基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

单位圆内解析系数的高阶齐次线性微分方程解与小函数的关系

本文对系数为单位圆内的解析函数的某类高阶齐次线性微分方程解的性质进行研究,得到解的增长级和超级的精确估计以及解与小函数之间的关系.     

还原氮化温度对氮化铌纳米管组成、结构与电化学性能影响研究

以铌箔为基底,用阳极氧化法结合氨气还原氮化法制备出氮化铌纳米管,利用X射线衍射仪(XRD)、X射线光电子能谱(XPS)和扫描电镜(SEM)等结构表征手段和循环伏安法(CV)、充放电(GCD)和交流阻抗法(EIS)等电化学测试手段研究了还原氮化温度对纳米管的物相、形貌以及电化学性能的影响.结果表明,还原氮化后出现了氮化铌物相,以氧氮化铌固溶体形式存在,当还原氮化温度为700℃时,氮化铌纳米管阵列结构均匀,纳米管的孔内径约为35 nm,管壁厚度约为12 nm,纳米管长度约为1.5μm,样品中内在阻抗和电荷转移电阻较小,在电流密度为0.1 mA/cm2时,其比电容为400μF/cm2.     

氮氧共掺杂多孔炭的制备及其锌离子混合超级电容器性能研究

本研究以价格低廉、来源广泛的煤沥青作为炭前驱体、尿素作为氮源和模板、氢氧化钠作为活化剂,通过结合模板法与化学活化法成功制备了具有纳米片状结构的氮氧共掺杂的多孔炭材料。多孔炭电极在0.05 A/g时最大比容量高达255.5 m A·h/g,在电流密度为1 A/g时,放电比容量达到78 m A·h/g。经过12000次循环,容量保持率仍有72.4%,并且能量密度最高达到99.6 W·h/kg,展现出作为正极材料的巨大潜力。以煤沥青为原料制备的氮氧共掺杂多孔炭材料作为锌离子混合超级电容器的正极材料表现出了优异的电化学性能。     

Mo掺杂NiMnSe2的制备及其超级电容器性能

成分和结构是影响多元过渡金属硒化物电化学活性的关键因素。适当掺杂其他金属元素可以有效提高电极材料的电化学性能。通过简单的一步水热法,在泡沫镍上制备出了一种无黏结剂的Mo掺杂NiMnSe₂(记作Ni_0.8Mo_0.2MnSe₂)。Mo的少量掺杂为电极材料提供了丰富的反应活性位点,大大提高了NiMnSe₂的电化学性能。在1 A·g^-1时,Ni_0.8Mo_0.2MnSe₂的比容量达到1 404.0 F·g^-1。掺杂Mo显著降低了NiMnSe₂的电荷转移电阻和扩散电阻。组装的混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC (活性炭)比容量达到81.6 F·g^-1,且倍率性能优异。在2 A·g^-1下连续充放电10 000周,容量保持率为95.8%,表现出超高的循环稳定性。混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC在376.6 W·kg^-1的功率密度下,能量密度达25.5 Wh·kg^-1,高于NiMnSe₂//AC (17.3 Wh·kg^-1)。     

硼、氮共掺杂多孔碳的制备及其超电容性能

分别以含氮菲咯啉、四硼酸钾和醋酸锌为碳源、活化剂和模板,制备了B、N共掺杂多孔碳(BN-PC),并探究模板质量对BN-PC结构和储电性能的影响。当醋酸锌质量为5 g时,所得BN-PC₅中B、N杂原子含量分别为20.21%、18.29%。电化学测试结果表明,以6 mol·L^-1KOH为电解液,BN-PC₅电极展现出高的比电容(在0.05 A·g^-1电流密度下为255 F·g^-1)、优异的倍率性能(在20 A·g^-1电流密度下为188 F·g^-1)和卓越的循环稳定性(在5 A·g^-1的电流密度下循环10 000次比电容保持率为97%)。以3mol·L^-1ZnSO₄为电解液,在平均功率密度为56 W·kg^-1时,BN-PC₅电容器的能量密度可达27 Wh·kg^-1。     

