混合/流体润滑状态下原位离子液体添加剂的摩擦学性能研究

本工作重点研究了混合/流体润滑状态下原位离子液体添加剂的摩擦学性能,选用聚乙二醇(PEG-400)作基础油,将双(三氟甲基磺酰)亚胺锂盐(Li TFSI)溶解在PEG中原位合成离子液体.利用微型牵引力试验机测量在室温、60和80℃以及不同滑滚比下摩擦系数随卷吸速度的变化,研究离子液体添加剂的有效性以及离子液体添加剂对PEG流变行为的影响.本研究中将为深入研究离子液体的润滑机理提供一种新的研究手段,对于指导设计新型离子液体润滑材料具有较为重要的意义.     

手机虹膜识别镜头设计

随着近年来图像传感器的快速商用化以及生物识别算法的发展，虹膜识别功能得以应用于移动终端设备。获取虹膜图像是虹膜识别的关键一步，运用ZEMAX光学设计软件设计了一款适用于手机的虹膜识别镜头。该镜头采用豪威科技公司OmniVision_OV2281传感器，采用三片式非球面光学塑料设计，F数为2.3，全视场角为34°，在1/2奈奎斯特频率220 lp/mm处MTF值均大于0.39，且系统总长仅3 mm。根据ZEMAX像质评价方法以及公差分析结果可知，该镜头各项光学指标优良，具有像质好、体积小，质量轻、价格低、容易加工等特点。     

四种次磷酸盐的合成

合成了次磷酸钙、次磷酸铁、次磷酸钡、次磷酸锌4种次磷酸盐，产率依次为94.7%、 98.1%、80.6%、 60.3%，粒径2~4 μm，其结构经SEM、 IR和电感耦合等离子体原子发射光谱(ICP)确证。      

添加剂和溶剂退火协同优化制备高性能厚膜有机太阳能电池

通过溶剂添加剂1-氯萘(CN)和二硫化碳(CS₂)溶剂退火(SVA)协同优化了基于窄带隙小分子受体的厚膜活性层形貌,揭示了该策略对共混膜形貌的调控机理,研究了其对活性层中的载流子动力学以及器件光伏性能的影响.结果表明,CN添加剂可以有效促进受体材料结晶聚集,CS₂溶剂退火能够进一步提升活性层材料分子堆积的有序性,同时优化给受体材料相分离尺寸,降低共混膜表面的粗糙度,实现了良好的纳米尺寸相分离形貌.基于CN+SVA处理的PM6∶Y6厚膜(300 nm)器件的电荷传输和复合性质得到改善,取得了15.23%的光电转换效率(PCE),显著高于未经处理(PCE=11.75%)和仅用CN处理(PCE=13.48%)的光伏器件.该策略具有良好的适用性,将基于PTQ10∶m-BTP-PhC6器件的光伏性能从13.22%提升至16.92%.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.     

高效液相色谱-电喷雾检测器法测定香精香料中甜蜜素的含量北大核心CSCD

香精香料是食品添加剂中的一个重要组成部分,由人工调配混合而成,其中含有2种或2种以上的香料,一般由天然提取香料、化学试剂、合成香料、甜味剂等多种成分构成[1]。随着香精香料使用范围的不断扩大,人们对香精香料质量控制等问题的关注度越来越高[2]。目前,为加强食品添加剂的规范生产经营,国家标准GB2760-2014《食品安全国家标准食品添加剂使用标准》对一些易滥用食品添加剂进行了严格的限量规定[3]。     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。