金属间化合物电催化剂Pt1Te1/XC-72的制备及其电催化氧化甲醇性能

以氯铂酸和亚碲酸钠为前驱体,采用两步法在醇水体系下得到负载型Pt1Te1金属间化合物前驱体,通过热处理得到负载型金属间化合物电催化剂Pt1Te1/XC-72.采用X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）、电子能谱（EDS）和循环伏安方法（CV）对催化剂进行表征.结果表明：所得产物呈有序金属间化合物Pt1Te1结构,平均粒径4.5nm,在碳载体上具有很好的分散性;负载型金属间化合物电催化剂Pt1Te1/XC-72具有较高的电催化氧化甲醇活性,其优秀的催化氧化甲醇活性与Pt形成金属间化合物后所带来的几何及电子结构改变密切相关.     

CO_2-甲醇和CO_2-乙醇体系的界面性质

在交叉缔合的均相状态方程的基础上,结合密度梯度理论(density gradient theory,DGT),建立了适用于CO2-甲醇和CO2-乙醇二元体系界面性质研究的状态方程,对CO2-乙醇体系表面张力的关联结果与实验值吻合良好.阐明了CO2分子与甲醇分子和乙醇分子之间的交叉缔合作用对二元体系表面张力计算结果的影响,以及界面相中CO2与醇羟基之间的交叉缔合与温度和压力之间的关系.     

醋酸溶液中Pd-CuPc/Y催化甲烷选择氧化制甲醇

以氯化铜、钼酸铵、苯酐、氯化铵、尿素和NaY分子筛为原料,采用苯酐-尿素法制备了酞菁铜/分子筛复合物CuPc/Y.采用等体积浸渍法将金属钯担载在CuPc/Y上制备了Pd-CuPc/Y催化剂,并在醋酸水溶液中考察了其催化甲烷选择氧化合成甲醇反应的性能,结果表明,催化性能与反应温度、溶剂中CH₃COOH与H₂O的混合比例、对苯醌用量、反应时间等因素有关,在0.5%Pd-0.5%CuPc/Y添加量0.5 g、CH₃COOH与H₂O体积比4∶1、对苯醌用量1 000 μmol、反应时间3 h、反应温度150 ℃的条件下,甲醇的最佳生成量为1 840 μmol.Pd-CuPc/Y催化剂可以多次循环使用,但由于催化剂流失和催化剂表面的钯粒子聚集的原因,循环使用后的催化剂催化活性有所下降.Pd-CuPc/Y在醋酸溶液中催化甲烷选择氧化合成甲醇是亲电取代反应和活性氧物种氧化共同作用的结果.     

Pt/Au/Fe3O4的制备及其电化学性能

以制得的纳米Fe₃O₄颗粒作为载体,用还原法将还原出的Au与Pt分别负载到Fe₃O₄颗粒表面,制得纳米Pt/Au/Fe₃O₄复合材料。对Pt/Au/Fe₃O₄进行紫外可见光吸收光谱、透射电子显微镜、X射线衍射及光电子能谱等物理表征,结果表明,Au与Pt均匀地沉积到了Fe₃O₄纳米颗粒表面。对纳米Pt/Au/Fe₃O₄复合材料进行循环伏安扫描,当H₂PtCl₆的加入量达到8 mL时,Pt/Au/Fe₃O₄催化性能最佳;正扫电流峰i_p与扫描速率的平方根v^1/2线性相关,Pt/Au/Fe₃O₄催化氧化甲醇的过程受扩散控制;对催化剂进行201次循环伏安扫描,催化剂仍然能保持较好的催化性能且稳定性良好。因此,所合成催化剂Pt/Au/Fe₃O₄是一种具有良好化学稳定性的阳极催化剂材料。     

Ce-Zr复合氧化物负载Au纳米粒子催化甲醇氧化反应中的载体效应

采用沉积-沉淀法制备了不同Ce/Zr比的Au/Ce1-xZrxO2(x=0,0.2,0.4,0.6,0.8)催化剂,研究了其催化甲醇完全氧化反应和选择氧化反应中的载体效应.通过X射线衍射、拉曼光谱、X射线光电子能谱、高分辨透射电镜、CO2和NH3程序升温脱附以及CO吸附红外光谱等手段表征了催化剂的结构、组成和酸碱性.结果表明,这些催化剂具有相似的载体粒径和晶相结构、Au担载量、Au粒径和价态以及相似的表面酸碱性等.在甲醇完全氧化和甲醇选择氧化反应中,Au/Ce1-xZrxO2催化剂活性均随载体中Ce/Zr比的减小而降低.与催化剂储氧量,即表面活性氧浓度下降一致.对于甲醇选择氧化反应,甲酸甲酯选择性则随Ce/Zr比减小而升高.这不是由于催化剂表面酸碱性差异所致,而是与催化剂载体中Ce含量降低导致的表面活性氧浓度减小和催化剂的氧化能力减弱密切相关.Au催化剂载体效应本质的认识将有助于为目标氧化反应设计具有更高活性或选择性的催化剂体系.     

