Silica gel promotes reductions of aldehydes and ketones by N-heterocyclic carbene boranes

N-Heterocyclic carbene boranes (NHC-boranes) such as 1,3-dimethylimidazol-2-ylidine trihydridoborane (diMe-Imd-BH(3)) serve as practical hydride donors for the reduction of aldehydes and ketones in the presence of silica gel. Primary and secondary alcohols are formed in good yields under ambient conditions. Aldehydes are selectively reduced in the presence of ketones. One, two, or even all three of the boron hydrides can be transferred. The process is attractive because all the components are stable and easy to handle and because both the reaction and isolation procedures are convenient.     

Synthesis of the core of actinophyllic acid using a transannular acyl radical cyclization

A synthetic study of actinophyllic acid based on an original strategy has been described. A transannular acyl radical cyclization allowed us to obtain a key bicyclo[3.3.2] framework, and construction of a core of the target alkaloid has been accomplished by subsequent introduction of a C2 unit.     

Synthesis and physicochemical properties of metallobacteriochlorins

Access to metallobacteriochlorins is essential for investigation of a wide variety of fundamental photochemical processes, yet relatively few synthetic metallobacteriochlorins have been prepared. Members of a set of synthetic bacteriochlorins bearing 0-4 carbonyl groups (1, 2, or 4 carboethoxy substituents, or an annulated imide moiety) were examined under two conditions: (i) standard conditions for zincation of porphyrins [Zn(OAc)(2)·2H(2)O in N,N-dimethylformamide (DMF) at 60-80 °C], and (ii) treatment in tetrahydrofuran (THF) with a strong base [e.g., NaH or lithium diisopropylamide (LDA)] followed by a metal reagent MX(n). Zincation of bacteriochlorins that bear 2-4 carbonyl groups proceeded under the former method whereas those with 0-2 carbonyl groups proceeded with NaH or LDA/THF followed by Zn(OTf)(2). The scope of metalation (via NaH or LDA in THF) is as follows: (a) for bacteriochlorins that bear two electron-releasing aryl groups, M = Cu, Zn, Pd, and InCl (but not Mg, Al, Ni, Sn, or Au); (b) for bacteriochlorins that bear two carboethoxy groups, M = Ni, Cu, Zn, Pd, Cd, InCl, and Sn (but not Mg, Al, or Au); and (c) a bacteriochlorin with four carboethoxy groups was metalated with Mg (other metals were not examined). Altogether, 15 metallobacteriochlorins were isolated and characterized. Single-crystal X-ray analysis of 8,8,18,18-tetramethylbacteriochlorin reveals the core geometry provided by the four nitrogen atoms is rectangular; the difference in length of the two sides is ～0.08 ?. Electronic characteristics of (metal-free) bacteriochlorins were probed through electrochemical measurements along with density functional theory calculation of the energies of the frontier molecular orbitals. The photophysical properties (fluorescence yields, triplet yields, singlet and triplet excited-state lifetimes) of the zinc bacteriochlorins are generally similar to those of the metal-free analogues, and to those of the native chromophores bacteriochlorophyll a and bacteriopheophytin a. The availability of diverse metallobacteriochlorins should prove useful in a variety of fundamental photochemical studies and applications.     

Bulk- and surface-sensitive high-resolution photoemission study of two mott-hubbard systems: SrVO3 and CaVO3

We study the electronic structure of Mott-Hubbard systems SrVO3 and CaVO3 with bulk and surface-sensitive high-resolution photoemission spectroscopy, using a vacuum ultraviolet laser, synchrotron radiation, and a discharge lamp (hv = 7-21 eV). A systematic suppression of the density of states (DOS) within approximately 0.2 eV of the Fermi level (EF) is found on decreasing photon energy, i.e., on increasing bulk sensitivity. The coherent band in SrVO3 and CaVO3 is shown to consist of surface and bulk-derived features, separated in energy. The stronger distortion on surface of CaVO3 compared to SrVO3 leads to a higher surface metallicity in the coherent DOS at EF, consistent with recent theory.     

"Click peptide" based on the "o-acyl isopeptide method": control of A beta1-42 production from a photo-triggered A beta1-42 analogue

A clear understanding of the dynamic events of amyloid beta peptide (Abeta) 1-42, such as the folding, self-assembly, and aggregation processes, would be of great significance in Alzheimer's disease (AD) research. However, elucidation of these Abeta1-42 dynamic events is a difficult issue due to uncontrolled polymerization, which also poses a significant obstacle for establishing an experimental system that clarifies the pathological function of Abeta1-42. On the basis of the O-acyl isopeptide method, we herein developed a novel photo-triggered "click peptide" of Abeta1-42, for example, 26-N-Nvoc-26-AIAbeta42, in which the photocleavable 6-nitroveratryloxycarbonyl (Nvoc) group was introduced at the alpha-amino group of Ser26 in 26-O-acyl isoAbeta1-42 (26-AIAbeta42). From the results, (1) the click peptide did not exhibit the self-assembling nature under physiological conditions due to one single modified ester; (2) photoirradiation of the click peptide and subsequent O-N intramolecular acyl migration afforded the intact Abeta1-42 with a quick and one-way conversion reaction (so-called "click"), while the click peptide was stable under nonphotolytic or storage conditions. In addition, it is advantageous that no additional fibril inhibitory auxiliaries were released during conversion to Abeta1-42. This method provides a novel system useful for investigating the dynamic biological functions of Abeta1-42 in AD by inducible activation of Abeta1-42 self-assembly.     

