确定大气颗粒物平均滞留时间的新方法

从低层大气的基本属性出发,利用大气颗粒物中放射性核素的衰变特性与转移速率等相关信息, 建立了单位体积大气颗粒物中被吸附的放射性粒子数、衰变粒子数和转移粒子数的数学模型, 获得了确定低层大气颗粒物平均滞留时间的新方法.该方法解决了当前相关研究中出现的困惑, 说明了大气具有有限的自净功能,给出了大气颗粒物中同一衰变链上各核素达到活度平衡的条件 及降低平均滞留时间的途径,为大气环境的监测与治理提供了科学依据. 关键词： 大气颗粒物 平均滞留时间 氡子体 监测     

Gd2(WO4)3: Eu纳米发光材料中黄昆因子和能量传递速率的实验获得

采用共沉淀法制备了不同Eu³⁺掺杂浓度的Gd₂(WO₄)₃纳米发光材料. 测量了纳米材料样品的X射线衍射谱(XRD) 和场发射扫描电镜, 对样品的结构和形貌进行了表征. 测量了各样品的发射光谱和激发光谱(声子边带光谱), 绘制了浓度猝灭曲线, 确定了最佳的掺杂浓度为20 mol%. 通过声子边带光谱计算了不同掺杂浓度样品的黄昆因子. 测量了不同浓度样品的荧光寿命, 利用Auzel模型对Eu^{3+ 5}D₀能级荧光寿命数据进行了拟合, 确定了⁵D₀能级的固有寿命和猝灭过程中生成的声子数. 本文还根据荧光寿命数据计算了Eu³⁺之间的能量传递速率, 确定了能量传递速率与浓度的关系. 关键词： 钨酸盐 3+')" href="#">Eu³⁺ 黄昆因子 能量传递速率     

我国中等收入者比重及其影响因素的测度研究

针对中等收入者在现代社会中的重要作用和当前中等收入者研究方法不足的状况,本文基于现代非参数方法中的核密度佑计方法,提出测算中等收入者比重及其变动的新方法,并构建影响中等收入者比重变动的因素动态分解方法。依据居民收入的微观调查数据,本文提出我国中等收入的绝对标准和相对标准,对我国中等收入者的比重及变动情况进行测度,并对影响我国中等收入者比重变动的增长效应、分配效应和水平效应进行分解。在理论和实证研究基础上,得到有政策指导意义的结论。     

稠油热驱过程多场耦合的描述与分析

阐述了由达西定律反映的驱油过程速率、动力与阻力间的动力学基本关系,分析得到热驱过程耦合现象的本质是,通过加热改善了与驱动有关的传递过程的动力与阻力特性,使得采油速率及采收率同时得到提高。以势场为载体,根据驱油过程"流"与"力"的相互关系,将驱油过程多场耦合的多层次描述慨括为动力势场与阻力势场的耦合、动力势场间的耦合及阻力势场间的耦合。在此基础上,结合渗流力学的基本研究方法,给出多场耦合分析方法的一般步骤。最后以热水驱替过程为例作多场耦合分析,可从新的角度清晰、深入地描述此类过程。     

Lattice Boltzmann Simulation of the Cross Flow Over a Cantilevered and Longitudinally Vibrating Circular Cylinder

The multiple-relaxation-time lattice Boltzmann method （MRT-LBM） is implemented to numerically simulate the cross flow over a longitudinal vibrating circular cylinder. This research is carried out on a three-dimensional （3D） finite cantilevered cylinder to investigate the effect of forced vibration on the wake characteristics and the 3D effect of a cantilevered cylinder. To meet the accuracy of this method, the present calculation is carried out at a low Reynolds number Re =100, as well as to make the vibration obvious, we make the vibration strong enough. The calculation results indicate that the vibration has significant influence on the wake characteristics. When the vibrating is big enough, our early works show that the 2D vortex shedding would be locked up by vibration. Contrarily, this phenomenon would not appear in the present 3D case because of the end effect of the cantilevered cylinder.     

Lattice Boltzmann Simulation for the Optimized Surface Pattern in a Micro-Channel

Based on the Bhatangar-Gross-Krook （BGK） models, numerical simulation using the lattice Boltzmann model is performed to investigate the optimized surface pattern in a micro-channel. In order to simulate the practical situation correctly, a slip/no-slip boundary condition is applied with making several assumptions. To assess the validity and efficiency of the model, one benchmark problem with considering the surface patterns is studied. Numerical results show the value of rms velocity Vrms increases with the increasing ratio β and larger Reynolds number Re, higher fluctuation of the rms oscillating velocity. Furthermore, the results show that a good mixing effect can be obtained when Re is large enough and the ratio β is about 1.618,which is the appropriate choice, i.e. the well known golden section phenomenon.     

Solid-phase Synthesis of-Haloaldehydes from Polymer-supported 4-(Phenylseleno)morpholine

Polymer-supported reagents for organic synthesis are enjoying a renewed popularity with the emergence of combinatorial chemistry in recent years1. 4-(Arylseleno)morpholines formed in situ are useful -seleno-introducing reagents for saturated aldehydes2. -Sele- noaldehydes, as a frequently used intermediates, can be converted into -haloaldehydes by halogenating reaction3. However, organic selenium reagents always have a foul smell and are quite toxic, which is often problematic in organic sy…     

Polystyrene-supported Benzyl Selenide: An Efficient Reagent for Highly Stereocontrolled Synthesis of Substituted Olefins

Solid-phase methodology has been rapidly and extensively applied to the preparation of small organic molecules recently1. It might be argued that selenoxide syn-elimination provided the principal impetus for the development of organoselenium chemistry. In addition, the required selenoxides are readily available from the oxidation of the corresponding selenides, which in turn can be prepared by the reaction of selenium-stabilized carbanions with various electrophilic substrates2. However, or…     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

Studies on the Total Synthesis of Hainanolide (VII) - Analysis of the Relative Stereochemistry of key Intermediate 2

The natural product, hainanolide 1, also under the name harringtonolide2 demonstrated antitumor and antiviral activities in preliminary test. Its structure was determined by X-ray diffraction. The total synthesis of 1 was reported recently by Mander3. A different scheme of its synthesis has been studied in our laboratory4. Here the determination of the stereochemical structure of the key intermediate 2 in the synthesis was reported. HMBC and HMQC spectra identified the skeleton and H,…