首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   731篇
  免费   85篇
  国内免费   151篇
化学   503篇
晶体学   6篇
力学   76篇
综合类   4篇
数学   184篇
物理学   194篇
  2023年   32篇
  2022年   61篇
  2021年   44篇
  2020年   61篇
  2019年   47篇
  2018年   37篇
  2017年   41篇
  2016年   29篇
  2015年   63篇
  2014年   63篇
  2013年   68篇
  2012年   77篇
  2011年   81篇
  2010年   41篇
  2009年   37篇
  2008年   21篇
  2007年   37篇
  2006年   35篇
  2005年   16篇
  2004年   15篇
  2003年   4篇
  2002年   10篇
  2001年   4篇
  2000年   5篇
  1999年   3篇
  1998年   3篇
  1997年   6篇
  1996年   5篇
  1995年   8篇
  1994年   1篇
  1993年   6篇
  1991年   1篇
  1990年   1篇
  1987年   1篇
  1985年   2篇
  1936年   1篇
排序方式: 共有967条查询结果,搜索用时 46 毫秒
1.
针对三维非稳态对流扩散反应方程,构造了一种高精度紧致有限差分格式,对空间的离散采用四阶紧致差分方法,对时间的离散采用Taylor级数展开和余项修正技术,所提格式在时间上的精度为二阶、在空间上的精度为四阶。利用Fourier稳定性分析法证明了该格式是无条件稳定的。最后给出数值算例验证了理论结果。  相似文献   
2.
三唑类含能配合物在含能材料领域受到广泛关注。利用溶液法合成了一例含能配合物[Cd (Hatzc)2(H2O)](LH1),其中H2atzc=3-羧基-5-氨基-1,2,4-三唑,并用X射线单晶衍射、元素分析、红外光谱等手段进行表征。单晶结构分析结果表明LH1属于单斜晶系,空间群为P21/n,呈一维链状结构,通过氢键相互作用形成三维超分子结构。LH1的爆速(D=10.4 km·s-1)、爆压(p=55.2 GPa)、爆轰能量(16.51 kJ·g-1)和密度(2.363 g·cm-3)均优于大多数含能配合物。撞击感度(>40 J)和摩擦感度(>360 N)表明LH1对撞击和摩擦的敏感性较低。高氯酸铵(AP)的催化热分解结果表明,在LH1的催化作用下,AP的高温分解峰提前38℃,释放的热量在较短的时间增加0.46 kJ·g-1,说明LH1对AP热分解具有良好的催化效果。  相似文献   
3.
坝前淤泥面与新填筑坝体接触面是"坝前淤泥面加坝"技术的薄弱环节。为了探究不同工况下淤泥坝基、新填筑坝体,以及淤泥土-新填土接触面的剪切强度特性,以宁夏南部山区西吉县南川水库坝前淤泥面加坝工程为研究对象,通过常规应变式直剪仪、改进常规应变式直剪仪分别进行剪切试验,分析了淤泥土含水率和压实度变化时,淤泥土、新填土、淤泥土-新填土接触界面的抗剪强度、黏聚力、内摩擦角的变化规律。试验结果表明:新填土抗剪强度最大,不同工况下淤泥土-新填土接触界面的抗剪强度介于淤泥土和新填土的抗剪强度之间;淤泥土含水率在12%~16%之间存在最优含水率,超过该含水率后,淤泥土及淤泥土-新填土接触界面之间的抗剪强度均显著降低;当淤泥土含水率从8%增加至12%、16%时,黏聚力减小8%左右后迅速减小至22%,具有明显的阶段性,而淤泥土-新填土接触界面的黏聚力呈现先增加后减小的趋势;当含水率相同时,随着压实度的增加,淤泥土、淤泥土-新填土接触面的黏聚力、内摩擦角总体呈增大趋势。最后根据试验结果对"坝前淤泥面加坝"工法的工程应用提出了相关建议。  相似文献   
4.
The analytical infinite series solution of submicron particle transport in a circular tube bounded by a porous wall, such as a pinhole, is determined under the slip velocity boundary condition, and the solution is verified by using the experimental data in the previous studies for the specific cases. The results show that particle penetration rate increases with the increase of the porous parameter, the axial pressure drop, and the pinhole radius, whereas it decreases with increasing the pinhole length. The penetration rate of nano-particles are more sensitive to the variation of these parameters. However, the differences between the penetrations of particles ranging from 0.3 μm to 1 μm are not evident because the diffusion becomes weak gradually in this size range. In addition, a further comparison is performed between the analytical solution and the existing studies, and approximate expressions are presented for accurate calculation of particle penetration rate through pinholes appearing in porous materials including filter devices and masks.  相似文献   
5.
This work studies the macroscopic and microscopic behaviors of ellipsoids under triaxial tests using 3D discrete element method (DEM) simulation. To avoid the boundary effect, a novel stress servo-controlled periodic boundary condition is proposed to maintain the confining pressure of samples during testing. The shape features of ellipsoids are investigated, including the aspect ratio of elongated/oblate ellipsoids and the initial arrangement directions of ellipsoids. The macroscopic properties of ellipsoidal particle samples, such as the deviatoric stress, volumetric strain, internal friction angle, as well as dilatancy angles are explored. Elongated and oblate ellipsoids with varying aspect ratios are investigated for the occurrence of stick-slips. In addition, it is demonstrated that the initial arrangement direction has a significant impact on the coordination number and contact force chains. The corresponding anisotropy coefficients of the entire contact network are analyzed to probe the microscopic roots of macroscopic behavior.  相似文献   
6.
