Fully Chemical Recyclable Poly(γ-butyrolactone)-based Copolymers with Tunable Structures and Properties

Chinese Journal of Polymer Science - The emerging chemical recyclable polymers, such as poly(γ-butyrolactone) (PGBL) and poly((R)-3,4-trans six-membered ring-fused GBL) (P((R)-M)), provide a...     

A New Quassinoid from Brucea javanica

Chemistry of Natural Compounds - A new quassinoid, dehydrobruceantinol B (1), was isolated from the seeds of Brucea javanica, together with two known compounds, bruceantinol (2) and bruceine A (3)....     

环加成反应、环合反应、电环化反应与环化反应的区别*

环加成反应、环合反应、电环化反应与环化反应都是合成有机环状化合物的成环反应,它们描述的反应类型完全不同。但是,它们却经常被误用或者混用。阐述了这4类反应的区别,希望能够从教学上明确这4类反应,从源头为将来的有机化学工作者建立起准确的概念。     

新型Cd(Ⅱ)-MOF的合成及对4-硝基苯胺的高效识别

采用新型1,3,5-三(1H-苯并[d]咪唑-2-基)苯(TBB)配体及2,5-二羟基对苯二甲酸(H₂dhtp)线性配体, 以Cd(Ⅱ)离子为中心节点, 构筑了具有新型拓扑结构(unj)的手性金属-有机框架材料[Cd(TBB)(dhtp) ](配合物1). 该配合物具有较强的光致发光性能, 可分散在溶液中荧光检测硝基配合物等污染物. 其中, 4-硝基苯胺对配合物1具有高效的荧光猝灭能力, 检测限可低至0.145 mg/L, 并具有较好的选择性.     

化学法改性煤沥青脱除苯并芘的研究

在管式反应器中采用苯甲酸、聚乙二醇、固体古马隆树脂（S）、液体古马隆树脂（L）为添加剂来降低煤沥青中有害物质苯并芘的含量，以期使得煤沥青可绿色化应用。采用紫外-可见分光光度计分析煤沥青中苯并芘含量。考察了反应温度、反应时间、添加剂添加量、催化剂等工艺条件对添加剂脱除煤沥青中苯并芘的影响。结果表明，不同工艺条件能降低煤沥青中苯并芘的含量。在优化条件下，不同添加剂对苯并芘脱除率由高到低依次为：液体古马隆树脂、聚乙二醇、苯甲酸和固体古马隆树脂。分析其反应机理，这与催化剂的酸性相关，发生亲电取代反应。结果表明，液体古马隆树脂（L）在催化剂存在下对煤沥青中苯并芘脱除率可达73.0%，显示了良好的应用前景。     

Facile Preparation and Properties of Crosslinked Copolyether Elastomers with 1,2,3-Triazole and Urethane Subunit via Click Polymerization

An azide terminated ethylene oxide-tetrahydrofuran copolymer with urethane segments (ATUPET) as a novel binder pre-polymer, has been prepared through ethylene oxide-tetrahydrofuran random copolymer (PET) end-capping modification via one-pot method. The structure characterization of the modifier has been analyzed by FTIR, ¹H NMR, ¹³C NMR and GPC. In comparison with PET, ATUPET has a slightly higher viscosity because it has additional hydrogen bonding interaction generated by the urethane in ATUPET. Triazole cross-linked elastomers based on ATUPET with various functional molar ratios were prepared using tripropargylamine as a curing agent and cross-linker. Mechanical properties indicate that the modulus E and tensile strength σ_b exhibit a parabolic dependence with the increase in R. At around the stoichiometric ratio, the modulus E and tensile strength σ_b reach a maximum and the elongation at break exhibit an acceptable value at the same time. Swelling tests demonstrate that the apparent cross-linking densities (N₀) have a maximum value at the stoichiometric ratio. Thermal analysis shows that the ATUPET prepolymer and its polytriazoles elastomers exhibit a satisfactory stability. The results demonstrated that ATUPET might be a promising polymeric binder for future propellant formulations especially in the field of isocyanate-free curing technology.     

A Dual‐Surface Amidoximated Halloysite Nanotube for High‐Efficiency Economical Uranium Extraction from Seawater

By chemical cross‐linking the amidoxime group onto dual‐surfaces of natural ore materials, namely halloysite nanotubes (HNTs), an efficient adsorbent, AO‐HNTs, is developed. AO‐HNTs show high uranium adsorption capacity of 456.24 mg g^?1 in 32 ppm uranium‐spiked simulated seawater. In natural seawater, AO‐HNTs reach the high uranium extraction capacity of 9.01 mg g^?1 after 30 days’ field test. The dual‐surface amidoximated hollow nanotubular AO‐HNTs exhibit more coordination active sites for uranium adsorption, which is attributed to the high and fast uranium adsorption capacity. Because of the stable natural ore structure, AO‐HNTs also show long service life. Benefiting from the low cost of HNTs, the cost for uranium extraction from seawater is close to the uranium price in the spot uranium market, suggesting that AO‐HNTs could be used for economical extraction of uranium from the oceans.