超薄屏蔽层300 V SOI LDMOS抗电离辐射总剂量仿真研究

本文研究了300 V绝缘体上硅横向双扩散金属氧化物半导体场效应管在电离辐射总剂量效应下的线性电流退化机理,提出了一种具有超薄屏蔽层的抗辐射结构实现线性电流加固.超薄屏蔽层位于器件场氧化层的下方,旨在阻止P型掺杂层表面发生反型,从而截断表面电流路径,有效抑制线性电流的退化.对于横向双扩散金属氧化物半导体场效应管,漂移区上的场氧化层中引入的空穴对线性电流的退化起着主导作用.本文基于器件工艺仿真软件,研究器件在辐照前后的电学特性,对超薄屏蔽层的长度、注入能量、横向间距进行优化,给出相应的剂量窗口,在电离辐射总剂量为0—500 krad(Si)的条件下,将最大线性电流增量从传统结构的447%缩减至10%以内,且辐照前后击穿电压均维持在300 V以上.     

发光铱(Ⅲ)配合物抗肿瘤活性研究及应用

铱(Ⅲ)配合物因其发光量子产率高且波长易调控、发光寿命长和光稳定性好的特点,在发光材料领域备受关注。铱(Ⅲ)配合物细胞渗透能力强,能靶向多种细胞组织并影响其结构和功能,表现出独特的抗肿瘤活性,是目前金属抗肿瘤药物特别是PDT光敏剂方向的研究热点。本文重点关注铱(Ⅲ)配合物的结构对其发光性能与抗肿瘤性能的影响,综述了近期铱(Ⅲ)配合物在生物成像、探针与传感、抗肿瘤诊疗等领域的研究进展,并对目前研究中存在的问题及其应用前景进行探讨和展望。     

热电制冷技术研究与应用

热电制冷技术是一种主要基于帕尔贴效应的新型制冷技术,由于其具有结构简单、制冷迅速、寿命长等优点,热电制冷技术受到了越来越多的关注。通过对国内外相关文献的研究,对热电制冷技术的原理进行了阐述,并对热电制冷的应用和性能优化两方面的发展进行了综述。     

四苯乙烯及其衍生物超声辅助合成与光电性能研究

四苯乙烯及其衍生物被广泛报道具有典型的聚集诱导发光(AIE)性能，在有机发光二极管、荧光离子探针、生物化学成像等诸多领域有着广阔的应用前景。以此为背景，可以将相关前沿议题转化为本科综合实验教学方案。本文针对现有的实验教学方案设计进行了探究和改进，在原有使用McMurry偶联反应制备四苯乙烯的实验方案基础上，利用生色团上不同取代基的推拉电子效应设计平行对照试验，合成溴代、甲氧基取代的四苯乙烯衍生物，实现了荧光发射光谱最大峰波长的显著移动，使得在紫外灯下即可观察到荧光从蓝色到黄绿色的变化。利用超声辅助合成的方法，成功将反应时间从原有的6–8 h压缩至2 h，使之更适应本科教学实验所需的时间空间。除光学性能表征外，本实验还综合了循环伏安法表征产物的能带结构。本实验针对原有方案进行了诸多改进，引入平行实验锻炼科学思维、别出心裁地引入超声辅助合成法，极大地缩短了反应时间，展现出较强的前沿性、绿色性和高效性。     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

氨基功能化磁性CoFe2O4/氧化石墨烯去除电镀废水中Cr(Ⅵ)的研究

使用改良的hummers法制备出的氧化石墨烯为载体,采用共沉淀法制备出磁性CoFe2O4/氧化石墨烯(MGO),再使用三乙烯四胺(TETA)对磁性CoFe2O4/氧化石墨烯进行氨基功能化,制备出氨基功能化磁性CoFe2O4/氧化石墨烯吸附剂.采用X-射线衍射仪(XRD)、傅里叶变换红外光谱仪(FT-IR)和扫描电子显微镜(SEM)对TETA-MGO的物相、化学组成和微观形貌进行表征,以TETA-MGO作为吸附剂去除电镀废水中Cr(Ⅵ),探讨吸附性能和吸附机理,分析TETA-MGO在外加磁场下的液固分离和再生吸附性能.结果表明纳米级立方尖晶石相磁性CoFe2O4均匀生长于氧化石墨烯的表面和片层之间,TETA通过C-N键与磁性氧化石墨烯(MGO)相连,氨基功能化成功,活性吸附位点增点.室温下,pH =2时吸附效果最佳,吸附120 min时达到吸附平衡,平衡吸附量约为48.66 mg·g-1,TETA-MGO对Cr(Ⅵ)的吸附动力学和吸附热力学可分别使用拟二级动力学模型和Langmuir等温吸附模型描述,吸附过程主要属于化学吸附控制的单分子层吸附,使用外加磁场可以对TETA-MGO实现简单的固液分离,TETA-MGO经过6次再生吸附后,对Cr(Ⅵ)的吸附量仅下降19.67;,说明具有良好的循环再生吸附能力.     

微波法制备CaMoO4:Tb3+,Eu3+白色荧光粉及其发光性能研究

通过微波法制备了CaMoO4:Tb3+,Eu3+白色荧光粉.采用X射线粉末衍射仪、扫描电子显微镜和荧光光谱仪对样品材料的结构、形貌和发光性能进行了表征.分别讨论了在不同助剂、不同反应浓度、不同反应温度及稀土离子Eu3+和Tb3+共掺比例变化对荧光粉的发光性能的影响.结果表明:不加活性剂所得CaMoO4:Tb3+,Eu3+样品在反应浓度为0.06 mol/L、反应温度为120℃时发光性能最好;通过调节CaMoO4:Tb3+,Eu3+荧光粉中稀土离子Eu3+和Tb3+共掺比例荧光粉的发光颜色可以很容易地从冷白光变为暖白光.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

炭吸附纳米氧化铋的制备及其光催化性能

以粗氧化铋和浓硝酸为原料,采用炭吸附共沉淀法制备氧化铋(Bi2 O3)纳米粉体.通过热重分析仪(TG-DTA)、X射线衍射仪(XRD)、紫外-可见分光光度计(UV-Vis)、透射电子显微镜(TEM)对得到的粉体的焙烧温度、物相、光吸收性能及微粒尺寸进行表征.结果显示:活性炭的加入有效阻止了纳米氧化铋在制备、干燥以及焙烧过程的团聚和烧结;在500℃煅烧制备的Bi2 O3粉体结晶度高、颗粒分布均匀,平均晶粒尺寸为10.8 nm,比表面积为86.43 m2·g-1;加入活性炭煅烧得到的Bi2 O3粉体在可见光区域吸收性能明显增强,对可见光有更好的吸收性能.评价纳米Bi2O3光催化活性是利用可见光光催化降解甲基橙(MO)目标污染物,60 min内甲基橙降解率达到91.77;.