Relationship between the spatial position of the seed and growth mode for single-crystal diamond grown with an enclosed-type holder

The relationship between the spatial position of the diamond seed and growth mode is investigated with an enclosed-type holder for single-crystal diamond growth using the microwave plasma chemical vapor deposition epitaxial method. The results demonstrate that there are three main regions by varying the spatial position of the seed. Due to the plasma concentration occurring at the seed edge, a larger depth is beneficial to transfer the plasma to the holder surface and suppress the polycrystalline diamond rim around the seed edge. However, the plasma density at the edge decreases drastically when the depth is too large, resulting in the growth of a vicinal grain plane and the reduction of surface area. By adopting an appropriate spatial location, the size of single-crystal diamond can be increased from 7 mm × 7 mm × 0.35 mm to 8.6 mm × 8.6 mm × 2.8 mm without the polycrystalline diamond rim.     

分子晶体的高压Raman光谱及结构相变

 本文综合我们从NH₃F（氟化胺）、HCCl₃（氯仿）、HCBr₃（溴仿）、S₈（硫）和C₃N₆H₆（三聚氰胺）等分子晶体获得的高压Raman光谱数据，讨论了分子晶体Raman光谱的谱带强度，频率位移，晶场劈裂和Grüneisen常数等对压力的依赖关系。总结了分子晶体压致结构相变的光谱证据和高压新相结构确定的几种方法。     

直流电弧自催化合成β-SiC纳米线

采用C,Si和SiO₂为反应原料,利用直流电弧法制备出长直的β-SiC纳米线。纳米线的直径为100～200 nm,长度为10～20 μm,并且沿着<111>方向生长。通过X射线衍射(XRD)、扫描电子显微术(SEM)、透射电子显微术(TEM)、拉曼光谱等手段,对β-SiC纳米线进行表征。探讨了β-SiC纳米线自催化气-液-固(VLS)生长机制。     

High Thermoelectric Properties of PbTe Doped with Bi2Te3 and Sb2Te3

The composition-dependent thermoelectric properties of lead telluride (PbTe) doped with bismuth telluride (Bi2Te3), antimony telluride (Sb2Te3) and (BiSb)2Te3 have been studied at room temperature. All the sampies exhibit small thermal conductivity. The figures of merit, 7.63, 1.03 and 8.97 x 10-4, have been obtained in PbTe with these dopants, respectively. These values are several times higher than those of PbTe containing other dopants with small grain sizes. The high thermoelectric performance is explained by electronic topological transition induced by alloying. The results indicate that these dopants are effective to enhance the thermoelectric performance of PbTe.     

Effects of High Pressure on BC3

High-pressure phases of BC3 are studied within the local density approximation under the density functional theory framework. When the pressure reaches 20 GPa, the layered BC3 that is a semiconductor at ambient pressure, becomes metallic. As the pressure increases, the material changes into a network structure at about 35 GPa. To understand the mechanism of phase transitions, band structure and density of states are discussed. With the increase of pressure, the width of bands broadens and the dispersion of bands enlarges. Additionally, the density of states of the network bears great resemblance to that of diamond. Formation of the sp3 bonding in the network is the main reason for the structural transformation at 35 GPa.     

Effects of high pressure on the Raman and fluorescence emission spectra of two novel 1,3,4-oxadiazole derivatives

The effects of pressure on the fluorescence emission and Raman spectra of 1,4-bis[（4-methyloxyphenyl）-1,3,4-oxadiazolyl]- 2,5-bisheptyloxyphenylene （OXD-2） and on the fluorescence emission spectra of 1,4-bis[（4-methylphenyl）- 1,3,4-oxadiazolyl]phenylene （OXD-1） are investigated using a diamond anvil cell. With the increase of pressure, the intensity of the fluorescence emission increases and reaches maxima at 13GPa for OXD-1 and at 9.6GPa for OXD-2. The effect of pressure on the peak position of the emission shows a similar trend, red shift with the increase of pressure. But at higher pressures, the intensity of emission drops down dramatically. The Raman spectra of OXD-2 indicate that there appears a structural change at ca 3GPa.     

强流脉冲电子束应力诱发的微观结构

利用强流脉冲电子束装置在各种工艺条件下对奥氏体不锈钢、单晶铝及多晶铝等面心立方金属进行辐照处理.利用扫描电子显微镜和透射电子显微镜等详细分析了辐照样品的变形组织与结构.通过分析，在一定程度上建立起强流脉冲电子束诱发的应力特征与变形结构之间的关系，并对目前现有的几种应力波数值模拟结果进行了分析.实验结果表明，强流脉冲电子束能够在材料内部诱发10²—10³MPa的应力，其传播方式与材料的 晶体结构关系密切.这一应力是导致材料深层性能与微观组织结构发生变化的根源所在. 关键词： 强流脉冲电子束 应力 微观结构 变形     

非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

Structural Phase Transformations of ZnS Nanocrystalline Under High Pressure

In-situ energy dispersive x-ray diffraction on ZnS nanocrystalline was carried out under high pressure by using a diamond anvil cell. Phase transition of wurtzite of 10nm ZnS to rocksalt occurred at 16.0GPa, which was higher than that of the bulk materials. The structures of ZnS nanocrystalline at different pressures were built by using materials studio and the bulk modulus, and the pressure derivative of ZnS nanocrystalline were derived by fitting the equation of Birch-Murnaghan. The resulting modulus was higher than that of the corresponding bulk material, which indicates that the nanomaterial has higher hardness than its bulk materials.     

顽火辉石的高温高压同步辐射研究

 采用同步辐射能量色散X射线衍射技术、激光加热技术和金刚石对顶砧（DAC）高压装置，在温度为2 000 K和压力为23 GPa的范围内，对采自地幔二辉橄榄岩中的顽火斜方辉石，进行了原位的高温高压能量色散X射线衍射（EDXRD）测量。实验结果表明：当压力为15.3 GPa、温度为1 600 K时（相当于地球内部410 km处的地震波不连续界面的温压环境），顽火斜方辉石转变为橄榄石的β相——瓦兹利石（Wadsleyite）相；继续加温加压至2 000 K、23 GPa时（相当于地球内部670 km处的地震波不连续界面的温压环境），顽火斜方辉石相变为钛铁矿（Ilmenite）结构和钙钛矿（Perovskite）结构的混和相。实验结果进一步证明，在地幔中存在的两个地震波不连续界面是由橄榄石、顽火斜方辉石等矿物的相变引起的。