超级微波消解-电感耦合等离子体发射光谱（ICP-OES）法测定土壤中18种元素

为提高土壤多元素同时检测的效率,采用超级微波消解-电感耦合等离子体发射光谱法测定土壤中钾、钠、钙、镁、铜、铁、锰、锌、磷、硫、硼、砷、镉、铬、铅、钴、镓、锂等18种元素含量。比较了超级微波消解、常规微波消解和电热板消解的处理效果,采用超级微波消解法对样品进行前处理,并优化了消解条件。在最优条件下,各元素的检出限在0.05~20 mg/kg,加标回收率在86.2%~107.5%,RSD在0.1%~3.0%,方法准确度及精密度可以满足多元素同时测定的需求,且该方法具有简单、快速、成本低、用酸量少、重现性好等特点。     

增敏剂改进超级微波消解-电感耦合等离子体质谱(ICP-MS)法测定食品中硒元素

合适比例增敏剂会对超级微波消解-电感耦合等离子体质谱法(ICP-MS)测定食品中硒元素含量具有一定的优化效果。本文采用超级微波消解仪对1.0 g食品样品进行全消解,采用碰撞池模式规避质谱干扰,内标校正非质谱干扰,选择甲醇、乙醇、乙酸、异丙醇、丙三醇作为增敏剂,并调整测试过程中的添加比例,用电感耦合等离子体质谱法测定。结果表明：2%异丙醇存在时硒元素各同位素响应值最高,其中78Se具有低至0.0003 mg·kg-1的方法检出限;用以上方法对食品标准物质（GSB-8、GSB-9、GSB-24、GSB-30）及实际样品进行分析,标准物质测定值均在其认定值及不确定度范围内,相对误差小于-5.4%;实际样品测定值的相对标准偏差（n=7,RSD）为0.3~1.7%,加标回收率为99.2~105%。本方法操作简便,精密度好,准确度高,可以作为各类食品样品中硒含量测试方法。     

超级微波消解－石墨炉原子吸收光谱法测定香菇中的镉

为建立一种快速批量检测香菇中镉的方法,建立了超级微波消解－石墨炉原子吸收光谱法测定香菇中镉含量的方法。分别采用湿法消解、普通微波消解和超级微波、传统微波和湿法消解技术前处理香菇标准物质样品,对比消解效果,优化超级微波消解技术的酸体系和消解最终温度。;采用石墨炉原子吸收光谱仪法测定,优化基体改进剂、灰化温度等工作参数,确定仪器最佳检测条件,验证分析方法的准确性和稳定性。结果表明,超级微波消解优于湿法消解和传统微波消解技术,准确性和重复性最佳,大幅减少用酸量的同时更加安全、高效,避免样品污染。在最优分析方法条件下,镉在0~4.0 μg/L范围内所得回归方程线性关系良好,相关系数(R)为0.9994,方法检出限为0.001 mg/kg,精密度RSD为1.4%~2.5%。超级微波消解－石墨炉原子吸收光谱法检测的探索与应用超级微波消解优于湿法消解和传统微波消解技术,大幅减少用酸量的同时更加安全、高效,避免样品污染,为农产品镉含量批量检测提供可靠的方法支撑。     

静电纺丝法制备交联多孔纳米碳纤维膜及其电化学电容性能

Cross-linked porous carbon nanofiber networks were successfully prepared by electrospinning followed by preoxidation and carbonization using low-cost melamine and polyacrylonitrile (PAN) as precursors. The structures and morphologies of the nanofiber networks were investigated using Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, and N₂ adsorption/desorption. The carbon fibers had an interconnected nanofibrous morphology with a well-developed porous structure including micropores, mesopores and macropores, high-level nitrogen doping (up to 14.3%), and a small average diameter (about 89 nm). Without activation, the carbon nanofibers had a high specific capacitance of 194 F·g^-1 at a current density of 0.05 A·g^-1. Cycling experiments showed that the specific capacitance retained approximately 99.2% of the initial capacitance after 1000 cycles at a current density of 2 A·g^-1, indicating an excellent electrochemical performance.