Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上，采用电化学发光（ECL）和电化学阻抗（EIS）2种技术，协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明，DNA链中心位点的C-A单碱基错配稳定性低于链两端的，靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的，同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。     

改性纳米金富集-毛细管电泳电化学发光法测定水产品中4种氟喹诺酮类药物残留

建立了一种利用改性纳米金粒子富集与毛细管电泳-电化学发光(CE-ECL)法测定水产品中4种氟喹诺酮(环丙沙星、恩诺沙星、氧氟沙星、诺氟沙星)类药物残留的分析方法。实验考察了富集条件与CE分离条件,并基于增强Ru(bpy)23+电化学发光的原理,优化了ECL检测条件。结果表明,在最优条件下,经改性金纳米粒子富集后的4种分析物在0. 05～10. 0μmol/L浓度范围内,其峰高与浓度呈现良好的线性关系,检出限(S/N=3)可达0. 2μmol/L,4种目标物的富集倍数达104～127倍。该方法用于鳗鱼样品的分析,回收率为94. 5%～112%,相对标准偏差(RSD)均不大于6. 3%。     

氧化石墨烯/多壁碳纳米管负载金铂核壳纳米粒子构建一种三维新型抗坏血酸电化学传感器

该文采用涂覆的方式构建了一种用于灵敏检测抗坏血酸(AA)的电化学传感器。先将多壁碳纳米管(MWCNTs)和氧化石墨烯(GO)混合悬浮液修饰在玻碳电极(GCE)表面,修饰的GO可有效防止MWCNTs聚集,再将具有良好电催化性能的金铂核壳纳米粒子(Au@Pt NPs)修饰在GO/MWCNTs电极上,层层组装构建形成GO/MWCNTs/Au@Pt NPs/GCE三维新型抗坏血酸电化学传感器。该修饰电极在磷酸缓冲溶液中对AA显示了较宽的线性范围和极低的检出限,氧化峰电流与AA浓度在0.005～0.5μmol/L和0.5～1 000μmol/L范围内呈良好的线性关系,相关系数均为0.999,检出限(S/N=3)为4×10~(-9) mol/L,稀释人体血清样品的加标浓度为0.01、0.1、10μmol/L,回收率为90.9%～108%,相对标准偏差(RSD,n=3)为1.2%～2.8%。该修饰电极对AA具有良好的选择性,可有效排除多巴胺、尿酸、葡萄糖等生物小分子的干扰。方法简单、高效、灵敏,可用于临床实际检测。     

分子印迹电化学传感器检测水产品中孔雀石绿

以孔雀石绿(MG)为模板,以邻氨基酚为功能单体通过循环伏安法(CV)在玻碳电极表面上聚合制备了MG分子印迹电化学传感器,用CV法和差分脉冲法(DPV)研究了传感器的响应性能,并用于水产品中MG检测。结果表明,DPV峰电流减少量与MG浓度在0.02～0.5μg·mL~(-1)范围内呈线性关系,线性方程为ΔI(μA)=26.77C_(MG)+2.663;在0.5～2.5μg·mL~(-1)范围内呈线性关系,线性方程为ΔI(μA)=2.662C_(MG)+14.25,检出限为1.2×10~(-2)μg·mL~(-1)。MG分子印迹电化学传感器操作简单快捷,具有较好的特异性、重复性和稳定性,可满足水产品中MG的快速检测需要。     

2,6-二甲基-3,5-二(吡唑-3-基)吡啶/铜构筑的一维链状Keggin型杂多酸盐的合成、结构及电化学性质研究

以二水氯化铜(CuCl2·2H2O)、硅酸钠(Na2SiO3)、钼酸钠(Na2 MoO4)和2,6-二甲基-3,5-二(吡唑-3-基)吡啶(简写为H2L)为原料,通过水热反应,成功地合成了一个一维链状Keggin型多酸基杂化化合物[Cu2(H3L)2](SiMo12O40).通过X-射线单晶衍射、TGA、IR以及元素分析对该化合物的结构进行表征.测试结果表明,该化合物属于三斜晶系,P-1空间群,晶胞参数a=1.1689(5) nm,b=1.2157(5) nm,c=1.2233(5) nm,α=62.066(5)°,β=62.833(5)°,γ =74.789(5)°,V=1.363 8(10) nm3,Z=2,R1=0.082 4,wR2=0.174 5.电化学分析结果表明该化合物对亚硝酸盐的还原具有良好的电催化效果.     

锂离子电池TiO2纳米管负极材料

In recent years, TiO₂ has been widely investigated as a promising anode material for lithium ion batteries because of its low volume change during the charge/discharge process, environmental benignity, and high safety. However, it suffers from poor electron transport, slow ion diffusion, and low theoretical capacity (335 mAh·g^-1), which limit its practical application. In this paper, we review the development history and latest progress of TiO₂ nanotubes (TNTs) as anode materials. Three typical synthesis methods of TNTs, namely, hydrothermal method, anodic oxidation, and template method, are analyzed in detail. We explain the formation mechanism, compare the advantages and disadvantages of each method, and identify the factors influencing the formation of TNTs. We also carefully analyze the morphology and crystallography of TNTs and describe how they influence the electrochemical performance. It is pointed out that c-axis oriented, arrayed, unsealed TNTs with a wall thickness less than 5 nm show better electrochemical performance. Various approaches for improving the electrochemical performance of TNTs are summarized, including preparation of threedimensional (3D) structured electrodes, doping, coating, and synthesis of composites. Among these approaches, compositing with materials that have high capacity and high conductivity has proven to be effective, convenient, and controllable. The achievements and the problems associated with each approach are summarized, and the possible research directions and prospects of TNTs as anode materials for Li-ion batteries in the future are discussed.