Dielectric relaxation study of hydrogen exposure as a source of two-level systems in Al2O3

An important question in the manufacture of superconducting electronics is how to control the two-level systems found in amorphous insulators. The present article shows that hydrogen has a marked impact on the two-level systems in thin films of reactively sputtered Al₂O₃, a standard tunnel oxide for Josephson junctions. The magnitude of dielectric relaxation current in Al₂O₃ films, believed to be caused by two-level systems, is shown to increase monotonically with the flow rate of H₂ into the chamber during deposition. This points toward a potential need for controlling hydrogen during the manufacture of superconducting electronics utilizing Al₂O₃.     

Controlled preparation of aluminum borate powders for the development of defect-related phosphors for warm white LED lighting

The optimization of the elaboration conditions of a new family of highly emissive white phosphors based on glassy yttrium aluminum borates (g-YAB) compositions is presented. Their preparation from solutions is based on the polymeric precursor method (modified Pechini process), involving non-toxic and low cost precursors. The resulting resins were first dried at moderate temperatures followed by two-step annealing treatments of the obtain powders under controlled atmospheres: a first pyrolysis under nitrogen followed by a calcination under oxygen. This favored the gradual oxidation of organic moieties coming from starting materials, avoiding uncontrolled self-combustion reactions, which generate localized hot spots. This prevented phase segregations and the formation of pyrolytic carbon or carbonates, which are strongly detrimental to the luminescence properties. Thus, coupled chemical analyses and luminescence characterizations showed the high chemical homogeneity of the resulting powders and their intense emissions in the whole visible range. These emissions can be tuned from blue to warm white by adjusting the calcination temperature that is an important advantage for the development of LED devices. We showed that impurities of monovalent and divalent cations act as quenching emission centers for these phosphors. Therefore, by increasing the purity grade, we significantly enhanced the PL emissions leading to high internal quantum yields (80–90%). Finally, cathodoluminescence emissions showed the homogeneous dispersion of emitting centers in the g-YAB matrix.     

Using capillary electrophoresis to study the chemical conditions within cracks in aluminum alloys

The environment-assisted cracking (EAC) susceptibility of some aluminum alloys used for airplane structural components currently limits their use in the peak strength condition. Understanding the mechanism of EAC will facilitate the development of crack-resistant alloys with optimum mechanical properties. One component towards understanding the fundamental processes responsible for EAC is a comprehensive knowledge of the chemical conditions within cracks. The present work uses capillary electrophoresis (CE) to quantify the crack chemistry in order to provide insight into the nature of the mechanism controlling cracking. The highly restricted geometry of cracks in metals means that a crack typically contains less than 10 μl of solution. The high mass sensitivity combined with the inherently robust nature of CE makes it an ideal analytical technique for this application. Complicating factors in the accurate determination of the crack environment include high levels of sodium present from the test solution. Low sample volume and analyte matrix complexity necessitated the development of specific sampling, extraction and analysis methods. Analysis of the crack solutions in EAC-susceptible material revealed high levels of Al³⁺, Mg²⁺, Zn²⁺, and Cl⁻ near the crack tip. Cations arise from the anodic dissolution of the alloy, whereas chloride ingress from the external environment occurs to maintain solution electroneutrality within the crack. In contrast, EAC-resistant material exhibited significantly lower concentrations of dissolution products.     

Determination of Aluminum Traces in Hemodialysis and Tap Water Using Standard Method's Procedure Modified and Flow Injection Ionic Exchange Preconcentration

Abstract

A procedure for the spectrophotometric determination of aluminum traces in water using a flow injection (FI) preconcentration system has been proposed. The flow system was made up of a peristaltic pump, an injector‐commutator, and a minicolumn filled with 300.0 mg of Amberlite IR‐120 cationic exchange resin. After the preconcentration step, aluminum was eluted by a 4.0 mol l^?1 HCl solution. In a second stage, out of the flow system, the eluate was neutralized with a 4.0 mol l^?1 NaOH solution. The aluminum was submitted to the reaction with eriochrome cyanine to form a chelate in solution buffered to pH 5.85, according to the Standard Method's procedure with some modifications, and this was followed by spectrophotometric detection. Chemical and flow variables were studied in the preconcentration system. The precision of the proposed method was calculated for a solution containing 46.8 µg l^?1 of Al(III), when 40.0 ml of solution were preconcentrated (n=7), and their respective relative standard deviation (RSD) was 1.8%. The detection limit obtained was 1.7 µg l^?1 of Al(III) (sample volume=40.0 ml). The proposed method was successful in determining aluminum in water certified reference material.     

