首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   92篇
  免费   24篇
  国内免费   16篇
化学   57篇
晶体学   1篇
力学   11篇
数学   13篇
物理学   50篇
  2023年   2篇
  2022年   5篇
  2021年   6篇
  2020年   8篇
  2019年   5篇
  2018年   9篇
  2017年   8篇
  2016年   6篇
  2015年   10篇
  2014年   5篇
  2013年   4篇
  2012年   13篇
  2011年   6篇
  2010年   6篇
  2009年   11篇
  2008年   7篇
  2007年   4篇
  2006年   5篇
  2005年   2篇
  2004年   2篇
  2000年   2篇
  1999年   3篇
  1994年   2篇
  1957年   1篇
排序方式: 共有132条查询结果,搜索用时 15 毫秒
1.
本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。  相似文献   
2.
Mass concentration and isotopic values δ13C and 14C are presented for the water-insoluble refractory carbon(WIRC) component of total suspended particulates(TSP),collected weekly during 2003,as well as from October 2005 to May 2006 at the WMO-GAW Mt.Waliguan(WLG) site.The overall average WIRC mass concentration was(1183±120)ng/m3(n = 79),while seasonal averages were 2081 ±1707(spring),454±205(summer),650±411(autumn),and 1019±703(winter) ng/m3.Seasonal variations in WIRC mass concentrations were consistent with black carbon measurements from an aethalometer,although WIRC concentrations were typically higher,especially in winter and spring.The δ13C PDB value(-25.3 ± 0.8)%.determined for WIRC suggests that its sources are C3 biomass or fossil fuel combustion.No seasonal change in δ13C PDB was evident.The average percent Modern Carbon(pMC) for 14C in WIRC for winter and spring was(67.2 ± 7.7)%(n = 29).Lower pMC values were associated with air masses transported from the area east of WLG,while higher pMC values were associated with air masses from the Tibetan Plateau,southwest of WLG.Elevated pMC values with abnormally high mass concentrations of TSP and WIRC were measured during a dust storm event.  相似文献   
3.
A quantitative analysis of multiple components with a single‐marker method was established for the simultaneous determination of five sesqutiterpenoids in Xingnaojing injection. This method was established with Xingnaojing injection determined by high‐performance liquid chromatography coupled with diode array detection. The durability and system suitability of the established method were evaluated, and the reliable relative correction factors were obtained with curdione selected as an internal reference. The contents of the five components in all Xingnaojing injections were determined by external standard method and the contents of curcumenone, curcumenol, curzerenone, and germacrone were also calculated with the obtained relative correction factors. Then, relative error was investigated to estimate the difference of the two methods. As a result, the established new method possesses good adaptability, and there is no significant difference between the two methods, except for the content of curzerenone in eight samples. To put the established method into practice, the limits of quantitation of the established method of the five components were proposed and defined. Thus, the developed methodology can also be utilized to the quality evaluation of Xingnaojing injection, in spite of the difference found in the content of curzerenone between the external standard method and the newly established method.  相似文献   
4.
The sensitive and selective detection of nucleic acids is important for basic research and many applied fields. Herein, a novel green DEAB-TO-1 was designed and synthesized. DEAB-TO-1 shows significant fluorescence enhancement (800-fold) when bound to ctDNA and a distinct selectivity for dsDNA over RNA (5.9 times). Moreover, the limit of detection is 0.57 ng/mL. It is live-cell-permeant DNA intecalator, indicating a promising candidate for nucleus-specific imaging and a good counter-stain compatibility with other dyes.  相似文献   
5.
基于内聚力模型的高速水流聚脲基涂层剥离破坏模型研究   总被引:1,自引:1,他引:0  
冲磨和空蚀破坏是水利水电设施最为常见的病害之一,严重影响水利水电设施的安全运行和效益发挥. 泄洪建筑物通常喷涂聚脲基涂层来提高抗冲耐磨性能,但在泄洪高速水流速度作用下抗冲磨聚脲基涂层的剥离破坏机理的研究尚属空白. 本文基于高速水流的流态形式,提出了高速水流对泄洪建筑物的力学作用模型,水流作用对泄洪建筑物的载荷主要包括拖曳力、冲击力、脉动力和上浮力;采用内聚力模型表征聚脲基涂层与泄洪建筑物防护体界面的剥离破坏过程,建立了高速水流聚脲涂层的剥离破坏模型, 给出了模型的有限元形式方程、本构关系以及损伤起始原则、演化原则和接触碰撞模型. 通过聚脲涂层与混凝土基底的剥离破坏试验,分析了不同剥离倾角下界面剥离破坏的拉应力与倾角之间的变化规律,得到了聚脲涂层剥离破坏过程中应力-$\!$-位移变化关系. 根据剥离破坏试验计算了界面剥离破坏断裂模型参数,采用数值方法对模型进行了验证,试验结果与模型计算结果吻合良好,为泄洪建筑物的抗冲耐磨设计提供理论依据.   相似文献   
6.
Hydrothermal carbonaceous materials and MnO2 have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO2 loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO2/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO2/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO2/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.  相似文献   
7.
