Comparative phytotoxicity of methylated and inorganic arsenic- and antimony species to Lemna minor, Wolffia arrhiza and Selenastrum capricornutum

The alkylation of metalloids through the transfer of methyl groups is an important factor in the biogeochemical cycling of elements like arsenic and antimony. In the environment, many different organic and inorganic forms of these elements can therefore be found in soils, sediments or organisms. Studies that compare the ecotoxicity of these different chemical species however are rare. Therefore, this study aimed to generate toxicity data on two scarcely studied organic compounds of arsenic and antimony, as well as to compare their toxicity to the inorganic species, which are studied so far to a higher extent, in order to improve the environmental effect assessment of these elements. To this purpose, bioassays were performed in which three different aquatic organisms (the floating water plants Lemna minor and Wolffia arrhiza and the green alga Selenastrum capricornutum) were exposed to a concentration series of 3 different arsenic species (sodium arsenite — As(III), sodium arsenate — As(V), and monomethylarsonous diiodide — MMAs(III)) and three different antimony species (antimony potassium tartrate hydrate — Sb(III), potassium hexahydroxoantimonate — Sb(V), trimethylantimony(V) bromide — TMSb(V). The observed effect concentrations demonstrated that the inorganic (III)- and (V)-valent species of arsenic were clearly more toxic than the corresponding antimony species. The highest overall toxicity has been shown by MMAs(III) followed by the inorganic As(III). The highest toxicity of the three tested antimony species has been observed for TMSb(V). The observed differences in effect levels stress the importance once more that speciation must not be ignored in toxicity studies.     

Chitosan functionalized with di-2-propanolamine: Its application as solid phase extractant for the determination of germanium in water samples by ICP-MS

Cross-linked chitosan was chemically modified with di-2-propanolamine via an arm of chloromethyloxirane (CCTS-DPA resin). The adsorption behavior of the resin towards 62 elements was examined using a mini-column pretreatment method, and the collected elements were eluted with 1 mol L^− 1 nitric acid before measurement by inductively coupled plasma-mass spectrometry (ICP-MS).The CCTS-DPA resin can adsorb several metal cations and several oxoanionic elements at appropriate pH. However, di-2-propanolamine (DPA) attached to cross-linked chitosan (CCTS) showed excellent ability and selectivity for the adsorption of germanium at pH 6 to 9. The adsorption capacity of the resin for germanium (IV) was found to be 106 mg g^− 1 resin, whereas the adsorption rate constant was 9.82 × 10^− 2 min^− 1. Through the column treatment, alkali and alkaline earth matrices in river water and seawater matrices could be completely removed. The resin can also successfully remove chloride and selenium that can interfere with the direct determination of germanium by ICP-MS. The applicability of the CCTS-DPA resin was further demonstrated for the collection/preconcentration of germanium in environmental water samples and its determination by ICP-MS. The concentrations of germanium in tap water, river water and seawater samples were found in the range of 0.011 to 0.022 μg L^− 1.     

Determination of seven arsenic species in seafood by ion exchange chromatography coupled to inductively coupled plasma-mass spectrometry following microwave assisted extraction: method validation and occurrence data

The determination of seven arsenic species in seafood was performed using ion exchange chromatography on an IonPac AS7 column with inductively coupled plasma mass spectrometry detection after microwave assisted extraction. The effect of five parameters on arsenic extraction recoveries was evaluated in certified reference materials. The recoveries of total arsenic and of arsenic species with the two best extraction media (100% H₂O and 80% aqueous MeOH) were generally similar in the five seafood certified reference materials considered. However, because MeOH co-elutes with arsenite, which would result in a positively biased arsenite concentration, the 100% H₂O extraction conditions were selected for validation of the method. Figures of merit (linearity, LOQs (0.019-0.075 mg As kg⁻¹), specificity, trueness (with recoveries between 82% (As(III)) and 104% (As(V) based on spikes or certified concentrations), repeatability (3-14%), and intermediate precision reproducibility (9-16%) of the proposed method were satisfactory for the determination of arsenite, monomethylarsonic acid, dimethylarsinic acid, arsenate, arsenobetaine and arsenocholine in fish and shellfish. The performance criteria for trimethylarsine oxide, however, were less satisfactory. The method was then applied to 65 different seafood samples. Arsenobetaine was the main species in all samples. The percentage of inorganic arsenic varied between 0.4-15.8% in shellfish and 0.5-1.9% at the utmost in fish. The main advantage of this method that uses only H₂O as an extractant and nitric acid as gradient eluent is its great compatibility with the long-term stability of both IEC separation and ICP-MS detection.     

