微波辅助法制备氧化铜非酶葡萄糖传感器

采用微波辅助法制备了氧化铜(CuO)材料,其结晶度好,没有杂质,呈现片层堆叠而成的块状结构.以CuO材料修饰玻碳电极作为工作电极(CuO/GCE),饱和甘汞电极作为参比电极,铂丝电极作为对电极,在碱性条件下对葡萄糖溶液进行电化学性能检测.该传感器对520 nM到2.0 mM浓度范围内的葡萄糖溶液实现了优良的检测性能,灵敏度为2491.362μA·cm-2·mM-1,检测限为216 nM(S/N=3),在2 s内就可以完成反应.丙烯酸等物质对传感器的影响可以忽略,具有良好的抗干扰性.     

CoFe2O4/CuO活化过氧乙酸高效降解磺胺甲恶唑(英文)

利用化学沉淀法和溶胶凝胶法,通过两步法成功制备出含有尖晶石钴铁氧体和氧化铜的复合催化剂CoFe₂O₄/CuO,通过扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和X射线衍射(XRD)对制备出的CoFe₂O₄/CuO进行表征,探究不同高级氧化体系对磺胺甲恶唑(SMX)去除能力,考察过氧乙酸(PAA)浓度、催化剂投加量、水体中常见干扰物质(Cl^-,HCO-3,SO₄^2-,HA)和不同自由基捕获剂对SMX去除的影响。分析结果表明CoFe₂O₄/CuO同时具有CoFe₂O₄与CuO的特征,对比单独CoFe₂O₄与CuO,CoFe₂O₄/CuO对PAA展现出极高的活化性能,在最佳反应条件下(催化剂投加量=20mg·L^-1,c(PAA)=200μ...     

介孔Fe-Cu复合金属氧化物纳米粉催化剂催化低温CO氧化

以环氧丙烷为凝胶剂,采用简便低廉的无表面活性剂的溶胶-凝胶法制备了一系列不同Cu/Fe摩尔比的高比表面积介孔Fe-Cu复合氧化物纳米粉末。运用微反应器-色谱体系考察了它们在低温CO氧化反应中的催化性能。采用X射线衍射、N2吸附-脱附、热重-差热分析、程序升温还原、傅里叶变换红外光谱和透射电镜对所制样品进行了表征。结果表明,这些介孔Fe-Cu复合氧化物催化剂具有纳米晶结构、窄的孔径分布和高的比表面积,在低温CO氧化反应中表现出高的活性和稳定性。 CuO的添加影响了Fe2O3的结构和催化性能。当CuO含量为15 mol%时,催化剂具有最高的比表面积和催化活性,在低温CO氧化反应中表现出较高的催化稳定性。     

X射线荧光光谱法快速测定铜基催化剂中金属含量

本文使用X射线荧光光谱仪,采用人工制备标样,以粉末直接压片和经验系数校正基体效应的方法,建立了铜基催化剂中CuO、ZnO和Al2O3含量的快速测定方法。考察了样品厚度的影响及方法的精密度和准确度。该法待测元素线性范围较宽,分别为:CuO:13.0%~97.0%,ZnO:0~63.0%,Al2O3:0~25.0%,且相关系数均大于0.99。测定各元素的相对标准偏差均小于0.3%,且测定结果与化学滴定分析结果吻合。该方法快速、简便,可应用于工业生产质量监控。     

Current Efficiency,Corrosion and Structural Changes in SnO2-Sb2O3-CuO Inert Anodes for Aluminium Electrolysis

A systematic study was conducted on current efficiency （CE）, corrosion and structural changes in SnO2-based inert anodes （made of 96wt%SnO2＋2wt%Sb2O3＋2wt%CuO） on a laboratory Hall-Heroult aluminium cell. The influence of operating parameters and electrolyte composition on the CE and corrosion process were evaluated. The CE was found to be more than 90% and catastrophic corrosion took place at low percent of Al2O3, high percent of LiF, low cryolite ratio and high current densities. From all the structural changes that took place in the SnO2-based inert anodes, we assumed that the most important contribution was due to the migration of CuO towards the outer limits of the constituent grains of SnO2 based ceramic. The complex process occurred during the formation of various phases and their sintering ability both directly depended on Cu/Sb molar ratio.     

