二氧化锰/钒酸铋复合光催化剂的制备及性能

采用液相沉淀法制备了不同锰含量的二氧化锰(MnO_2)/钒酸铋(BiVO_4)复合光催化剂,利用XRD、SEM、XPS等对催化剂进行了表征。通过对罗丹明B的降解,研究了不同锰含量的光催化剂在太阳光下的光催化降解性能,并考察了催化剂用量对光降解率的影响。结果表明,制备出的不同Mn含量的BiVO_4光催化剂均为单斜晶型结构,且Mn元素是以MnO_2的形式存在,说明Mn元素的引入没有改变BiVO_4的晶型和结构。其中Mn含量为1.67%的BiVO_4样品具有最高的光催化活性,光催化反应90 min对罗丹明B溶液的降解率可达到26.39%,比纯BiVO_4样品的降解率(14.06%)提高了近一倍,其催化性能提高的原因可能是由于一定量MnO_2的存在使催化剂中光生电子-空穴的高效分离造成的。同时发现当MnO_2的含量过高,由于形貌分布不均,会变成光生电子和空穴的复合中心,致使催化剂的活性降低。不同用量的同种催化剂光降解实验结果表明:对罗丹明B的光降解率随催化剂用量的增加而增大,但超过一定用量后,光降解率增加速度变缓。     

一种新型双吡啶悬臂Mn(Ⅱ)配合物的合成、晶体结构及DNA结合能力研究

通过3,3′-((乙烷-1,2-二基双(2-甲基吡啶杂氮二基)双(亚甲基))双(2-羟基-5-甲基苯甲醛)与2-羟基-1,3-丙二胺的缩合反应得到一种具有双吡啶悬臂的双核锰配合物。通过X射线单晶衍射确定了该配合物结构,结果显示其分子式为[Mn₂(C₃₇H₄₃N₆O₆)]·(ClO₄)₂。该配合物属于单斜晶系,P2₁/c空间群,晶胞参数为:a=1.096 50(19) nm, b=1.419 5(3) nm, c=3.109 4(5) nm, β=108.153(5)°。进一步分析表明两个二价锰离子分别与(N_amine)₂(N_imine)₂O₃和(N_imine)₂O₄体系配位,它们与配位原子形成的几何构型分别是十面体和扭曲的八面体。两个中心锰离子距离为0.331 6 nm,由酚氧原子和醋酸根共同桥联。另外,本文也利用伏安法和黏度法对该配合物与小牛胸腺DNA的结合能力进行研究,实验结果表明它们之间的结合方式为弱的插入作用。     

新型含磺酸基配体锰配合物的水热合成及其性能

采用水热法合成了单核锰配合物[Mn(H₂L)(phen)₂(H₂O)]（1, H₂L_2-=4,5-二羟基苯-1,3-二磺酸根离子，phen=1,10-邻菲罗啉），其结构和性能经X-射线单晶衍射、红外光谱、荧光光谱、元素分析和热重分析表征。研究表明，配合物中锰离子是六配位的，与两个phen配体的四个氮原子配位以及水分子和磺酸基氧原子配位，形成扭曲的八面体配位构型。1的荧光发射峰与配体相比发生了蓝移，最大发射峰位于390 nm。     

富Mn鸢尾生物炭的制备及在类Fenton体系中的应用

通过在N₂气氛围下热裂解富集Mn的鸢尾可得到Mn/生物炭(BC)材料, 并按植物叶(Leaf)和根部(Root)分别将其分别命名为BC-L0, BC-L1, BC-L2, BC-R0, BC-R1和BC-R2. 采用扫描电子显微镜(SEM)、 能谱分析(EDS)仪、 X射线衍射(XRD)仪、 X射线光电子能谱(XPS)、 傅里叶变换红外光谱(FTIR)、 原子吸收光谱(AAS)和比表面积分析(BET)仪等对Mn/生物炭材料的Mn含量、 化学组成与形貌进行了表征, 发现鸢尾叶部为Mn主要富集部位, 最大富集量为13.0 mg/g, 且Mn以Mn₂O₃薄片存在于生物炭表面. 利用Mn/生物炭与H₂O₂构建了类Fenton体系, 在中性条件下BC-L2-H₂O₂体系对有机污染物罗丹明B(RhB, 3×10 ^-5 mol/L)的降解率达到50%(180 min), 表明该体系具备氧化去除RhB的能力, 并推测了该体系对RhB的催化氧化机理. 结果表明, 先将Mn超富集植物转化为Mn/生物炭材料, 再通过添加H₂O₂能构建具有氧化能力的类Fenton体系, 可用于对有机污染物的降解, 实现“以废治废”的绿色循环思路, 为Mn富集的植物后续处理提供一种新的转化及应用方式.     

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

N-杂环卡宾-吡啶锰配合物/四丁基碘化铵催化CO2和环氧化物合成环状碳酸酯(英文)

该工作发展了一类二齿N-杂环卡宾(NHC)-吡啶锰配合物催化CO₂和环氧化物偶联反应的方法.锰配合物和四丁基碘化铵(TBAI)构成的二元催化体系对环氧化物和CO₂合成环状碳酸酯的反应表现出了较高的活性.该二元催化体系适用于广泛的底物范围,例如端环氧化物和高位阻的内环氧化物.通过紫外-可见光谱、红外光谱和高分辨质谱的研究对反应机理进行了阐述.     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。