚(H₂L)在反应中起到了实际的配位作用。单晶结构分析表明,它们是同构化合物,分子式为[M(HL)₂]·2H₂O(M=Zn,1;Co,2;Mn,3)。每个中心金属原子分别与2个吡唑基上的N、2个吡嗪环上的N和2个水分子中的O形成六配位的结构。2个HL-与1个中心金属配位形成一个零维的金属-有机配合物小分子,这些小分子通过氢键连接进一步拓展为二维层状结构。紫外-可见漫反射(UV-VisDRS)分析结果表明,这3种化合物都是宽系半导体材料,其带隙宽度分别为3.80(Zn),3.30(Co),3.27(Mn)eV,其半导体性质同中心金属原子表现出明显的相关性。     

基于银纳米粒子/氧化石墨烯复合薄膜制备TNP电化学传感器

利用改进的Hummers法制备了氧化石墨烯(GO), 以葡萄糖为还原剂直接在GO表面沉积银纳米粒子(AgNPs)得到性能稳定的AgNPs/GO纳米复合材料;基于该纳米复合材料修饰电极构建了一种新型的2, 4, 6-三硝基苯酚(TNP)电化学传感器。采用原子力显微镜(AFM)、扫描电镜(SEM)、透射电镜(TEM)、紫外可见光谱(UV-Vis)和交流阻抗(EIS)等多种方法对纳米复合薄膜进行了表征;并研究了TNP在复合薄膜修饰电极上的电化学行为和动力学性质。结果表明, AgNPs/GO对TNP有较强的电催化活性, 在复合薄膜修饰电极出现一灵敏的氧化峰和3个还原峰;利用氧化峰可对TNP进行定量分析。同时整个电极过程明显不可逆, 电极反应受到吸附步骤控制;复合膜电极表面覆盖度为5.617×10^-8 mol·cm^-2, 在所研究电位下的速率常数为9.745×10^-5 cm·s^-1。在pH 6.8的磷酸缓冲液中, 当富集电位为-0.70 V, 富集时间为60 s;TNP氧化峰电流与其浓度在5.0×10^-9~1.0×10^-7 mol·L^-1范围内成良好线性关系, 相关系数为0.995 8, 检出限可达1.0×10^-9 mol·L^-1。所制备的电化学传感器稳定性和选择性较好;用于实际水样中TNP的现场快速检测, 加标回收率在 97.6%~103.9%之间。     

基于吡啶多羧酸和N，N′-桥联混合配体的钴配合物的合成及结构分析

将吡啶-2,4,6-三羧酸(2,4,6-pytaH3),4-氨基-3,5-二(4-吡啶基)-1,2,4-三氮唑(4,4′-abpt)和CoCl2在不同的pH条件下发生水热反应,得到2个新的配位聚合物[Co(2,4,6-pytaH)(4,4′-abpt)(H2O)](1)和[Co1.5(2,4,6-pyta)(4,4′-abpt)(H2O)3].3.5H2O(2)。配合物1是在吡啶-2,4,6-三羧酸酸性环境下产生的,吡啶-2,4,6-三羧酸在水热条件下只脱去2个羧基上的质子变成2,4,6-pytaH2-,而配合物2是在NaOH碱性溶液下反应得到的,其中吡啶-2,4,6-三羧酸完全脱去3个羧基上的质子变成2,4,6-pyta3-。配合物1中包含一维Co-羧酸链,2中存在具有(4,4)拓扑网络的二维层。1和2中的一维链和二维层通过π-π堆积和丰富的氢键作用分别拓展成三维超分子网络。单晶结构分析表明,配合物1结晶于单斜晶系,P21/n空间群,a=0.961 30(10)nm,b=0.632 09(6)nm,c=3.372 9(4)nm,β=95.104(2)°,V=2.041 3(4)nm3,Z=4。而配合物2结晶于单斜晶系,P21/c空间群,a=1.795 2(2)nm,b=0.729 62(8)nm,c=2.078 7(2)nm,β=112.323(2)°,V=2.518 6(5)nm3,Z=4。     

Synthesis, characterization and pharmacological activities of 2-[4-cyano-(3-trifluoromethyl)phenyl amino)]-4-(4-quinoline/coumarin-4-yloxy)-6-(fluoropiperazinyl)-s-triazines

A series of 2-[4-cyano-(3-trifluoromethyl)phenyl amino)]-4-(4-quinoline/coumarin-4-yloxy)-6-(fluoropiperazinyl)-s-triazines has been synthesized by a simple and efficient synthetic protocol. The antimicrobial activity of the compounds was studied against several bacteria (Staphylococcus aureus MTCC 96, Bacillus cereus MTCC 619, Escherichia coli MTCC 739, Pseudomonas aeruginosa MTCC 741, Klebsiella pneumoniae MTCC 109, Salmonella typhi MTCC 733, Proteus vulgaris MTCC 1771, Shigella flexneria MTCC 1457) and fungi (Aspergillus niger MTCC 282, Aspergillus fumigatus MTCC 343, Aspergillus clavatus MTCC 1323, Candida albicans MTCC 183) using paper disc diffusion technique and agar streak dilution method. Newly synthesized compounds were also tested for their in vitro antimycobacterial activity against Mycobacterium tuberculosis H37Rv using BACTEC MGIT and Lowenstein-Jensen MIC method.     

磁载光催化剂Fe3O4/C/TiO2的制备及对三氯苯酚的降解

以FeCl3为铁源,葡萄糖为碳源,钛酸四丁酯为钛源,采用水热法制备了磁载光催化剂Fe3O4/C/TiO2,用TEM、EDX、VSM、XRD和IR对Fe3O4/C/TiO2的粒径、形貌和物相等进行了表征。研究了该催化剂对三氯苯酚的降解性能,探讨了其重复使用的可能性,用荧光光谱法推测了可能的反应机理。结果表明该材料结合了光催化与可再生的优点,1 g·L-1 Fe3O4/C/TiO2在18 W紫外灯下,50 min内可将三氯苯酚降解97.9%以上,6次循环使用后降解率仍保持在95.1%,降解过程中有羟基自由基生成。