NO dissociation on Cu(111) and Cu2O(111) surfaces: a density functional theory based study

NO dissociation on Cu(111) and Cu(2)O(111) surfaces is investigated using spin-polarized density functional theory. This is to verify the possibility of using Cu-based catalyst for NO dissociation which is the rate limiting step for the NO(x) reduction process. The dissociation of molecularly adsorbed NO on the surface is activated for both cases. However, from the reaction path of the NO-Cu(2)O(111) system, the calculated transition state lies below the reference energy which indicates the possibility of dissociation. For the NO-Cu(111) system, the reaction path shows that NO desorption is more likely to occur. The geometric and electronic structure of the Cu(2)O(111) surface indicates that the surface Cu atoms stabilize themselves with reference to the O atom in the subsurface. The interaction results in modification of the electronic structure of the surface Cu atoms of Cu(2)O(111) which greatly affects the adsorption and dissociation of NO. This phenomenon further explains the obtained differences in the dissociation pathways of NO on the surfaces.     

The Cross-ratio Compactification of the Configuration Space of Ordered Points on 

A natural compactification of the virtual configuration space of N points on the Riemann sphere  is constructed by using cross-ratios. We show that this compactification is homeomorphic to the Bers' compactification of the virtual moduli space of a punctured Riemann sphere of type N . In particular, the system of global and explicit coordinates of this standard compactification is given by cross-ratios.     

Development of a new type multi-moderator neutron spectrometer

A multi-moderator spectrometer on which is mounted a pair of ⁶Li and ⁷Li glass scintillators has been developed as a new type neutron spectrometer which can measure the neutron spectrum in a mixed field of neutrons, charged particles and gamma-rays realized in space. The particle identification capability was investigated in neutron-gamma-ray and neutron-proton mixed fields and the neutron response functions of the spectrometer were obtained by calculations and experiments up to 200 MeV.     

Synthesis of meso-substituted chlorins via tetrahydrobilene-a intermediates.

Chlorin building blocks incorporating a geminal dimethyl group in the reduced ring and synthetic handles in specific patterns at the perimeter of the macrocycle are expected to have utility in biomimetic and materials chemistry. A prior route employed condensation of a dihydrodipyrrin (Western half) and a bromodipyrromethane-monocarbinol (Eastern half), followed by oxidative cyclization of the putative dihydrobilene-a to form the meso-substituted zinc chlorin in yields of approximately 10%. The limited stability of the dihydrodipyrrin precluded study of the chlorin-forming process. We now have refined this methodology. A tetrahydrodipyrrin Western half (2,3,4,5-tetrahydro-1,3,3-trimethyldipyrrin) has been synthesized and found to be quite stable. The condensation of the Western half and an Eastern half (100 mM each) proceeded smoothly in CH(3)CN containing 100 mM TFA at room temperature for 30 min. The resulting linear tetrapyrrole, a 2,3,4,5-tetrahydrobilene-a, also is quite stable, enabling study of the conversion to chlorin. Refined conditions for the oxidative cyclization were found to include the following: the tetrahydrobilene-a (10 mM), AgTf (3-5 molar equiv), Zn(OAc)(2) (15 molar equiv), and 2,2,6,6-tetramethylpiperidine (15 molar equiv) in CH(3)CN at reflux exposed to air for 4-6 h, affording the zinc chlorin. The chlorin-forming process could be implemented in either a two-flask process or a one-flask process. The two-flask process was applied to form six zinc chlorins bearing substituents such as pentafluorophenyl, 3,5-di-tert-butylphenyl, TMS-ethyl benzoate, iodophenyl, or ethynylphenyl (deprotection of the TMS-ethynyl group occurred during the oxidative cyclization process). The stepwise yields (isolated) for the condensation and oxidative cyclization processes forming the tetrahydrobilene and zinc chlorin were 32-72% and 27-62%, respectively, giving overall yields of zinc chlorin from the Eastern and Western halves of 12-45%. Taken together, the refinements introduced enable 100-mg quantities of chlorin building blocks to be prepared in a facile and rational manner.     

Hyperfine Interaction of 140Ce(←140La) in CaB6

A ¹⁴⁰La(I ^π=3⁻, T _1/2=40.3 h)-doped layer has been produced in CaB₆ by means of radioactive isotope (RI) beam technique: ¹⁴⁰Cs(I ^π=1⁻, T _1/2=63.7 s) was implanted into CaB₆ and the radioactive equilibrium of ¹⁴⁰Ba–¹⁴⁰La was achieved. The concentration of La in CaB₆ was La/Ca ∼0.001. Obtained TDPAC spectra of the 2083 keV level of ¹⁴⁰Ce (I ^π=4⁺, T _1/2=3.4 ns, μ=+4.35±0.10 μ _N ) followed by the β decay of ¹⁴⁰La showed the existence of hyperfine magnetic fields: B _hyp=−15.0±0.5 T and −1.00±0.15 T. This revised version was published online in September 2006 with corrections to the Cover Date.