ICP-MS法测定高纯钛中痕量元素

建立了ICP-MS直接测定高纯钛中Be,V,Co,Ni,Ga,Mo,Nb,Cd,Sb,TI,Pb的分析方法,并对ICP-MS工作参数及条件进行了优化和选择.高纯钛用HF与HNO3溶解后加入Sc、Cs、Re内标,用ICP-MS直接检测.方法的检出限为0.03～0.1 ng/mL,测定下限为0.2～0.5 ng/mL,各元...     

反相离子对色谱-电感耦合等离子体质谱法测定化妆品中不同形态的铬

建立了反相离子对色谱(RP-IPC)与电感耦合等离子体质谱(ICP-MS)联用技术快速分离测定化妆品中Cr(III)和Cr(VI)的方法。样品经乙二胺四乙酸钠盐(EDTA)50 ℃水浴中提取后,采用XDB-C18色谱柱分离,以5%(v/v)甲醇-2.0 mmol/L四正丁基铵盐(TBA)水溶液(pH 6.0)作为流动相,流速为1.0 mL/min,进样量为100 μL。采用碰撞池技术消除ICP-MS测定时40Ar12C+、35Cl16O1H+对52Cr+的光谱学干扰。Cr(III)和Cr(VI)的分离过程在5 min内完成。样品中加标量为0.01～0.50 μg时,其回收率为82.7%～107.2%,相对标准偏差(RSD)小于5.62%。该方法操作简便、灵敏度高、重现性好,适合于化妆品中Cr(III)和Cr(VI)的同时分析。     

高效液相色谱-电感耦合等离子体质谱联用同时测定鸡肉与鸡肝中的7种砷形态

建立了一种同时测定阿散酸、亚砷酸根、砷酸根、砷胆碱、砷甜菜碱、一甲基砷和二甲基砷等7种砷形态的高效液相色谱-电感耦合等离子体质谱分析方法。样品采用人工胃液作为提取液进行超声处理,再以碳酸铵溶液和水作为流动相,采用阴离子分析柱将样品提取液进行分离,最后进入电感耦合等离子体质谱测定。各砷形态在1～50 μg/kg范围内线性关系良好,相关系数r2均在0.999以上;在1、2、10 μg/kg 3个添加水平进行了方法学验证,平均回收率为84.3%～106.6%,相对标准偏差为1.4%～4.2%; 7种砷形态的定量限均为1 μg/kg。方法重现性好、灵敏度高、前处理简单,适用于鸡肉和鸡肝中主要有机砷和无机砷残留的分析检测。     

微波消解/ICP MS法测定不同地点虎耳草中16种元素含量

利用微波消解/ICP-MS法对3个地点虎耳草中16种元素进行了含量测定.结果表明,不同地点虎耳草元素的含量相差较大,虎耳草中Ca元素与海拔高度呈线性关系.该法的加样回收率在95.3%～105.0%之间,相对标准偏差在0.98%～2.82%之间,具有较高的准确度和精确度.结果为虎耳草的药效性和药理毒理提供了理论依据.     

Separation and determination of arsenic species in water by selective exchange and hybrid resins

