覆盖亚临界到临界区的制冷工质物性快速算法

为了在亚临界到临界点这个大范围内保证制冷剂物性计算的快速、稳定、可逆,提出将整个数据区间划分成若干个子区间分别进行隐式拟合,并且保证相邻子区间连接点处的连续与光滑,以及通过求分析解从隐式方程中得到显式物性计算式的方法.以美国国家标准局开发的程序REFPROP6.01的计算结果作为数据源,以R410A为例对该方法做了验证.得出快速物性计算公式的应用范围为饱和温度-60℃至临界温度,与NIST REFPROP 6.01的计算结果进行比较表明,计算速度快1500倍,平均相对偏差小于0.01%.     

基于矩阵初等变换的n元函数极值的快速判别法

给出了 n元函数极值的一个充分条件 ,并结合矩阵的初等变换建立了 n元函数极值的一种快速判别法 ,最后给出了一个例子     

Fast Optical Switching Using Oriented Cyanine Dye-Doped Nematic Liquid Crystal

A cyanine dye, 2-[7-（1,3-dihydro-1,3,3-trimethyl-2H-indol-2-ylidene）-1,3,5-heptatrienyl]-1,3,3-trimethyl-3H-indolium iodide （NK-125）, is doped in 4-cyano-4＇-pentylbiphenyl （5 CB）, and the mixture is sandwiched between two pieces of rubbed glass plates. The third-order nonlinear optical properties of the oriented NK-125-SCB layers are measured by the resonant femtosecond degenerate four-wave mixing （DFWM） technique at 760 nm. The third-order nonlinear optical susceptibility of one of the present samples is 5.5×10^-8 esu. The slow DFWM response of the NK-125-SCB layers due to a population grating is accelerated by the increasing laser power because of amplified spontaneous emission （ASE）. On the other hand, we do not observe a similar phenomenon for NK-125- polyethylene glycol （PEG-400）. Oriented NK-125 molecules in nematic liquid crystals must have very high ASE efficiency. Hence the population grating in a DFWM signal disappears within about 4 ps. It is expected that NK-125-SCB can be used as a material for very fast all-optical switching.     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

逻辑函数最大项展开式和CRM展开式的转换

在逻辑函数的CRM展开式和两种新运算基础上，对函数量大项展开系数和CRM展开系统(dj系数)之间的关系作了较详细的讨论，并提出了两者的矩阵转换法，快速转换法和直接代入转换法，具备较好的实用性．     

两两序列比对的一种新方法

本文研究DNA的两两序列比时,提出了基于快速沃尔什变换的新方法。经过计算模拟分析可知,比对的时间复杂度和空间复杂度明显降低.