Pattern transition and regulation in a subthalamopallidal network under electromagnetic effect

Although the significant roles of magnetic induction and electromagnetic radiation in the neural system have been widely studied, their influence on Parkinson's disease (PD) has yet to be well explored. By virtue of the magnetic flux variable, this paper studies the transition of firing patterns induced by magnetic induction and the regulation effect of external magnetic radiation on the firing activities of the subthalamopallidal network in basal ganglia. We find: (i) The network reproduces five typical waveforms corresponding to the severity of symptoms: weak cluster, episodic, continuous cluster, episodic, and continuous wave. (ii) Magnetic induction is a double-edged sword for the treatment of PD. Although the increase of magnetic coefficient may lead the physiological firing activity to transfer to pathological firing activity, it also can regulate the pathological intensity firing activity with excessive β-band power transferring to the physiological firing pattern with weak β-band power. (iii) External magnetic radiation could inhibit continuous tremulous firing and β-band power of subthalamic nucleus (STN), which means the severity of symptoms weakened. Especially, the bi-parameter plane of the regulation region shows that a short pulse period of magnetic radiation and a medium level of pulse percentage can well regulate pathological oscillation. This work helps to understand the firing activity of the subthalamopallidal network under electromagnetic effect. It may also provide insights into the mechanisms behind the electromagnetic therapy of PD-related firing activity.     

Na原子链表面等离激元特性的含时密度泛函研究

本文用含时密度泛函理论研究了线性Na原子链的表面等离激元机理.主要在原子尺度下模拟计算了体系随着原子数增加及原子间距变化的集体激发过程.研究发现线性原子链有一个普遍的特性——存在一个纵模和两个横模.两个横模一般在实验上很难被观测到.纵模随着原子链长度增加,能量红移的同时,该纵模主峰的强度呈线性增长.随着原子个数的增加,端点模式(TE)开始蓝移,能量和偶极强度都逐渐趋向饱和.横模能量被劈裂的原因概括如下:(一)每个位置的电子受到的势不同,在两端的电子受到的势要比在中间的电子受到的势要高,因此两端的电荷积累也比中间多;(二)端点存在悬挂键,所以中间的电子-电子间相互作用与端点的不一样,这两方面又都与原子间距d有关.     

气相色谱法测定工业废气中氯化氰

建立了气相色谱法测定工业废气中的氯化氰含量的方法。采用PE GC580型气相色谱仪,电子俘获检测器,Rt–PlotQ色谱柱,采用外标法定量。氯化氰浓度在0.1～10 mol/mol范围内与峰面积呈良好的线性关系,相关系数大于0.999,9次重复测定结果的相对标准偏差小于4%,样品加标回收率为95%～104%。结果表明该方法简单、快速,测试结果准确可靠,满足废气中氯化氰含量的测试。     

一种合成4-羟基苯并香豆素的简便有效方法（英文）

1-萘酚(1a)或2-萘酚(1b)与米氏酸(2)在无溶剂条件下进行研磨反应,分别得到丙二酸单萘基酯3a和3b。然后在Eaton试剂(五氧化二磷+甲基磺酸)的作用下,反应温度为85℃的条件下,3a和3b发生分子内的环化反应,得到目标化合物4-羟基苯并[h]香豆素(4a)和4-羟基苯并[f]香豆素(4b),其收率分别为78%和75%,其结构均已通过波谱数据和元素分析得以表征确认。     

椭圆纳米盘中磁涡旋结构的方位角自旋波模式

本文针对坡莫合金椭圆形盘中的磁涡旋结构, 采用微磁学模拟与傅里叶分析相结合的技术研究了磁涡旋自旋波的本征激发模式. 通过沿样品短轴方向施加一面内方向的脉冲磁场, 观察到一系列方位角自旋波模式. 观察到的自旋波模式具有两重对称性, 可以通过C₂群理论来进行类型的划分. 此外, 自旋波模式的频率随着方位角指标的变化而线性增加. 模拟结果显示样品的平均交换能量密度明显的高于平均静磁能量密度; 局域交换能量密度主要集中在涡核初始位置, 而局域静磁能量密度主要分布在长轴附近. 交换作用对受限于铁磁薄膜椭圆盘中的单个涡旋态的能量要起主导作用, 从而导致方位角自旋波模式频率随着方位角指标的增加而增加.     

