Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

n class="NLM_inline-graphic">na101/home/literatum/publisher/tandf/journals/content/gsch20/2005/gsch20.v017.i06/10610270500245691/production/images/medium/gsch_a_10326748_o_gsch0485art001.gif" alt=" />n>     

Heavy Metal Removal from Synthetic Solutions with Magnetic Beads Under Magnetic Field

The aim of this study is to prepare magnetic beads which can be used for the removal of heavy metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate‐vinyl imidazole) [m‐poly(EGDMA‐VIM)] beads were produced by suspension polymerization in the presence of magnetite Fe₃O₄ nano‐powder. The specific surface area of the m‐poly(EGDMA‐VIM) beads was found to be 63.1 m²/g with a size range of 150–200 µm in diameter and the swelling ratio was 85%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA‐VIM) beads was 12.4%. The maximum binding capacities of the m‐poly(EGDMA‐VIM) beads were 32.4 mg/g for Cu²⁺, 45.8 mg/g for Zn²⁺, 84.2 mg/g for Cd²⁺and 134.5 mg/g for Pb²⁺. The affinity order on mass basis is Pb²⁺>Cd²⁺>Zn²⁺>Cu²⁺. Equilibrium data agreed well with the Langmuir model. pH significantly affected the binding capacity of the magnetic beads. Binding of heavy metal ions from synthetic wastewater was also studied. The binding capacities were 26.2 mg/g for Cu²⁺, 33.7 mg/g for Zn²⁺, 54.7 mg/g for Cd²⁺ and 108.4 mg/g for Pb²⁺. The magnetic beads could be regenerated up to about 97% by treating with 0.1 M HNO₃. These features make m‐poly(EGDMA‐VIM) beads a potential candidate for support of heavy metal removal under magnetic field.     

XANES speciation of mercury in three mining districts – Almadén,Asturias (Spain), Idria (Slovenia)

The mobility, bioavailability and toxicity of mercury in the environment strongly depend on the chemical species in which it is present in soil, sediments, water or air. In mining districts, differences in mobility and bioavailability of mercury mainly arise from the different type of mineralization and ore processing. In this work, synchrotron‐based X‐ray absorption near‐edge spectroscopy (XANES) has been taken advantage of to study the speciation of mercury in geological samples from three of the largest European mercury mining districts: Almadén (Spain), Idria (Slovenia) and Asturias (Spain). XANES has been complemented with a single extraction protocol for the determination of Hg mobility. Ore, calcines, dump material, soil, sediment and suspended particles from the three sites have been considered in the study. In the three sites, rather insoluble sulfide compounds (cinnabar and metacinnabar) were found to predominate. Minor amounts of more soluble mercury compounds (chlorides and sulfates) were also identified in some samples. Single extraction procedures have put forward a strong dependence of the mobility with the concentration of chlorides and sulfates. Differences in efficiency of roasting furnaces from the three sites have been found.     

Novel organotin‐containing shell‐cross‐linked knedel and core‐cross‐linked knedel: Synthesis and application in catalysis

A series of novel organotin‐containing core‐cross‐linked knedels and shell‐cross‐linked knedels were first synthesized facilely from poly(styrene)‐b‐poly(acrylate acid) nanoparticles in different selective solvents [Tetrahydrofuran (THF)/H₂O or THF/n‐octane] by using organotin compound 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane as a new cross‐linker. The formation of the 1‐chloro‐3‐carboxylato‐tetra‐n‐butyl‐distannoxane layer in our cross‐linking reaction was supported by Fourier transform infrared (FT‐IR) and inductive coupled plasma emission spectrometer (ICP) analysis of the resulting shell‐cross‐linked knedels and core‐cross‐linked knedels. Transmission electron microscopy (TEM) study showed the spherical morphology and the size of the core‐cross‐linked knedels and shell‐cross‐linked knedel. Especially, the layer structure of the core‐cross‐linked knedels was clearly displayed in TEM image. The increase of extent of cross‐linking lead to the increasing of diameter for the shell‐cross‐linked knedels, whereas there was no significant effect on the core‐cross‐linked knedels. Dynamic light scattering (DLS) measurements gave hydrodynamic diameters of the core‐cross‐linked knedels that were in agreement with the TEM diameters. Moreover, the wall thickness of the shell layer of the core‐cross‐linked knedels could be easily modified by varying the block copolymer composition. Notably, the organotin‐containing core‐cross‐linked knedel exhibited highly efficient catalytic activity for the aqueous esterification reaction under nearly neutral conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Syntheses and optoelectronic properties of quinoxaline polymers: The effect of donor unit

Tuning the bandgap of electrochromic polymers is one of the important research topics in electrochromism. To understand clearly the effect of donor unit in donor–acceptor–donor‐type polymers, 2,3‐bis(4‐tert‐butylphenyl)‐5,8‐di(thiophen‐2‐yl)quinoxaline and 2,3‐bis(4‐tert‐butylphenyl)‐5‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐ 5‐yl)‐8‐(thiophen‐2‐yl)quinoxaline were synthesized and polymerized potentiodynamically. Their electrochemical and spectroelectrochemical studies were performed, and the results were compared with those of poly(2,3‐bis(4‐tert‐butylphenyl)‐5,8‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)quinoxaline) (Gunbas et al., Adv Mater 2008, 20, 691–695). A blue shift in the polymer π–π* transitions revealed that the bandgap of such polymers with the same acceptor unit is related to the electron density of donor units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011