A density-functional theory investigation on desorption of O2 on Sn（111） and its comparison with initial oxidation on the X（111） （X=Si,Ge, Sn,Pb） surfaces

<正>The first-principles calculations are performed to investigate the adsorption of O₂ molecules on an Sn（111） 2×2 surface.The chemisorbed adsorption precursor states for O₂ are identified to be along the parallel and vertical channels, and the surface reconstructions of Sn（lll） induced by oxygen adsorption are studied.Based on this,the adsorption behaviours of O₂ on X（111）（X=Si,Ge,Sn,Pb） surfaces are analysed,and the most stable adsorption channels of O₂ on X（111）（X=Si,Ge,Sn,Pb） are identified.The surface reconstructions and electron distributions along the most stable adsorption channels are discussed and compared.The results show that the O₂ adsorption ability declines gradually and the amount of charge transferred decreases with the enhancement of metallicity.     

碳纳米管固相微萃取涂层吸附性能研究

利用空气氧化和稀酸回流纯化单壁碳纳米管,用高分辨透射电镜、拉曼光谱对碳纳米管进行了表征.在分子模拟中,非极性氢气、甲烷分子采用单点Lennard-Jones球形分子模型,流体分子与C原子之间相互作用采用虚拟原子模型.以液氮温度下碳纳米管对氮气的吸附等温线实验数据为依据,利用巨正则蒙特卡罗方法模拟得到了碳纳米管的孔径分布,主要集中在6nm.计算了常温常压下碳纳米管中甲烷及氢气的吸附等温线,298K及0.1MPa压力下,氢气的吸附量达到0.015%(质量分数),甲烷在样品中的吸附量可以达到0.5%(质量分数).模拟研究结果表明碳纳米管可以用作固相微萃取涂层材料.     

First-principles study of the elastic and thermodynamic properties of thorium hydrides at high pressure

The high pressure behaviors of Th_4H_(15) and ThH_2 are investigated by using the first-principles calculations based on the density functional theory(DFT). From the energy–volume relations, the bct phase of ThH_2 is more stable than the fcc phase at ambient conditions. At high pressure, the bct ThH_2 and bcc Th_4H(15) phases are more brittle than they are at ambient pressure from the calculated elastic constants and the Poisson ratio. The thermodynamic stability of the bct phase ThH_2 is determined from the calculated phonon dispersion. In the pressure domain of interest, the phonon dispersions of bcc Th_4H(15) and bct ThH_2 are positive, indicating the dynamical stability of these two phases, while the fcc ThH_2 is unstable. The thermodynamic properties including the lattice vibration energy, entropy, and specific heat are predicted for these stable phases. The vibrational free energy decreases with the increase of the temperature, and the entropy and the heat capacity are proportional to the temperature and inversely proportional to the pressure. As the pressure increases, the resistance to the external pressure is strengthened for Th_4H_(15) and ThH_2.     

Y掺杂SrTiO3晶体材料的电子结构计算

采用基于第一性原理的密度泛函理论平面波超软赝势法, 研究了Y掺杂SrTiO₃体系的空间结构和电子结构性质, 得到了优化后体系的结构参数, 掺杂形成能, 能带结构和电子态密度. 对比掺杂浓度为0125, 025, 033时,Sr_1-xY_xTiO₃和SrTi_1-xY_xO₃的掺杂形成能,发现Y替代Sr能形成更稳定的结构. 对Sr_1-xY_xTiO₃（x=0, 0125, 025, 033） 的结构进行了优化,结果表明Y替代Sr后, 随着掺杂浓度增大, 体系的晶格常数逐渐减小, 稳定性逐渐增强. 对不同掺杂浓度的Sr_1-xY_xTiO₃能带结构的计算结果表明：纯净的SrTiO₃是绝缘体, 价带顶在R点, 导带底在Γ点, 费米能级处于价带顶; 掺杂Y后, 费米能级进入到导带底中, 体系呈金属性;掺杂浓度越大,费米能级进入导带的位置越深,禁带宽度也近似变宽. 关键词： 3')" href="#">SrTiO₃ 电子结构 掺杂 VASP     

用Kierlik-Rosinberg的DFT方法研究活性炭分离空气中微量CCl_4

以N_2作为空气的主要成分，利用Kierlik和Rosinberg提出的密度函数理论 (density functional theory, KR-DFT)研究了N_2/CCl_4双元混合物在活性炭内的 吸附。重点讨论了孔径、压力和温度对CCl_4吸附选择性的影响，不为同条件下吸 附回收空气中的CCl_4提供了理论参考。在KR-DFT计算中。N_2分子和CCl_4分子模 型化为单点的Lennard-Jones球；流体分子与吸附剂材料之间的作用采用平均场理 论中的10-4-3模型。在KR-DFT方法中，自由能采用标度的场粒子理论(scaled field particle theory, SPT)处理。讨论了孔径、压力和温度对吸附选择性的影 响。研究结果表明，常温下当空气中CCl_4的含量为1%时，1.39nm的孔径最有利于 CCl_4的吸附。     