人教版高中教材《化学2》明确指出苯不能使酸性高锰酸钾溶液褪色。但在实验中多次发现苯与酸性高锰酸钾溶液混合后放置一段时间能够褪色。为探讨这一问题,设计了以光照或黑暗、加酸或不加酸为条件,利用紫外-可见分光光度计对放置不同时间后的混合液体进行测试,并对反应后生成的沉淀物进行XRD表征的实验方案。通过对实验数据的综合分析提出了苯与酸性高锰酸钾溶液褪色反应的可能反应机理。  相似文献   
7.
园区综合能源系统(Park integrated energy system,PIES)是满足用户多种用能需求的一种重要途径,但由于内部分布式能源机组出力具有不确定性,且与负荷在时间维度上存在一定的不匹配性,限制了能源利用效率和经济效益的提升.因此,本文首先在构建耦合热电的PIES的基础上,构建了多类型需求响应模型;其次,构建了考虑风光机组出力不确定性的以系统净收益、清洁能源弃能率为多目标函数的优化模型;然后,构建了"不确定性处理-多目标处理-单目标处理"的三阶段求解模型,最后,以V2G和需求响应为考虑条件,设计多情景.算例结果表明:V2G可以为清洁能源不稳定发电提供有效备用,在一定程度上提供清洁能源利用效率;引入电热需求响应,能够改变用户负荷,增加经济效益.  相似文献   
8.
朱鹏飞  尹晓荷  高新华  董国辉  徐景坤  王传义 《催化学报》2021,42(1):175-183,后插32-后插33
氧化锌作为一种半导体材料,具有合适的能带结构位置,高催化效率,低成本和环境可持续性,因而广泛用于光催化领域.然而,由于氧化锌的宽带隙,可见光吸收能力差以及光生电子-空穴对的快速复合,极大地影响了其光催化效率.通过引入氧空位调控光催化剂的结构被证明是一种可以改善光生载流子的分离,从而提高光催化性能的有效方法.本文以ZIF-8为前驱体,采用两步煅烧法合成了具有不同浓度氧空位分布的ZnO纳米光催化剂,通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、电子顺磁共振(EPR)、荧光光谱仪(PL)等手段系统地分析了合成的光催化剂的理化性质,并评价了它们在可见光下光催化氧化去除NO反应性能.EPR结果表明,样品中氧空位的浓度取决于温度处理的过程.通过两步煅烧法得到氧化锌中氧空位的含量高于一步直接煅烧法所得的样品.此外,随着煅烧温度升高,合成的氧化锌晶格越完好,其氧空位含量越少.UV-Vis DRS结果表明,两步煅烧法合成的ZnO与商业的ZnO及一步法直接煅烧合成的ZnO相比,其吸光范围从紫外光拓展到了可见光,表现出了更加优异的吸光性能.光催化反应结果表明,与商业氧化锌和一步直接煅烧法所得样品相比,两步煅烧法合成的样品表现出了更优异的光催化去除NO性能,并抑制了中间产物毒性NO2的产生,促进了NO的深度氧化.具体反应路径为:在光照过程中,光生电子很容易被氧空位俘获,与O2反应产生更多的超氧自由基(·O2^-),从而将NO氧化成最终的产物硝酸盐.尤其有趣的是,先在350 ℃煅烧2小时再400℃煅烧1小时的两步法样品Z 350-400的NO去除效率分别比一步法样品Z 400(400℃煅烧)和商用ZnO高出1.5和4.6倍.这表明以MOF材料衍生的具有适当量氧空位的金属氧化物为一种高效去除NO的光催化剂具有很好的应用前景.  相似文献   
9.
二氧化钒(VO2)作为一种长久以来备受关注的新型可逆相变材料,发展潜力巨大,其相变温度(TMIT)的调控一直是研究热点。本文主要利用锗离子作为掺杂离子探索其对VO2薄膜TMIT的影响,并尝试解释其内部作用机理。在约1 cm2大小抛光的氧化铝薄片上沉积了一系列含不同比例锗离子VO2薄膜。研究发现锗离子作为掺杂离子确实有利于TMIT的提高(本课题TMIT最大可达84.7 ℃)。TMIT提高的主要原因是锗离子的引入能够强化单斜态V-V二聚体的稳定性,进而增强单斜态的稳定性,使得低温单斜态向四方金红石态转变更加困难。  相似文献   
10.
We explored such issues as the formation mechanism, structure and propriety of the solid solutions of anthracene (ANT)–phenanthrene (PHE). Solution crystallization and solid-state grinding were employed to prepare solid solutions under different conditions. The thermal behavior and PXRD scanning results revealed the formation of discontinuous solid solutions, whose melting points and crystal lattices varied linearly with mixed ratio. Combing with Materials Studio, the formation possibility of solid solutions were investigated by evaluating the change of the energy. The crystal morphology of the solid solutions have a positive correlation with the change of the major part. Finally, the solution crystallization process of solid solution were studied using the population balance model.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号