基于纳米氧化铜修饰的异戊巴比妥的新型电化学传感器的制备与应用

在纳米氧化铜修饰的玻碳电极表面电聚合一种能够快速检测尿液中异戊巴比妥(AMB)的分子印迹敏感膜,研究了该敏感膜的最佳成膜条件及最佳工作条件.通过扫描电子显微镜(SEM)、循环伏安(CV)和电化学交流阻抗法(EIS)研究了印迹膜的表面形貌及性能.电化学实验结果表明,纳米氧化铜能提高传感器对AMB的灵敏度.在最佳实验条件下,铁氰化钾分子探针的差分脉冲伏安(DPV)峰电流响应值与AMB的浓度在1.0×10-7~1.4×10-4mol/L范围内呈现良好的线性关系(线性相关系数R=0.9966);检出限为2.1×10-9mol/L(S/N=3).此印迹传感器可用于尿液中AMB的检测,加标回收率为94.00%~104.67%.     

Synthesis of N-substituted-2-aminobenzothiazoles using nano copper oxide as a recyclable catalyst under ligand-free conditions in reusable PEG-400 medium

A simple and practical method for the synthesis of N-substituted-2-aminobenzothiazoles via a crosscoupling reaction of 2-iodo anilines with isothiocyanates is envisaged using nano copper oxide as a recyclable catalyst and Cs2CO3as a base in PEG-400,as a bio-degradable,reusable,inexpensive and nontoxic reaction medium,under ligand-free conditions.The present tandem process underlines environmental acceptability to access a wide range of N-substituted-2-aminobenzothiazoles in good to excellent yields.     

助剂CuO和La2O3对NiO/α-Al2O3甲烷催化部分氧化制合成气引发过程的影响

采用分步浸渍法制备了NiO/α-Al₂O₃、NiO-CuO/α-Al₂O₃和NiO-La₂O₃/α-Al₂O₃三种催化剂,运用程序升温表面反应（TPSR）技术考察了助剂CuO和La₂O₃对NiO/α-Al₂O₃甲烷催化部分氧化（CPOM）反应引发过程的影响。结果表明,无论是否经过预还原处理,NiO/α-Al₂O₃催化剂在CH₄/O₂混合气氛下进行程序升温表面反应（CH₄/O₂-TPSR）时,即使升高到910℃也不能引发CPOM反应。添加助剂CuO或La₂O₃后,NiO-CuO/α-Al₂O₃和NiO-La₂O₃/α-Al₂O₃催化剂在CH₄/O₂-TPSR过程中均可以引发CPOM反应。原因分别是CuO促进了CH₄对NiO的还原以及抑制了O₂对Ni0的再氧化,La₂O₃减小了Ni晶粒粒径和还原时扩散阻力促进NiO的还原。     

Effect of CeO2 preparation method and Cu loading on CuO/CeO2 catalysts for methane combustion

CeO2 was synthesized by sol-gel, hydrothermal, nitrate thermal decomposition methods, respectively, and used as support to prepare CuO/CeO2 catalysts. According to characterization and reaction results, preparation method of CeO2 had a great influence on the physicochemical properties and activities of CuO/CeO2 catalysts. CuO with high dispersion and strong interaction with CeO2 was highly active in methane combustion, while CuO particles less associated with CeO2 showed less activity. The CuO catalyst supported on CeO2 which was prepared via nitrate thermal decomposition method showed the largest area, the smallest particle size, the highest dispersion of copper species and strong support metal interactions. Therefore, it presented the highest redox ability and activity for methane combustion. Activities of the catalysts with different copper content kept increasing until 5% Cu loading and from then on kept constant. Moreover, methane conversion decreased as methane space velocities increased on CuO/CeO2 catalyst. Addition of CO2 to the feed did not produce a significant effect on the catalytic activity, but the presence of H2O provoked a remarkable decrease on the activity of CuO/CeO2 catalyst.     

CuO纳米结构阵列的简易合成及其光催化性质

利用一种简便的一步反应路线, 通过调节反应温度, 选择性地合成出两种有序排列的氧化铜纳米阵列, 即成束的一维(1D)纳米带和紧密排列的二维(2D)纳米片. 系统研究了产物的物相和形貌随反应时间的演变情况, 结果表明两种氧化铜纳米结构阵列分别是通过氧化→生长→脱水和氧化→脱水→生长过程形成的, 其中动力学因素控制的成核与生长过程决定了氧化铜纳米结构的最终形貌. 模拟太阳光辐射光催化降解有机染料罗丹明B(RhB), 测试了所制备的氧化铜纳米结构阵列的光催化活性. 本工作为制备新颖的多级纳米结构材料提供了一种简单且经济的合成路线, 这些纳米材料将在多个领域体现出重要的应用潜力.