高比表面活性碳微球分离H2中少量CO2

以实验数据为依据, 结合双Langmuir模型研究了用高比表面活性碳微球材料分离H2中少量CO2的行为. 在实验中, 用高精度的IGA-003重力吸附仪测定了温度为298、273 和268 K, 压力在0-1.8 MPa范围内CO2、H2及n(CO2):n(H2)=1:9混合物在活性碳微球中的吸附等温线. 比较不同吸附模型的计算结果与实验数据, 结果表明, 双Langmuir模型与实验结果拟合得较好; 而且通过结合理想吸附溶液理论, 该模型可以准确地计算不同的混合物体系(包括H2-CO2体系)的吸附量和吸附选择性. 利用该模型求解了不同温度下各组分的分吸附量, 得到了CO2的吸附选择性;在268 K和1.7 MPa下, CO2的吸附选择性可达到73.4, 表明活性碳微球是一种优秀的吸附H2中少量CO2的材料.     

理解“角落”的影响：流体在矩形纳米孔中的吸附

本文通过巨正则系综Monte Carlo方法研究了不同孔径下氮气、氢气和甲烷在方孔和矩形孔中的吸附。比较了三种势能模型后,采用了最合理的点对点模型。比较了77K时流体在圆柱状孔、方孔和矩形孔的吸附。由于“角”的影响,在方孔和矩形孔内有明显的润湿效应,而圆柱状孔内则没有。文章中比较了氢气和甲烷在三种不同的孔内吸附的情况。研究表明：氢气在方孔内的吸附能力最强,在低压时尤为显著,这是因为“角落”处势能重叠的作用。结果显示在低压时,“角”的存在对流体的吸附和相行为有较强的影响。     

Li修饰B12N12储氢行为的密度泛函理论研究

采用基于密度泛函理论(DFT)的第一性原理投影缀加波方法, 研究了Li 修饰的B₁₂N₁₂笼子的储氢行为.计算结果表明: Li 原子吸附在B₁₂N₁₂笼子的四元环和六元环相交的B－N桥位上, 相对于其它六个高对称吸附位置更稳定, B₁₂N₁₂笼子周围最多可以吸附3 个Li 原子, 最稳定的构型是三个Li 原子同时吸附在N原子顶位(Top-N site). 每个Li 原子的周围能吸附三个氢分子, 笼子外侧还可以吸附两个氢分子, 内部最多可以吸附5 个氢分子. 考虑到笼内和笼外的吸附, B₁₂N₁₂笼子总的储氢量(氢分子)达到9.1% (w).     

Electronic and thermoelectric properties of Mg_2Ge_xSn-_(1-x)(x=0.25,0.50,0.75) solid solutions by first-principles calculations

The electronic structure and thermoelectric(TE) properties of Mg_2Ge_xSn_(1-x)(x = 0.25, 0.50, 0.75) solid solutions are investigated by first-principles calculations and semi-classical Boltzmann theory. The special quasi-random structure(SQS) is used to model the solid solutions, which can produce reasonable band gaps with respect to experimental results.The n-type solid solutions have an excellent thermoelectric performance with maximum zT values exceeding 2.0, where the combination of low lattice thermal conductivity and high power factor(PF) plays an important role. These values are higher than those of pure Mg_2Sn and Mg_2Ge. The p-type solid solutions are inferior to the n-type ones, mainly due to the much lower PF. The maximum zT value of 0.62 is predicted for p-type Mg_2Ge_(0.25)Sn_(0.75) at 800K. The results suggest that the n-type Mg_2Ge_xSn_(1-x) solid solutions are promising mid-temperature TE materials.     

First-principles study of structural,elastic, and thermodynamic properties of ZrHf alloy

Structural parameters, elastic constants, and thermodynamic properties of ordered and disordered solid solutions of Zr Hf alloys are investigated through first-principles calculations based on density-functional theory(DFT). The special quasi-random structure(SQS) method is used to model the disordered phase as a single unit cell, and two lamella structures are generated to model the ordered alloys. Small strains are applied to the unit cells to measure the elastic behavior and mechanical stability of Zr Hf alloys and to obtain the independent elastic constants by the stress–strain relationship. Phonon dispersions and phonon density of states are presented to verify the thermodynamic stability of the considered phases. Our results show that both the ordered and disordered phases of Zr Hf alloys are structurally stable. Based on the obtained phonon frequencies, thermodynamic properties, including Gibbs free energy, entropy, and heat capacity, are predicted within the quasi-harmonic approximation. It is verified that there are no obvious differences in energy between ordered and disordered phases over a wide temperature range.