荧光探针在氰化物分析中的研究进展

氰化物极易与细胞色素氧化酶键合,抑制电子转移、导致组织缺氧,从而显示较强的毒性。荧光化学传感器作为简易、灵敏且可视化的方法广泛应用于氰化物的检测。本文对荧光探针在氰化物检测中的应用进行综述,概述了氰化物的毒性机制和荧光探针对氰化物的响应机理。同时,本文总结了荧光探针在水体、食品和生物组织中对氰化物的检测及生物成像中的应用,并对荧光探针在结构设计中如何提高生物兼容性和靶向性等进行了展望,以期为光化学探针分子的设计及应用提供理论与研究依据。     

流动注射-分光光度法测定水中氰化物

使用流动注射(FIA)-分光光度法测定水中的氰化物的含量,并与传统分光光度法的分析结果进行比对。实验证明流动注射(FIA)-分光光度法操作简便、线性好,灵敏度、精密度、准确度都能符合分析工作要求。检出限为0.2μg/L,适用于水中微量氰化物的检测。分析频率为每小时30个样品,特别适合大批样品的测定。     

连续流动-分光光度法测定固体废物中氰化物浸出毒性的研究

建立了一种利用连续流动-分光光度法测定固废中氰化物的浸出毒性的方法,当氰化物浓度在0~200μg/L范围内,校准曲线的相关系数r为0.9998;方法的检出限可以达到0.33μg/L;不同浓度样品测定的相对标准偏差低于2.6%,实际固体废物样品加标回收率为96%~103%,方法精密度良好并且准确度较高;通过实际样品测定结果比对,证明方法与传统国家标准方法测定结果有着较高的吻合度,具有良好的应用前景。     

重要更正

本刊今年第2期发表的高铁酸钾去除微污染水源中氰化物的试验研究一文出现严重错误,其中第181页的图5与图6在排版时发生错排,现予更正为:     

Synthesis,Crystal Structure and MMCT Property of a New Mixed-valence Cyanide-bridged Binuclear Complex

A new mixed-valence cyanide-bridged complex, Br3Fe(μ-NC)RuBr(dppm)2(dppm = bis(diphenylphosphino)methane), was obtained through the reaction between trans-(dppm)2ClRuCN and FeBr3. Its crystal structure was characterized. Electronic absorption spectra indicate the existence of metal-to-metal charge transfer(MMCT) and this complex is Class Ⅱ mixed valence complexes according to the classification of Robin and Day. Magnetic analysis shows it is paramagnetic.     

铁氰化镧修饰电极的制备及表征

An electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate, lanthanum hexacyanoferrate (LaHCF), was prepared by electrochemical deposition on the surface of a glassy carbon electrode with a potential cycling procedure. The cyclic voltammogram of LaHCF exhibits a pair of well-defined redox peaks with the formal potential of 208 mV (vs. SCE) at a scan rate of 100 mV/s in 0.2 mol/L NaCl solution and the redox peak currents increase linearly with the square root of the scan rate up to 1000 mV/s. The effects of the concentration of supporting electrolyte on the electrochemical characteristics of LaHCF were studied by voltammetry. LaHCF was also characterizated by scanning electron microscope (SEM), FTIR and XPS techniques.     

双金属氰化络合物催化剂的形态及其对催化剂活性的影响

合成了多个基于钴氰化锌的双金属氰化络合物(DMC)催化剂,并对催化剂的结晶形态进行了表征.考察了制备过程中,有机配体及其引入方式,温度,搅拌速度对DMC催化剂形态的影响.其中有机配体对DMC催化剂形态的影响是最主要的.有机配体中富电子原子的电负性的强弱和数量共同影响着DMC催化剂的形态.该类原子的电负性越强,得到的DMC催化剂的结晶性越差,无定型部分的比例越高,并且单个原子的电负性强弱比该类原子的数量在此间的影响更大.而在有机配体预先存在的情况下,该沉淀体系则更有利于无定型部分的产生.在30℃左右的沉淀反应温度下,得到的DMC催化剂的无定型部分比例最高.在有机配体存在的情况下,搅拌速度对DMC催化剂形态的影响有限.并且发现存在于有机配体中的DMC催化剂随着时间的推移,形态会发生变化.初步揭示了DMC催化剂的形态与其催化活性间的关系.而无定型态的DMC催化剂更有利于PO的聚合.     

Moessbauer Investigation of the Ferromagnetic Coupling in Copper-Iron Polycyanides

One of the Prussian blue analogs, molecular magnet Cu3^Ⅲ [Fe^Ⅲ (CN)6]2.11.6H2 O, was investigated by Moessbauer spectroscopy. It was found that transition temperature was around Tc = 18.5 K from paramagnetic phase to ferromagnetic phase. The β value of the critical exponent is around 0.338 at magnetic ordering temperature.Therefore, the ferromagnetic coupling interaction of Cu-Fe cyanide could be clearly explained by spin wave theory.