Size effect of Si particles on the electrochemical performances of Si/C composite anodes

A series of Si/C composites were fabricated based on pitch and Si powders with particle sizes of 30, 100, 500, and3000 nm. The size effects of the Si particles in the Si/C composites were investigated for lithium-ion battery anodes. The nanoscale Si and Si/C composites exhibited good capacity retentions. Scanning electron microscopy showed that exterior and interior cracks emerging owing to volume expansion as well as parasitic reactions with the electrolyte could well explain the performance failure.     

锂电池原位与非原位表征技术研究

锂电池的电化学性能与电子及离子在体相与界面的输运、反应、储存行为有关. 从原子尺度到宏观尺度,对电池材料在平衡态与非平衡态过程的电子结构、晶体结构、微观形貌、化学组成、物理性质的演化研究对于理解锂离子电池中各类构效关系至关重要,这需要综合多种原位与非原位表征技术. 目前,基础研究处于前沿的发达国家在这些方面取得了卓有成效的进展. 本文简介了中国科学院物理研究所近年来通过国内外合作,采用原位X射线衍射（in-situ XRD）、原位X射线吸收谱（in-situ XAS）、准原位/原位扫描电镜（quasi/in-situ SEM）、球差校正扫描透射电镜（HAADF/ABF-STEM）、扫描力曲线（Force-Curve）、中子衍射（Neutron Diffraction）、热重-差示扫描量热-质谱联用（TG-DSC-MS）、表面增强拉曼（SERS）等技术研究锂离子电池电极材料结构演化方面的进展,并对未来锂离子电池研究中先进表征技术的发展进行了简要的探讨.     

Gas treatment protection of metallic lithium anode

The effects of different coating layers on lithium metal anode formed by reacting with different controlled atmospheres(argon,CO_2–O_2(2:1),N_2,and CO_2–O_2–N_2(2:1:3))have been investigated.The obtained XRD,second ion mass spectroscopy(SIMS),and scanning probe microscope(SPM)results demonstrate the formation of coating layers composed of Li_2CO_3,Li_3N,and the mixture of them on lithium tablets,respectively.The Li/Li symmetrical cell and Li/S cell are assembled to prove the advantages of the protected lithium tablet on electrochemical performance.The comparison of SEM and SIMS characterizations before/after cycles clarifies that an SEI-like composition formed on the lithium tablets could modulate the interfacial stabilization between the lithium foil and the ether electrolyte.     

Influence of fluoroethylene carbonate on the solid electrolyte interphase of silicon anode for Li-ion batteries:A scanning force spectroscopy study

Silicon is an important high capacity anode material for the next generation Li-ion batteries.The electrochemical performances of the Si anode are influenced strongly by the properties of the solid electrolyte interphase(SEI).It is well known that the addition of flouroethylene carbonate(FEC)in the carbonate electrolyte is helpful to improve the cyclic performance of the Si anode.The possible origin is suggested to relate to the modification of the SEI.However,detailed information is still absent.In this work,the structural and mechanical properties of the SEI on Si thin film anode in the ethylene-carbonate-based(EC-based)and FEC-based electrolytes at different discharging and charging states have been investigated using a scanning atomic force microscopy force spectroscopy(AFMFS)method.Single-layered,double-layered,and multi-layered SEI structures with various Young’s moduli have been visualized three dimensionally at nanoscale based on the hundreds of force curves in certain scanned area.The coverage of the SEI can be obtained quantitatively from the two-dimensional(2D)project plots.The related analysis indicates that more soft SEI layers are covered on the Si anode,and this could explain the benefits of the FEC additive.     

纯相Li_2MnO_3薄膜的制备及作为锂离子电池正极材料的电化学行为

采用固相烧结法制备了纯相Li2MnO3正极材料及靶材,采用脉冲激光沉积(PLD)法在氧气气氛、不同温度下沉积了Li2MnO3薄膜.通过X射线衍射(XRD)和拉曼(Raman)光谱表征了薄膜的晶体结构,采用扫描电镜(SEM)观察薄膜形貌及厚度,利用电化学手段测试了Li2MnO3薄膜作为锂离子电池正极材料性能.结果表明,PLD方法制备的纯相Li2MnO3薄膜随着沉积温度升高薄膜结晶性变好.25℃沉积的薄膜难以可逆充放电,400℃沉积的薄膜具有较高的电化学活性和循环稳定性.相对于粉末材料,400与600℃制备的Li2MnO3薄膜电极平均放电电位随着循环次数的衰减速率明显低于相应的粉体材料.     