Theoretical Insights into Intermolecular Hydrogen-Bonding Strengthening in Fluorenone-Methanol Complexes Induced by Electronic Excitation and Bulk Solvent Effect

This work presents a theoretical insight into the variation of the site-specific intermolecular hydrogen-bonding （HB）, formed between C=O group of fluorenone （FN） and O-H groups of methanol （MeOL） molecules, induced by both the electronic excitation and the bulk solvent effect. Through the calculation of molecular ground- and excited-state properties, we not only demonstrate the characters of HB strengthening induced by electronic excitation and the bulk solvent effect but also reveal the underlying physical mechanism which leads to the HB variation. The strengthening of the intermolecular HB in electronically excited states and in liquid solution is characterized by the reduced HB bond-lengths and the red-shift IR spectra accompanied by the increasing intensities of IR absorption corresponding to the characteristic vibrational modes of the O-H and C--O stretching. The HB strengthening in the excited electronic states and in solution mainly arises from the charge redistribution of the FN molecule induced by the electronic excitation and bulk solvent instead of the intermolecular charge transfer. The charge redistribution of the solute molecule increases the partial dipole moment of FN molecule and the FN-MeOL intermolecular interaction, which subsequently leads to the HB strengthening. With the bulk solvent effect getting involved, the theoretical IR spectra of HBed FN-MeOL complexes agree much better with the experiments than those of gas-phase FN-MeOL dimer. All the calculations are carried out based on our developed analytical approaches for the first and second energy derivatives of excited electronic state within the time-dependent density functional theory.     

How Many Methanol Molecules Can Solvate a Glycine: a PBE1PBE Approach

Microsolvation of glycine in methanol clusters is explored by the use of DFT calculation method. The lowest energy conformations within 16.72 kJ·mol-1 of the glycine clustering with one to six methanol molecules, which are obtained at the B3LYP/6-31+G(d) level of theory, are reoptimized at PBE1PBE/6-311+G(d,p). The calculated results agree with our previous results with B3LYP (Chin. J. Chem. Phys. 22 (2009) 577) that the clusters of two forms (Z-and N-form) tend to be isoenergetic when the number of the solvate molecules reaches six. Furthermore, this result is in good agreement with the experiment of the tryptophan-methanol clusters, implying that the present treatments are reasonable and reliable. The results also indicate that nine methanol molecules are not enough to fully solvate a glycine molecule, and a tentative estimation is obtained that ten methanol molecules may fully solvate a glycine molecule, which consists with the experiment results.     

CuNaY分子筛的制备及其催化甲醇氧化羰基化

采用多种铜盐溶液与NaY分子筛离子交换制备了CuNaY催化剂,通过加入氨水提高溶液pH值以及高温活化,显著提高了该催化剂对甲醇氧化羰基化合成碳酸二甲酯的反应活性。不同的铜盐水溶液交换制备的CuNaY催化剂催化活性不同,添加氨水将溶液pH值调节为11后,离子交换制备的CuNaY催化剂的催化活性和DMC选择性明显升高且趋于一致。经元素分析、XRD、XPS和H₂-TPR表征可知,加入氨水可促进Cu²⁺离子交换的进行,提高CuNaY催化剂中Cu的交换量,催化剂中约75%的Cu²⁺定位于分子筛的超笼中。     

溶剂甲醇过程的溶剂选择

溶剂甲醇过程的溶剂选择至关重要。本文筛选了三乙二醇二甲醚（ＴＲＩＧＬＹＭＥ）作为溶剂，测定了甲醇在溶剂中的溶解度及活度系数。在本文的研究条件下，甲醇的溶解特性符合亨利定律，以实验数据回归，亨利系数Ｈ＝０．３７４３ｅｘｐ（－３０１３．６／Ｔ）ＭＰａｍ＾３ｍｏｌ＾－１。通过与其他溶剂比较后可以得出：按甲醇在不同溶剂中的溶解度大小排序：ＴＧＩＧＬＹＭＥ〉ＴＥＧＤＭＥ〉Ｓｑｕａｌａｎｅ〉ＶｅｓｔｏｗａｘＳ     

部分卸载时被动式燃料电池动态响应实验研究

对全被动式直接甲醇燃料电池在电流部分卸载情况下的输出电压动态响应开展了实验研究.实验结果显示,电流按照方波,后直角三角波、前直角三角波和等腰三角波加载/卸载时的燃料电池输出电压动态响应规律不尽相同.燃料电池在高电流强度加载时,不同甲醇溶液浓度时的电池输出电压比较接近.在电流部分卸载的情况下,1 mol/L甲醇溶液浓度时...