光纤光栅传感器对钢筋混凝土内部应变的测量及温度效应的研究

本文应用光纤光栅传感器实现了对钢筋混凝土试件内部应变的测量．试验不仅就应用光纤光栅进行混凝土结构内部应变测量的技术、工艺进行研究，还通过设计温度控制试验，考察了光纤光栅传感器的温度补偿问题，以及横向应变对测量结果的影响．     

基于相对即时密度的泡沫铝材料力学性能研究

通过对圆柱形泡沫铝试件进行静态压缩和冲击实验，考察了泡沫铝的初始密度、孔径和尺寸等因素对材料应力应变关系的影响，研究了基于相对即时密度的泡沫铝材料的塑性行为。实验所用泡沫铝试件包含四种尺寸，三种孔径及多种初始密度。实验结果表明，初始密度对泡沫铝的应力应变关系有着显著的影响，而其他因素，如孔径、试件尺寸等的影响较小。基于实验结果，提出了一种新的泡沫铝材料力学性能的描述方法，即用材料的相对即时密度与应力的关系来描述泡沫铝材料的塑性行为。该关系适用于静态和动态加载情况，只是两种情况下的参数不同。基于该方法，发现泡沫铝的塑性行为可以用单一的应力一相对即时密度关系描述，这一关系甚至不依赖于材料的初始密度，这将使泡沫铝材料塑性行为的描述大大简化。     

喷墨打印垂直有机光晶体管及其性能优化

通过旋涂透明源极并在其上采用喷墨打印的方式制备有源层及源漏电极,从而得到一种垂直结构光晶体管,并获得了较好的光电性能,其响应率为～1 500A/W,探测率可达1.6×10~(14) Jones。向有源层中掺杂一定比例的电子捕获材料PCBM,使有源层中光生空穴复合减小,光生电流增大,从而进一步提高其光探测性能。研究发现当掺杂5wt%电子捕获材料时,垂直结构光晶体管性能达到最优,响应率为～6 000A/W,探测率可达1.4×10~(15) Jones.     

CsSbSO4F2晶体的光学特性研究

通过溶液法合成了一种非中心结构长条状的CsSbSO₄F₂晶体.其晶体结构属于空间群Pna2₁,结构中[SbO₂F₂]与[SO₄]多面体共顶点连接形成了一维链状结构,Cs⁺填充在长链之间维持电荷平衡.利用Kurtz-Perry方法对晶体进行粉末倍频测试,表明CsSbSO₄F₂属于可相位匹配的物质,其倍频效应约为KH₂PO₄的0.65倍.紫外-可见光-近红外漫反射光谱显示,该物质的截止波长为233 nm.光学性能测试表明,CsSbSO₄F₂在紫外区域有潜在应用.     

First principles study of ceramic materials (IVB group carbides) under ultrafast laser irradiation

Group IVB carbides have been applied in extreme aerospace environments as hard ceramic coatings; ZrC is being considered as a replacement for SiC in nuclear reactors. Therefore, a thorough understanding of the laser irradiation response of group IVB carbides is of clear significance. However, the existing knowledge on the fundamental properties of IVB group carbides is limited and insufficient with regard to both irradiated and non-irradiated characteristics. We investigate the effect of ultrafast laser irradiation on the lattice stability of ceramic materials(IVB group carbides) using the density functional perturbation theory(DFPT). The calculated phonon frequencies of TiC and ZrC at the ground state are in good agreement with previous calculations and experimental values. The phonon frequencies of IVB group carbides are positive, even though the electronic temperature reached 5 eV. Thus, IVB group carbides are more stable under ultrafast laser irradiation, which has greater benefits in nuclear and aeronautical applications compared to metals(W,Na), semimetals(Bi),and semiconductors(Si,SiC). The thermodynamic properties of ZrC are calculated as functions of their lattice temperature at different electronic temperatures. The elastic shear constants of IVB group carbides satisfy the Born stability criteria at Te = 5 eV. In addition, a comparison of the predicted melting temperatures of IVB group carbides, reveal that HfC is better suited for extreme high-temperature environments.