Surface chemistry of alkyl and perfluoro ethers: a FTIR and ab initio study of adsorption and decomposition of CF3OCF3 on an Al2O3 surface

The adsorption and thermal decomposition of perfluorodimethyl ether, (CF₃)₂O, on a high-surface-area Al₂O₃ surface was investigated by FTIR under both vacuum and pressure conditions. IR spectra in the 4000-1050 cm⁻¹ range were collected and the spectral assignments were assisted by quantum chemical ab initio calculations. The spectral evidence indicated that (CF₃)₂O decomposed to form adsorbed fluoroformate, FCOO (ads). Increases of temperature (up to 525 K) caused the FCOO (ads) to convert to hydrogen formate, HCOO (ads). Surface hydroxyl groups participated in the decomposition of (CF₃)₂O and the conversion of FCOO (ads) to HCOO (ads). A decomposition mechanism is proposed.     

毛细管电泳法测定人发中铝

用毛细管离子分析 (CIA)法 ,采用 10mmol·L- 1咪唑为背景电解质 ,4 0 %甲醇为选择性改性剂 ,在 pH 2 .5、分离电压为 2 5kV、柱温为 2 2℃的电泳条件下 ,采用间接紫外检测 (2 14nm ) ,在5min内测定了人发中铝 ,方法简便、快速、灵敏度高、重现性好、测定成本低     

电感耦合等离子体发射光谱法测定铝合金中La、Ce、Pr、Nd、Sm

利用ICP—AES仪测定稀土铝合金中微量的La、Ce、Pr、Nd、Sm。试样用酸分解,直接上机测定,对光谱干扰情况和仪器参数的选择进行了研究。实验结果和推荐值核对相符。     

MnOx/Al-SBA-15的结构性质及低温NH3选择性催化还原NOx

采用后合成法制备MnO_x/Al-SBA-15催化剂, 考察了催化剂的低温NH₃选择性催化还原(SCR)NO_x的性能. 利用傅里叶透射红外变换(FTIR)光谱、N₂吸附-脱附、X射线衍射(XRD)、扫描电镜(SEM)、拉曼光谱(Raman)、X射线光电子能谱(XPS)及NH₃程序升温脱附(NH₃-TPD)的表征手段, 对催化剂的结构性质和SCR性能进行了系统分析. 结果表明, 适量Al的掺杂能提高MnO_x/SBA-15催化剂的SCR活性, 当硅铝摩尔比为50时, 催化剂活性最佳. 表征结果显示, Al掺杂后, 催化剂仍保持良好的骨架结构, 较大比表面、孔容和孔径, 并且Mn在催化剂表面富集, 由低价态转化为高价态, MnO₂为催化剂的主要活性相. 此外, Al的掺杂使MnO_x在催化剂表面高度分散, 表面酸性增强, 从而提高了催化剂的SCR活性.     

酸性AlCl3-BMIC离子液体中的铝阳极溶解

采用线性扫描伏安法研究了Lewis 酸性AlCl₃-BMIC (BMIC: 1-butyl-3-methylimidazolium chloride)离子液体中铝电极的溶解. 铝电极在阳极极化时出现了钝化现象, 钝化是由于在铝电极表面形成了固体AlCl₃钝化膜造成的. 铝的电化学溶解过程可以依次分为三个区: 电化学控制区、过渡区和钝化区. 在电化学控制区, 铝的电化学溶解速率随着电位的正移而逐渐增加; 在过渡区, 由于电极表面AlCl₄^-和Al₂Cl₇^-浓度发生改变而析出固体AlCl₃使得铝电化学溶解速率随着电位的正移而逐渐减小; 当钝化膜形成之后, 铝的电化学溶解速率不再随着电位的正移而发生改变, 铝溶解进入钝化区. 增加搅拌、升高温度、降低离子液体AlCl₃摩尔分数都可以增加铝溶解阳极极限电流密度.     

Aromatization of Hantzsch 1,4-Dihydropyridines with Al(NO3)3·9H2O and/or Fe(NO3)3·9H2O in the Presence of Silica Sulfuric Acid Under Mild and Heterogeneous Conditions

A simple and convenient method for the aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is achieved via combination of aluminum or ferric nitrates and silica sulfuric acid as environmentally friendly and novel oxidizing media. This oxidation was carried out in dichloromethane under heterogeneous conditions with good to excellent yields.