纯相Li2MnO3薄膜的制备及作为锂离子电池正极材料的电化学行为

采用固相烧结法制备了纯相Li₂MnO₃正极材料及靶材,采用脉冲激光沉积（PLD）法在氧气气氛、不同温度下沉积了Li₂MnO₃薄膜. 通过X射线衍射（XRD）和拉曼（Raman）光谱表征了薄膜的晶体结构,采用扫描电镜（SEM）观察薄膜形貌及厚度,利用电化学手段测试了Li₂MnO₃薄膜作为锂离子电池正极材料性能. 结果表明,PLD 方法制备的纯相Li₂MnO₃薄膜随着沉积温度升高薄膜结晶性变好. 25 ℃沉积的薄膜难以可逆充放电,400 ℃沉积的薄膜具有较高的电化学活性和循环稳定性. 相对于粉末材料,400与600 ℃制备的Li₂MnO₃薄膜电极平均放电电位随着循环次数的衰减速率明显低于相应的粉体材料.     

Silicon micropillar electrodes of lithiumion batteries used for characterizing electrolyte additives

The <100> crystal-oriented silicon micropillar array platforms were prepared by microfabrication processes for the purpose of electrolyte additive identification. The silicon micropillar array platform was used for the study of fluorinated vinyl carbonate (FEC), vinyl ethylene carbonate (VEC), ethylene sulfite (ES), and vinyl carbonate (VC) electrolyte additives in the LiPF₆ dissolved in a mixture of ethylene carbonate and diethyl carbonate electrolyte system using charge/discharge cycles, electrochemical impedance spectroscopy, cyclic voltammetry, scanning electron microscopy, and x-ray photoelectron spectroscopy. The results show that the silicon pillar morphology displays cross-shaped expansion after lithiation/delithiation, the inorganic lithium salt keeps the silicon pillar morphology intact, and the organic lithium salt content promotes a rougher silicon pillar surface. The presence of poly-(VC) components on the surface of FEC and VC electrodes allows the silicon pillar to accommodate greater volume expansion while remaining intact. This work provides a standard, fast, and effective test method for the performance analysis of electrolyte additives and provides guidance for the development of new electrolyte additives.     

A low cost composite quasi-solid electrolyte of LATP,TEGDME,and LiTFSI for rechargeable lithium batteries

The composite quasi solid state electrolytes(CQSE) is firstly synthesized with quasi solid state electrolytes(QSE) and lithium-ion-conducting material Li_(1.4)Al_(0.4)Ti_(1.6)(PO_4)_3(LATP), and the QSE consists of [LiG4][TFSI] with fumed silica nanoparticles. Compared with LATP, CQSE greatly improves the interface conductance of solid electrolytes. In addition,it has lower liquid volume relative to QSE. Although the liquid volume fraction of CQSE is droped to 60%, its conductivity can also reach 1.39 × 10~(-4)S/cm at 20℃. Linear sweep voltammetry(LSV) is conducted on each composite electrolyte.The results show the possibility that CQSE has superior electrochemical stability up to 5.0 V versus Li/Li+. TG curves also show that composite electrolytes have higher thermal stability. In addition, the performance of Li/QSE/Li Mn_2O_4 and Li/CQSE/Li Mn_2O_4 batteries is evaluated and shows good electrochemical characteristics at 60℃.     

锂电池失效分析与研究进展

锂电池在使用或储存过程中会出现一定概率的失效,包括容量衰减(跳水)、循环寿命短、内阻增大、电压异常、析锂、产气、漏液、短路、变形、热失控等,严重降低了锂电池的使用性能、一致性、可靠性、安全性.对锂电池失效进行准确诊断并探究其失效机理是锂电池失效分析的主要任务,对锂电池性能提升和技术发展具有深远意义.为了全面且深入地介绍锂电池失效分析,本文从锂电池失效分析的定义、失效表现、失效原因、分析内容、分析流程、困难点等方面进行了简述,希望能为推动中国锂电池失效分析技术的发展起到积极作用.     

力曲线用于硅负极材料表面膜的研究

利用原子力显微镜（AFM）力曲线模式来研究锂离子电池硅负极材料在含碳酸亚乙烯酯添加剂（VC）电解质首周循环时固态电解质相表面膜（SEI膜）的三维结构. 测试表明SEI膜具有多层结构,同时得到SEI膜厚度、杨氏模量以及覆盖度在首周循环过程中的变化,采用三维图呈现了硅材料表面膜的分布.