OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长，实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像，并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异，表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.     

OCS分子在128 nm附近的光解动力学研究：S(3PJ=2,1,0)、S(1D2)以及S(1S0)产物通道

本文利用时间切片离子成像技术对OCS分子进行了真空紫外波段的光解动力学研究. 在四个光解光波长(从129.32到126.08 nm)下测量了硫原子解离产物S(³P_J=2,1,0)、S(¹D₂)、S(¹S₀)的速度影像，并从中清晰地发现了四个主要的解离产物通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)，S(³P_J=2,1,0)+CO(A³π)，S(¹D₂)+CO(X¹Σ⁺)和S(¹S₀)+CO(X¹Σ⁺). 在实验影像中，产物CO分子的部分振动态结构能够得到分辨. 实验还获取解离产物总平动能谱，产物分支比和角分布. 对实验结果进行分析显示除绝热解离通道S(³P_J=2,1,0)+CO(A³π)之外，在其他三个产物通道中非绝热效应都起到非常重要的作用.     

真空紫外光电离质谱技术进展及其在快速分析中的应用

真空紫外光电离源(VUV-PI)是一种普适性的质谱软电离源,真空紫外光电离质谱谱图无碎片、易解析、灵敏度高,适合于在线快速分析。真空紫外光电离质谱根据分析对象不同可以直接采用单光子电离或添加掺杂剂实现化学电离,能实现气、液、固体分析,也可实现成像分析。该文介绍了真空紫外光电离源的电离原理、光源类型,分析了光电离质谱灵敏度的影响因素及其技术改进措施,并阐述了真空紫外光电离质谱技术在环境污染物、化工产物在线分析、国家安全分析以及生物医学分析中的相关应用研究。最后,总结了真空紫外光电离源的优缺点,并对真空紫外光电离技术在性能和应用方面的发展前景进行了展望。     

紫外光引发环氧树脂的下行前线聚合行为

采用紫外光(UV)引发法研究了221型脂环族环氧树脂的下行前线聚合行为.探讨了光引发剂、热引发剂用量和预热温度等对聚合前线的推动速率Vf和前线引发时间ti的影响,并利用傅里叶变换红外光谱(FTIR)、热重(TG)和差示扫描量热(DSC)等对固化物结构和热性能进行了表征.研究结果表明,提高光引发剂浓度、热引发剂浓度或预热温度,均可提高聚合前线的推动速率Vf,缩短引发时间ti.采用该技术制备的环氧树脂固化物具有较好的均一性及热稳定性.     

“神龙一号”轫致辐射靶设计

利用数值模拟方法,设计了"神龙一号"直线感应加速器的轫致辐射靶的靶材及结构。实验测量了钽叠靶所产生的X光照射量和X光焦斑,得到转换靶正前方1m处的X光照射量在0.103C/kg以上,产生的X光焦斑小于1.5mm,满足"神龙一号"轫致辐射靶的设计要求。     

高能X射线照相中降散射网栅失聚焦对图像的影响

通过理论分析,给出了网栅或光源横向偏离束轴、网栅或光源相对束轴有小角度倾斜、光源不在网栅聚焦点上等失聚焦照相条件下的直穿辐射损失率,计算了利用膜片堆叠制造网栅造成的影响。并通过蒙特卡罗数值模拟验证了理论分析结果。结果表明,网栅失聚焦或膜片堆叠制造的影响相当于网栅孔的尺寸减小,孔内其他位置的直穿辐射量保持不变。     

白光LED用近紫外光激发的蓝绿色荧光粉Sr5(PO4)3F∶Eu2+的光谱性能及助熔剂的影响

本文采用还原氛下的高温固相法合成了荧光粉Sr5(PO4)3F∶ Eu2+并对其性能进行了表征,同时研究了助熔剂硼酸对该荧光粉的影响.结果 表明:在1200℃还原氛下制得的荧光粉Sr5(PO4)3F∶ Eu2+,激发峰位于418 nm,发射峰位于524 nm,是能与近紫外光LED相匹配的蓝绿色荧光粉.Eu2的最佳掺杂浓度为15mo1;,对应的色坐标为(0.2871,0.4036).添加助熔剂H3BO3可以使荧光粉Sr5(PO4)3F∶Eu2+的合成温度由1200℃降低到1100℃,最佳掺杂浓度为5wt;,同时可以增加荧光粉的发光强度.     

Fabrication of large-scale ripples on fluorine-doped tin oxide films by femtosecond laser irradiation

The large-scale uniform self-organized ripples are fabricated on fluorine-doped tin oxide （FTO） coated glass by femtosecond laser. They can be smoothly linked in a horizontal line with the moving of XYZ stage by setting its velocity and the repetition rate of the laser. The ripple-to-ripple linking can also be realized through line-by-line scanning on a vertical level. The mechanism analysis shows that the seeding effect plays a key role in the linking of ripples.     

An optical study of the D-D neutron irradiation-induced defects in Co-and Cu-doped ZnO wafers

Room-temperature photoluminescence and optical transmittance spectroscopy of Co-doped(1×1014,5×1016,and 1×1017cm-2) and Cu-doped(5×1016cm-2) ZnO wafers irradiated by D-D neutrons(fluence of 2.9×1010 cm-2) have been investigated.After irradiation,the Co or Cu metal and oxide clusters in doped ZnO wafers are dissolved,and the wu¨rtzite structure of ZnO substrate for each sample remains unchanged and keeps in high c-axis preferential orientation.The degree of irradiation-induced crystal disorder reflected from the absorption band tail parameter(E0) is far greater for doped ZnO than the undoped one.Under the same doping concentration,the Cu-doped ZnO wafer has much higher irradiation-induced disorder than the Co-doped one.Photoluminescence measurements indicate that the introduction rate of both the zinc vacancy and the zinc interstitial is much higher for the doped ZnO wafer with a high doping level than the undoped one.In addition,both crystal lattice distortion and defect complexes are suggested to be formed in doped ZnO wafers.Consequently,the Co-or Cu-doped ZnO wafer(especially with a high doping level) exhibits very low radiation hardness compared with the undoped one,and the Cu-doped ZnO wafer is much less radiation-hard than the Co-doped one.     

An expedient one-pot synthesis of highly substituted imidazoles using supported ionic liquid-like phase（SILLP） as a green and effcient catalyst and evaluation of their anti-microbial activity

An effcient method for the synthesis of imidazole derivatives by a three-component condensation of benzil or 9,10-phenanthrenequinone,aldehydes and ammonium acetate using supported ionic liquidlike phase（SILLP）catalyst under ultrasonic irradiation or classical heating conditions is reported.The present methodology offers several advantages,such as excellent yields,simple procedures,short reaction times,simple work-up and mild conditions.The catalyst is easily separated from the products by fltration and also exhibits remarkable reusable activity.These highly substituted imidazoles were also evaluated for their anti-microbial activity.