摘要:以过渡金属(Cu, Co)取代磷钨酸为模板剂,硫酸钛为钛源,通过一步模板法合成出一类多酸基PW11M(M=Cu、Co)@TiO2材料,采用FT-IR、XRD、XPS、Raman、SEM和TEM表征手段对材料进行了结构表征. 结果表明,PW11M(M=Cu、Co)被引入到TiO2中,形成了球形核壳结构. N2吸附-脱附测试表明,PW11Co@TiO2具有介孔结构:孔径大小为3.3 nm,比表面积为72.4 m2/g. 在以H2O2为氧化剂,乙腈为溶剂的氧化脱硫反应体系中考察了其催化活性,结果表明:复合材料PW11M(M=Cu、Co)@TiO2表现出良好的催化性能. 其中催化剂PW11Co@TiO2在投入量为40 mg,反应底物为500 ppm,反应温度60 oC,反应40 min后,DBT的脱硫率达到99.7%. 中断和循环实验表明,催化剂PW11Co@TiO2具有良好的稳定性,在相同的反应条件下,循环反应5次后,催化剂的催化活性没有明显下降.  相似文献   
8.
荧光纳米材料不但具备纳米材料的优势,同时还具有优异的光学性质,被广泛应用于荧光标记、离子识别、荧光免疫分析、光学成像和医学诊断等方面。因此,荧光纳米材料的制备、结构分析和荧光特性等方面的研究备受人们的关注。为了获得发光强度大、荧光量子效率高和制备过程可控的Si基荧光纳米材料,实验进一步研究了Si纳米线对样品发光特性的影响和样品的光学稳定性。首先,基于固-液-固生长机制,在反应温度为1 100 ℃、N2气流量为1 500 sccm、生长时间为15~60 min等工艺条件下,分别以“抛光”和“金字塔”织构表面的单晶Si(100)为衬底,生长出不同长度和分布的Si纳米线;以Au或Au-Al合金膜层作为金属催化剂,生长出密度分别约为108和1010 cm-2的Si纳米线;然后,利用L4514自动控温管式加热炉,基于高温固相法,在温度为1 100 ℃、掺杂时间为60 min和N2气流量为1 000 sccm等工艺条件下,以高纯Tb4O7(99.99%)粉末为稀土掺杂剂对不同Si纳米线衬底进行稀土掺杂,制备一系列的荧光纳米材料SiNWs:Tb3+样品;室温下利用Hitachi F-4600型荧光分光光度计,固定激发光波长为243 nm、激发光狭缝为2.5 nm、发射光狭缝为2.5 nm、扫描波长范围为450~650 nm、光电倍增管(photomultiplier lube, PMT)电压为600 V等参数下,测量了不同样品的光致发光特性;最后,实验测试了该荧光纳米材料的光学稳定性,如时间(0~30 d)、温度(300~500 K)、酸碱(pH 1和11)、抗光漂白(0~120 min)等稳定性以及水溶性和分散性。结果显示,在衬底为“金字塔”织构表面上、生长时间为30 min、以Au为金属催化剂等条件下制备的Si纳米线为Tb3+掺杂衬底时,SiNWs:Tb3+的绿光发射强度较大,其发光强峰值位于554 nm,属于能级5D47F5的跃迁,另外在波长为494,593和628 nm出现了三条发光谱带,它们分别属于能级5D4→7F6,5D4→7F4和5D4→7F3的跃迁。另外,样品展示出了优异的时间、温度、酸碱和抗光漂白等光学稳定性,同时还具有良好的水溶性和分散性。如温度升高到500 K时,光发射强度仅降低了约8.9%左右;抗光漂白能力较强,用波长为365 nm、功率为450 W的紫外光源照射120 min,样品的绿光发射强度无衰减;酸、碱稳定性好,在pH 1的强酸(HCl)溶液中120 min未见衰减,在pH 11的强碱(NaOH)溶液中15 min内衰减较小, 随后发光强度出现了缓慢下降的趋势;当60 min后,样品的发光强度变得极其微弱。分析认为,在SiNWs:Tb3+表面有一层SiO2包覆层,而NaOH溶液容易和SiO2发生化学反应,随着时间延长SiO2层被破坏,故样品发光强度降低;样品溶于水中放置30 d未见沉淀物,发光亮度均匀且分散性较好。在研究了制备温度、气体流量和掺杂时间等工艺条件之后,深入研究了Si纳米线自身变化对Tb3+绿光发射的影响。该材料展示出了良好的光学稳定性、水溶性和分散性,使其作为荧光标记物具有一定的应用价值。  相似文献   
9.
何英秋  丁东  彭涛  闫凤利  高亭 《物理学报》2018,67(6):60302-060302
目前,多光子纠缠态的制备大多通过线性光学器件演化自发参量下转换一阶激发过程产生的纠缠光子对得到.本文考虑由自发参量下转换源二阶激发产生四个不可区分的纠缠光子制备四光子超纠缠态的情况.通过几组分束器、半波片和偏振分束器等线性光学器件设计量子线路演化四光子系统,结合四模符合探测,可得到同时具有偏振纠缠和空间纠缠的四光子超纠缠态.  相似文献   
10.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号