壳管相变蓄热器强化传热实验研究

为了强化相变蓄热器传热性能,本文设计了三种新型壳管相变蓄热器结构,并对其换热性能进行实验研究。结果表明:在蓄热器内部添加分层结构和斜翅片换热性能最高,内部温度达到均匀化的时间随换热单元数增加而增大;换热管道间翅片的添加可有效地强化换热效果,改善蓄热器内部出现的温度严重分层现象,温度分布更加均匀;在研究范围内,换热流体温度的增加可有效提高蓄热器的换热效率,缩短相变时间。     

不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界，避免生成复杂贴体网格及动网格，极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法，将简化附加体积力以源项形式嵌入动量方程迭代中，通过用户自定义函数对CFD软件FLUENT二次开发，实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证，并探讨了插值函数对计算精度的影响。研究表明，通过引入浸入边界模型，能够提高计算效率，并实现结构网格背景下复杂边界和动边界的高效建模。     

电像法求解线电荷与带有半圆柱凸起的接地平板导体形成的电势和电场

利用电像法求解了线电荷与带有半圆柱凸起的接地导体平板形成的电势、电场分布,讨论了导体表面电荷分布特征,并用Matlab软件绘出了等势图.     

壳模型哈密顿量本征值的美与奇

本征值问题是自然科学中基本运算之一，对于超大矩阵的对角化是当今许多科学问题的瓶颈。在应用原子核壳模型理论研究较重的原子核结构时，因为壳模型组态太大，通常的方法是基于各种物理考虑做某些组态截断，另一个思路是利用新的算法和飞速发展的计算机资源对这些大矩阵对角化或者近似对角化。总结了本课题组近年来在壳模型哈密顿量本征值近似方面研究的主要结果，包括最低本征值半经验公式及多种外推方法、本征值与对角元的相关性等。The eigenvalue problem is one of the fundamental issues of sciences. Many research fields have been challenged by diagonalizing huge matrices. The nuclear structure theorists face this problem in studies of medium-heavynuclei in terms of the nuclear shell model, in which the configuration space is too gigantic to handle. Thus one usually truncates the nuclear shell model configuration space based on various considerations. Another approach is to make use of super computers by various algorithms, and/or to obtain approximate eigenvalues. In this paper we review our recent efforts in obtaining approximate eigenvalues of the nuclear shell model Hamiltonian, with the focus on our semi-empirical approach and a number of extrapolation approaches towards predicting the lowest eigenvalue, as well as strong correlation between the sorted eigenvalues and the diagonal matrix elements, and so on.     

压电曲壳结构的形状控制和优化设计

研究了使用最少和最合理的压电片布置,以及最合理的多点输入电压,对曲壳类结构实施最佳的形状控制.首先,采用HS-ANS法,构造能够克服剪切自锁、梯形自锁和厚度自锁的压电曲壳结构实壳单元.然后,利用遗传算法的组合优化,对作动器的数目和位置进行设计,进一步利用遗传算法的数值优化,对各作动器的作用电压值进行优化,并给出一般计算过程.最后的算例表明,给出的实壳单元和优化设计方法,可以非常有效地实现对曲壳类结构的形状控制.     

功能化超薄壳层隔绝银/聚邻巯基苯胺纳米粒子的简易合成（英文）

本文通过简单的一步合成法制备出了壳层隔绝的银/聚邻巯基苯胺纳米粒子。制得的邻巯基苯胺壳层符合设计要求,并且,仅通过改变加入表面活性剂十二烷基硫酸钠的量便可调控壳层厚度,所得2nm厚度的壳层均一、无针孔且具氨基功能化。鉴于银核的超强等离子共振效应,当这种具有超薄壳层的银/聚邻巯基苯胺纳米粒子作为表面增强拉曼的基底材料时,可获得极强的拉曼增强信号。     

破片撞击起爆柱面带壳装药的临界速度修正判据

为获得适用于柱面带壳装药的冲击起爆修正判据，以Picatinny工程判据为基础加入修正项进行修正。采用AUTODYN-3D软件对破片撞击柱面带钢壳的B炸药进行数值计算，获得了破片入射角、装药曲率半径对炸药临界起爆速度的影响规律；通过拟合得到修正项表达式，建立了考虑破片入射角、柱壳装药形状函数的炸药起爆临界速度修正判据。判据计算值与实验数据和数值计算值吻合较好，该判据能较好的预测柱形带壳装药的冲击起爆条件。     

Effects of ultra-strong magnetic field on electron capture rates of 55C0 and 56Ni in the magnetar surrounding

The electron capture rates of 55Co and 56Ni in the ultra-strong magnetic field at four typical temperature- density points have been calculated using the nuclear shell model and Landan energy levels quantized approximate correction. The results show that the electron capture rates of 55Co and 56Ni are increased greatly in the ultra-strong magnetic field, and even exceed two orders of magnitude in the range from 4.414×10^13G to 2.207×10^27 G. The change rate of electron abundance, ye, of 55Co and 56Ni under the condition of B=4.414×10^15G in the magnetar surrounding has been calculated and discussed, the proportions of ye of 55Co and 56Ni in the total Ye have been reduced by 50 percent in all more than the condition without a magnetic field.     

基于物理中面FGM板屈曲的有限元分析

基于物理中面的概念，根据最小势能原理推导了功能梯度材料FGM薄板屈曲的有限元控制方程，求得临界荷载的有限元解。利用FGM板的屈曲方程与参考均匀板的屈曲方程之间的相似性，建立了FGM板的临界荷载与参考均匀板的临界荷载之间的相似转换关系式，从而将FGM板临界荷载的计算转变为参考均匀板的临界荷载和材料不均匀系数的计算，极大地提高了计算效率，为FGM的推广起积极的推动作用。通过数值算例，将由有限元法和转换关系式得到的临界荷载进行了比较，并讨论了边界条件、荷载工况、材料组成和几何尺寸等对FGM板临界荷载的影响。     

STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.