A simple and efficient method for separation and determination of inorganic arsenic (iAs) and organic arsenic (oAs) in drinking, natural and wastewater was developed. If arsenic is present in water prevailing forms are inorganic acids of As(III) and As(V). oAs can be found in traces as monomethylarsenic acid, MMA(V), and dimethylarsenic acid, DMAs(V). Three types of resins: a strong base anion exchange (SBAE) and two hybrid (HY) resins: HY-Fe and HY-AgCl, based on the activity of hydrated iron oxides and a silver chloride were investigated. It was found that the sorption processes (ion exchange, adsorption and chemisorptions) of arsenic species on SBAE (ion exchange) and HY resins depend on pH values of water. The quantitative separation of molecular and ionic forms of iAs and oAs was achieved by SBAE and pH adjustment, the molecular form of As(III) that exists in the water at pH <8.0 was not bonded with SBAE, which was convenient for direct determination of As(III) concentration in the effluent. HY-Fe resin retained all arsenic species except DMAs(V), which makes possible direct measurements of this specie in the effluent. HY-AgCl resin retained all iAs which was convenient for direct determination of oAs species concentration in the effluent. The selective bonding of arsenic species on three types of resins makes possible the development of the procedure for measuring and calculation of all arsenic species in water. In order to determine capacity of resins the preliminary investigations were performed in batch system and fixed bed flow system. Resin capacities were calculated according to breakthrough points in a fixed bed flow system which is the first step in designing of solid phase extraction (SPE) module for arsenic speciation separation and determination. Arsenic adsorption behavior in the presence of impurities showed tolerance with the respect to potential interference of anionic compounds commonly found in natural water. Proposed method was established performing standard procedures: with external standard, certified reference material and standard addition method. Two analytical techniques: the inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectroscopy-hydride generation (AAS-GH) were comparatively applied for the determination of arsenic in all arsenic species in water. ICP-MS detection limit was 0.2 μg L⁻¹ and relative standard deviation (RSD) of all arsenic species investigated was between 3.5 and 5.1%.     

OFFGEL isoelectric focusing and polyacrylamide gel electrophoresis separation of platinum-binding proteins

In this work a 2D electrophoretic separation procedure able to maintain the integrity of platinum-protein bonds has been developed. The method is based on the use of sequential OFFGEL isoelectric focussing (IEF) and PAGE. A systematic study of the reagents used for PAGE, for OFFGEL-IEF separation, and post-separation treatment of gels (such as enzymatic digestion and sample preparation for MS analysis) was tackled regarding their suitability for the identification of platinum binding proteins using standard proteins incubated with cisplatin. The distribution of platinum in high and low molecular weight fractions (separated by cut-off filters) was determined by ICP-MS, which allows evaluating platinum-protein bond stability under the conditions studied. SDS-PAGE in the absence of β-mercaptoethanol or dithiotreitol preserved the platinum-protein bonds. In addition, neither the influence of the electric field during the electrophoretic separation, nor the processes of fixing, staining and destaining of proteins in the gel did result in the loss of platinum from platinum binding proteins. SDS-PAGE under non-reducing conditions provides separation of platinum-binding proteins in very narrow bands with quantitative recoveries. Different amounts of platinum-bound proteins covering the range 0.3-2.0 μg were separated and mineralised for platinum determination, showing good platinum linearity. Limits of detection for a mixture of five standard proteins incubated with cisplatin were between the range of 2.4 and 13.9 pg of platinum, which were satisfactory for their application to biological samples. Regarding OFFGEL-IEF, a denaturing solution without thiourea and without dithiotreitol is recommended. The suitability of the OFFGEL-IEF for the separation of platinum binding proteins of a kidney cytosol was demonstrated.     

Characterization of silver nanoparticles using flow-field flow fractionation interfaced to inductively coupled plasma mass spectrometry

The ability to detect and identify the physiochemical form of contaminants in the environment is important for degradation, fate and transport, and toxicity studies. This is particularly true of nanomaterials that exist as discrete particles rather than dissolved or sorbed contaminant molecules in the environment. Nanoparticles will tend to agglomerate or dissolve, based on solution chemistry, which will drastically affect their environmental properties. The current study investigates the use of field flow fractionation (FFF) interfaced to inductively coupled plasma-mass spectrometry (ICP-MS) as a sensitive and selective method for detection and characterization of silver nanoparticles. Transmission electron microscopy (TEM) is used to verify the morphology and primary particle size and size distribution of precisely engineered silver nanoparticles. Subsequently, the hydrodynamic size measurements by FFF are compared to dynamic light scattering (DLS) to verify the accuracy of the size determination. Additionally, the sensitivity of the ICP-MS detector is demonstrated by fractionation of μg/L concentrations of mixed silver nanoparticle standards. The technique has been applied to nanoparticle suspensions prior to use in toxicity studies, and post-exposure biological tissue analysis. Silver nanoparticles extracted from tissues of the sediment-dwelling, freshwater oligochaete Lumbriculus variegatus increased in size from approximately 31-46nm, indicating a significant change in the nanoparticle characteristics during exposure.