摩托车传动用滚子链磨损特性的研究

道路行驶磨损试验结果表明，摩托车传动用滚子链套筒和销轴零件的主要磨损形式是磨粒磨损，并伴随有疲劳磨损的特征．由微观分析和链条的磨损伸长量可知：套筒和销轴的初始表面硬度较高，有利于改善其磨损表面形貌状态和耐磨性；在磨粒磨损机制下，套筒和销轴零件的表面硬度较低，容易产生“犁切”，表面层的循环硬化现象比较明显，磨损严重；在油池润滑条件下，套筒和销轴零件的表面硬度较高，裂纹的扩展速率较快，循环软化现象也较明显，当表面硬度较低时发生循环硬化．循环软化与循环硬化是导致磨损严重的原因之一．     

岩石结构面的表面形态特征研究

本文用理论分析和数值模拟方法对具有不同粗糙度和起伏度的岩石结构面的形态特征作了定量研究, 着重研究了结构面表面形态参数与基本形态特征参数的关系, 并研究了它们的采样效应。得到了一系列在建立表面形态参数与物理量相互关系时对合理选用表面形态参数有重要意义的结果, 并可为选取合理的采样间隔和最小采样长度提供依据。     

金属材料的激光表面改性及其在摩擦学中的应用

作者对激光表面处理的各种方法和现有技术水平进行了综述介绍,并就其在改善金属材料表面摩擦磨损性能方面的研究和应用,以及今后的发展都作了简要的分析和讨论。激光相变硬化能使处理的工件形成具有表面压应力的硬质马氏体表面,因而可以降低表面的磨损速率。在金属工件上通过激光包覆高抗磨、抗热、抗腐蚀和抗疲劳的高硬质合金甚至致密陶瓷,在严格控制工件材料对包覆合金稀释的情况下,可使底材获得高的摩擦学性能。激光合金化通过选择合金元素和基底材料能有选择地改进低成本工件的表面,使其具有优异的物理、化学和机械性能。激光上釉是通过细化铸造组织、减少偏析及形成高度过饱和固溶体等亚稳定相乃至非晶态而提高了材料的耐磨性、抗氧化性和抗腐蚀性能。激光冲击硬化是通过在材料表层内形成冲击波而引起“损伤”来改变表层的组织和性能。     

铁路货车心盘材料的耐磨性研究

对比研究了货车心盘用ZG25MnNb钢、AAR-C级钢及经过表面强化处理的锻钢20Mn、锻钢Q345和铸钢ZG25的耐磨性能；采用金相显微镜分析了材料金相结构对其耐磨性能的影响。结果表明，对货车心盘用钢材进行表面强化能够显著改善其耐磨性能ZG25MnNb钢和经表面强化处理的锻钢20Mn的耐磨性较优；表面硬度高而组织细小的材料组成的摩擦副的耐磨性较好。     

相关分析与谱分析在表面形貌研究中的应用

本文通过对表面形貌进行相关分析与谱分析,提出了相对波度和有效波度、相对波长和有效波长的概念,并且指出相关分析与谱分析是研究表面形貌润滑效应的有力工具。作者认为,当相对波度为有效波度时,应当同时考虑波长和幅值的摩擦学效应;当相对波度为高频的粗糙度时,只需考虑表面形貌的幅值效应。     

PARTICLE PROPERTIES—PROMISE AND NEGLECT

We see two major trends in Particle Technology. First, the focus is shifted from unit operations towards functional products, i.e. towards product engineering. Second, modeling will become more and more important. Processes cannot yet be designed from basic molecular understanding. Nanotechnology, however, begins to bridge this gap between molecules and particles and may thus open new ways not only for the production and handling of particulate matter but also for the engineered design of advanced material properties. Starting from the concept of product engineering we investigate the basic preconditions for tailoring nanoparticulate properties, i.e. the control of the particle interactions. Nanotechnology can only be transferred to industrial production if the interactions are effectively controlled. Material and particle properties are essential for predictive models. Although strong tools like MD, DEM or population balance models are available, these models are only predictive if realistic material and particle properties are available which is often not the case. We show for selected examples how particle properties can be obtained by studying the physically relevant elementary processes. The impact breakage behavior of many different materials is described by a master curve. Particle adhesion can be modeled if the roughness of particle and substrate and the Hamaker constant are known. The latter is obtained from adsorption studies.     

考虑疲劳裂纹扩展三维效应的James—Anderson修正方法

James-Anderson方法是一种借助材料疲劳裂纹扩展速率性能来确定三维裂纹应力强度因子的重要实验方法。本文对James-Anderson方法中的疲劳裂纹扩展三维效应进行了分析，并对其进行修正。修正后的James-Anderson方法考虑了疲劳裂纹扩展中由于应力状态而引起的三维效应。研究结果表明：和James-Anderson方法相比，修正后的James-Anderson方法得到的应力强度因子和三维数值方法所得的应力强度因子更吻合。     

残余应力对压力容器破坏模式的影响分析

破前漏(简称LBB)是压力容器、核电站设备结构设计与评价中的一个重要准则.表面裂纹准静态扩展的几何形貌变化规律的预测是破前漏(LBB)评判十分重要的课题之一.本文对特定焊接残余应力场加载作用下,含三维表面裂纹的压力容器模型,用有限元软件(ABAQUS)进行了表面裂纹准静态扩展模拟计算,得到在此残余应力场作用下应力强度因子沿裂纹前缘的分布规律.结合外载引起的应力强度因子,就可以判别裂纹的扩展形貌,从而判断结构是否满足LBB要求.     

含环向表面裂纹圆柱壳的波传播特性研究

研究了振动波在含有环向表面裂纹的无限长圆柱壳中的传播特性.圆柱壳体的振动用Flügge方程来描述.运用线弹性断裂力学的理论,考虑到裂纹的张开、滑移和撕裂3种模式以及它们相互之间的耦合,利用分布的线弹簧来模拟裂纹并建立了裂纹所在区域的局部柔度矩阵,得到由此引起的附加位移和壳体中内力之间的关系.在入射波已知的情况下,根据裂纹两侧区域的位移和内力的连续性条件得到了反射和透射波的幅值系数.分析了入射波通过裂纹后的透射、反射系数与激励频率和裂纹尺寸之间的关系.为基于振动功率流方法识别圆柱壳表面损伤提供了理论基础.     

Probing the nature of the contact between fine particles by using ultrasound propagation

The propagation velocity (vs) of an ultrasonic signal through a granular material depends on the type of interparticle contact. For noncohesive glass beads, a power law behavior for consolidation stresses applied (σc) above 1 MPa has been measured in previous work. This equation is compatible with Hertz's interaction law between elastic solids. In the present work, we have tested the propagation velocity of ultrasound signals through a sample of fine powder. The tensile strength and compactivity of the powder were previously measured by means of the Seville powder tester (SPT), indicating plastic deformation of the surface asperities in contact for small to moderate consolidation stresses. However, the measurements of ultrasound propagation at high consolidations presented here are compatible with Hertz's law. This finding suggests that for high consolidation stresses, surface asperities are flattened, and it is therefore the elastic deformation of the bulk of the particles that determines the transmission of ultrasonic pulses.