Short Syntheses of some ‘Decalin‐1,8‐diones’ and their Derivatives: Breaking the Pretended Symmetry

A cheap synthesis of the so‐called ‘decalin‐1,8‐diones’ started with the conjugate (1,4‐) addition of cyclohex‐2‐en‐1‐one derivatives to the γ‐position of the dilithium derivative (buta‐1,3‐diene‐1,1‐bis(olate)) of crotonic acid. Hydrogenation of these ‘1,4‐γ’ adducts and final cyclization afforded the enol tautomers of decalin‐1,8‐diones. Nucleophilic substitutions at these 3‐oxoenols by NH₃ or primary amines created only monoamino products (namely, 3‐oxoenamines) whose reactions with OPCl₃ yielded dihydro(1,3,2)oxazaphosphinin‐2‐one derivatives. The two regioisomers of a trimethyl‐3‐oxoenamine served as models for the constitutional assignments of the two rapidly interconverting (hence, individually NMR‐invisible), tautomeric trimethyl‐3‐oxoenols. Such methyl substitutions served to break the ‘pretended’ symmetry of ‘decalin‐1,8‐dione’. Hydrazine and 3‐oxoenols furnished oxygen‐free indazole derivatives whose N?H bonds exchanged with t_1/2=ca. 0.00035 s at ca. ?58(9) °C.     

19F-detected dual-optimized inverted 1JCC 1,n-ADEQUATE

Modification of the recently reported ¹⁹F-detected 1,1-ADEQUATE experiment that incorporates dual-optimization to selectively invert a wide range of ¹J_CC correlations in a 1,n-ADEQUATE experiment is reported. Parameters for the dual-optimization segment of the pulse sequence were modified to accommodate the increased size of ¹J_CC homonuclear coupling constants of poly- and perfluorinated molecules relative to protonated molecules to allow broadband inversion of the ¹J_CC correlations. The observation and utility of isotope shifts are reported for the first time for 1,1- and 1,n-ADEQUATE correlations.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

基于三次Bézier基函数插值的GM(1,1)模型背景值优化研究

本文研究了传统灰色GM(1,1)模型存在模型精度不高的问题.利用带形状参数的三次Bézier基函数,给出插值函数的表达式,并结合复化梯形公式,给定误差限的方法,获得了比传统灰色GM(1,1)模型更高精度的结果.推广了传统灰色GM(1,1)预测模型的结果.     

GARCH(1,1)模型的稳健估计比较及应用

首先阐述了GARCH(1,1)模型稳健估计的构造方法,然后在模型有无异常值扩散效应约束和异常值比例不同的情况下,比较了传统QMLE估计和多种稳健M估计的表现,结果表明:在数据无异常值下,QMLE估计较优;随着异常值比例增加,稳健Andrew估计表现更好;模型施加异常值扩散效应约束对估计有一定改善但不显著.最后选取波动程度不同的两个阶段沪深300指数的收益率,用模型拟合进行了实例比较,在波动程度较大时,Andrew估计效果较优,在波动相对平稳时,LAD估计较优.     

灰色GM(1,1)模型研究综述

GM(1,1)是灰色预测理论的核心模型和基础模型.从累加生成方法、初值优化、背景值优化、参数估计方法、模型性质和模型拓展的视角,梳理了GM(1,1)模型的研究进展.明确了有待进一步研究的问题,对GM(1,1)模型的未来研究方向提出了建议.     

基于改进的GM(1,1)-Markov链组合模型广东省单位GDP能耗预测

本文以灰色系统理论的GM(1,1)模型和随机过程理论的Markov链模型为基础构建了一个动态GM(1,1)-Markov链组合预测模型。该模型同时利用了GM(1,1)模型对序列趋势因素良好的拟合能力和Markov链模型对残差序列信息的提取能力。为进一步提高该模型的预测精度,用泰勒(Taylor)近似方法和新信息优先的思想对该模型进行了改进。最后,以1991-2014年广东省单位GDP能耗数据实证了该模型的预测效果。     

绿色氧化法制备联苯类化合物的研究性实验设计与实践*

以苯甲醛和丙酮为原料,利用Robinson增环反应先制备3-甲基-5-苯基环己-2-烯-1-酮,再引导学生设计并研究了水相绿色氧化3-甲基-5-苯基环己-2-烯-1-酮合成联苯类化合物3-乙氧基-5-甲基-1,1′-联苯的影响因素,利用核磁共振确定了产物结构。该研究性实验教学以绿色化学为中心,结合了2步连续反应,产物易提纯且产率高,并开展了开放式大型分析仪器教学和测试,对学生有机合成实验能力和科学研究能力的培养具有很好的教学效果。     

1，1''-二羟基-5，5''-联四唑的镧系金属配合物的合成、表征及热行为

以1,1′-二羟基-5,5′-联四唑(H_2BTO)为配体,镧系金属离子作为金属中心,采用溶剂热法制备了5种金属配合物:[La_2(BTO)_3(H_2O)_8]·2H_2O (1)、[Ce_2(BTO)_3(H_2O)_8]·2H_2O (2)、[Pr_2(BTO)_3(H_2O)_8]·2H_2O (3)、[Sm_2(BTO)_3(H_2O)_8]·2H_2O (4)和[Nd_2(BTO)_3(DMF)_4]·6H_2O (5)。通过单晶X射线衍射和元素分析对5种配合物的结构进行了表征。结果表明,5种配合物均属于单斜晶系,P2_1/n空间群。利用差示扫描量热法研究了配合物1～4的热稳定性,采用Kissinger法和Ozawa法分别计算了其热分解动力学参数。