Determination of the Enantiomeric Purity of l-Carnitine and Acetyl-l-Carnitine by Chiral Liquid Chromatography

A chiral liquid chromatographic method for determination of the enantiomeric purity of both l-carnitine and acetyl-l-carnitine is described. Separation of the enantiomers of dl-carnitine and acetyl-dl-carnitine was achieved on a commercial chiral column (Chiralcel OD-R) after derivatization with (alpha-bromo)methyl phenyl ketone. Introduction of this lipophilic UV chromophoric group to the carnitine and acetylcarnitine molecules improved their retention, resolution, and UV detection. The mobile phase was 74:26 (v/v) 0.5 mol L^-1 sodium perchlorate–acetonitrile, pH 3.8, and the flow rate was 0.4 mL min^-1. Detection was performed at 235 nm. The method is selective and reliable for determination of the enantiomeric purity of bulk drug substances l-carnitine and acetyl-l-carnitine.     

一阶导数光谱K系数法同时测定硝基酚钠三组分

研究和建立了同时测定硝基酚钠混合三组份的新方法——一阶导数光谱K系数法。确定了最佳实验条件和测定波长,方法简便、快速、准确。通过对动植物细胞赋活增进剂中邻硝基酚钠、对硝基酚钠、5-硝基愈创木酚钠三组份的直接测定,其相对误差小于2%,相对标准偏差小于3%,回收率为99～103%。     

Laplacian differential reconstruction of one in-line digital hologram

We introduced an easy approach to realize the Laplacian first-order and second-order differential of the object wave in transverse direction by use of one in-line digital hologram. It can be used for pinpoint the position of the objects.     

3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

Enhanced Expression of GCRV VP6 in CIK Cells by Relative Sequence Optimization

Efficient expression of target protein is one of strategies for gene therapy or vaccine design. Many studies showed that codon optimization could enhance the expression of target proteins. In this paper, a target sequence of about 1.26 kb encoding the major capsid protein VP6 of grass carp reovirus (GCRV) and an optimized counterpart were synthesized and inserted into vectors for expressing VP6. The final constructs (named as pcDV6G and pcDV6YG) were transfected in Ctenopharyngodon idellus kidney (CIK) cells. The fluorescence analysis and the Western blot results showed that the gene fragment was transfected and expressed in CIK cells successfully. Although the qRT-PCR results showed no difference at the messenger RNA (mRNA) levels between the different versions of vp6 in the indicated stages, the enzyme-linked immunosorbent assay (ELISA) results showed that the protein level of VP6 expressed by pcDV6YG was higher than that by pcDV6G in the indicated hours. Taken together, these results suggest that the enhanced expression of GCRV VP6 in CIK cells by relative sequence optimization may be a good choice for making DNA vaccine against GCRV.     

meso-四(4-甲氧基-3磺酸基苯)卟啉与环糊精超分子体系的研究

采用极谱法、紫外可见光谱法及荧光光谱法研究了水溶性卟啉T(4-Mop)PS4与α-CD、-βCD、γ-CD、Hp-β-CD及SBE--βCD 5种环糊精的相互作用,结果表明T(4-Mop)PS4分别与这5种环糊精形成了T(4-Mop)PS4-CD s超分子体系。此外,本研究还采用极谱法、紫外可见光谱法及荧光光谱法测定了T(4-Mop)PS4-CD s超分子体系的包结常数和包结比,比较了T(4-Mop)PS4与5种环糊精的包结能力,并由此推测了包结机理,为T(4-Mop)PS4卟啉、环糊精的进一步应用提供了理论信息。     

A wide dynamic range laser rangefinder with cm-level resolution based on AGC amplifier structure

A pulsed time-of-flight (TOF) laser rangefinder with a pulsed laser diode and an avalanche photo diode (APD) receiver is constructed and tested. Trigged by an avalanche transistor, the laser diode can emit a periodic pulse with rise time of ～2 ns. A new structure with auto gain control (AGC) circuits both in the pre-amplifier and the post-amplifier is presented. Through this technology, not only the dynamic range of the receiver is extended, but also the walk error of timing discriminators is reduced. Large measurement range from 5 m to 500 m is achieved without any cooperative target. The single-shot precision is 3 cm for the weakest signal. Compared with previous laser rangefinders, the complexity of this system is greatly simplified.     

Functionalizing nano-montmorillonites by modified with intumescent flame retardant: Preparation and application in polyurethane

The 2-(2-(5,5-dimethyl-1,3,2-dioxaphosphinyl-2-ylamino)ethy-amino)-N,N,N-triethyl-2-oxoethanaminium chloride (compound c) containing phosphorus-nitrogen structure was synthesized and characterized. A novel intumescent flame retardant, namely montmorillonite (MMT) by modified with compound c (c-MMT), was prepared by ion exchanging of the nanometer Na⁺-montmorillonite (Na-MMT) with compound c. Both FTIR and X-ray diffraction (XRD) indicated that compound c had intercalated with Na-MMT and exfoliated c-MMT/PU nanocomposites have obtained by in-situ polymerization. TEM results further support the formation of the exfoliated nanocomposites. The thermal stability and flammability of c-MMT/PU composites were investigated by thermogravimetric analysis (TGA) and cone calorimeter test respectively. The results showed that the addition of flame retardant c-MMT enhanced the thermal stability and flame retardancy of PU significantly. SEM results indicated that c-MMT can achieve better dispersion in the chars after combustion and the compact and dense intumescent char is formed for c-MMT/PU composites after combustion. It is found that the char structure plays an important role for c-MMT in PU resin. The thermal stability and flame retardancy of PU resin were also significantly improved by an addition of c-MMT in PU resin.     

Synthesis of Porous Carbon Nitride Nanobelts for Efficient Photocatalytic Reduction of CO2

Sustainable conversion of CO₂ to fuels using solar energy is highly attractive for fuel production. This work focuses on the synthesis of porous graphitic carbon nitride nanobelt catalyst (PN-g-C₃N₄) and its capability of photocatalytic CO₂ reduction. The surface area increased from 6.5 m²·g⁻¹ (graphitic carbon nitride, g-C₃N₄) to 32.94 m²·g⁻¹ (PN-g-C₃N₄). C≡N groups and vacant N_2C were introduced on the surface. PN-g-C₃N₄ possessed higher absorbability of visible light and excellent photocatalytic activity, which was 5.7 and 6.3 times of g-C₃N₄ under visible light and simulated sunlight illumination, respectively. The enhanced photocatalytic activity may be owing to the porous nanobelt structure, enhanced absorbability of visible light, and surface vacant N-sites. It is expected that PN-g-C₃N₄ would be a promising candidate for CO₂ photocatalytic conversion.