Ce:Cu:BSO晶体的生长及其相位共轭效应的研究

本文报道了Ce:Cu:BSO晶体的生长。测试了晶体相位共轭反射率和响应时间。利用Ce:Cu:BSO晶体二波耦合相位变化,实现了畸变的波前相位的畸变消除。     

硼酸对亚微米级Ca3Sc2Si3O12:Ce绿色荧光粉的制备及发光性能的影响

采用凝胶-燃烧法合成了Ca₃Sc₂Si₃O₁₂ ∶Ce绿色LED用荧光粉,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光光谱仪等对合成产物进行了分析和表征.结果表明:通过添加H₃BO₃做助熔剂,制得的荧光粉晶相纯正,颗粒形貌均呈现为较规则的类球形,而且所得荧光粉的粒径均小于1 μm.发射光谱呈现为一宽带,发射主峰位于505 nm,该宽峰对应于Ce³⁺关键词： 白光LED 荧光粉 3Sc₂Si₃O₁₂ ∶Ce')" href="#">Ca₃Sc₂Si₃O₁₂ ∶Ce 发光     

以(NH_4)_2Ce(NO_3)_6氧化体系合成己二酰-1′,6′-双(4-卤偶氮苯)

以自制的己二酰-1′,6′-双(4-卤苯肼)化合物为原料,在室温条件下用(NH4)2Ce(NO3)6氧化体系氧化脱氢得3种己二酰-1′,6′-双(4-卤偶氮苯)化合物。产品的结构经元素分析、IR、1H NMR确证。产率在89%—93%之间。     

真空紫外光激发下Ce3+、Tb3+激活的BaCa2(BO3)2的发光性质

利用XRD、VUV及UV光谱等方法对Ce³⁺、Tb³⁺离子掺杂以及Ce³⁺、Tb³⁺离子共掺的3种BaCa₂(BO₃)₂荧光粉的相纯度、发光性质、浓度猝灭现象进行研究。结果表明:3种荧光粉在VUV波段有较好的吸收,基质吸收带位于140～190 nm范围。Ce³⁺在BaCa₂(BO₃)₂的最低4f5d跃迁带位置在360 nm附近,其5d→²F_J(J=5/2, 7/2)发射峰分别位于393,424 nm。Tb³⁺掺杂的样品在172 nm激发下的发射光谱由4个窄带组成,分别对应⁵D₄→⁷F_J(J=3,4,5,6)的跃迁,其中占主导位置的是⁵D₄→⁷F₅的跃迁,大约位于543 nm处,主要为绿光发射。在Ce³⁺,Tb³⁺离子共掺杂的BaCa₂(BO₃)₂光谱中,观察到Ce³⁺-Tb³⁺离子间有能量传递。     

Ba10(PO4)4(SiO4)2∶Eu2+荧光体的光谱特性

采用高温固相法合成了荧光体Ba₁₀（PO₄）₄（SiO₄）₂：Ce³⁺和Ba₁₀（PO₄）₄（SiO₄）₂：Eu²⁺,研究了两种荧光体的光谱特性。结果表明,两者都呈现较强的宽带激发特征。根据同种基质中Eu²⁺和Ce³⁺两种离子光谱特征的相关性,通过测得的Ba₁₀（PO₄）₂（SiO₄）₂基质中Ce³⁺的光谱数据估算了Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺中Eu²⁺的斯托克斯位移（ΔS）和激发能量,估算结果与Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺样品的光谱分析结果十分吻合。Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺可以同时被紫光和蓝光激发,发出偏白的绿光,可用作白光LED的荧光粉。     

ChemInform Abstract: Intermetallic Compounds Ce4Ru3Ga3 and La3Ru2Ga2 with Crystal Structures of New Types.

Ce₄Ru₃Ga₃ (I) and La₃Ru₂Ga₂ (II) are synthesized by arc melting of the elements under Ar followed by annealing (873 K, 30 d).     

Ion beam mixing induced by electronic energy deposition in Fe-Si multilayers

Abstract

Spectroscopic properties of Ce³⁺ ions in GdAlO₃ crystal are presented. At least three Ce³⁺ nonequivalent centres (multisites) are present in this crystal. Energy transfer from the Ce³⁺ main in the UV emitting centres to the Ce³⁺ green emitting centres is observed. Ce³⁺ fluorescence decays are either fast (1.5–20 ns) or slower due to complicated processes of energy transfer and migration (Ce³⁺)_i → (Gd³⁺)_n-steps → (Ce³⁺)_j (energy transfer through Gd³⁺ sublattice).     

Real‐time Probing the Formation of [M(2,2‐bipyridine)2(NO3)3] (M = Ce,La, Tb) Complexes and Influence of Synthesis Parameters

Despite the strong technological importance of lanthanide complexes, their formation processes are rarely investigated. This work is dedicated to determining the influence of synthesis parameters on the formation of [Ce(bipy)₂(NO₃)₃] as well as Ce³⁺‐ and Tb³⁺‐substituted [La(bipy)₂(NO₃)₃] (bipy = 2,2′‐bipyridine) complexes. To this end, we performed in situ luminescence measurements, synchrotron‐based X‐ray diffraction (XRD) analysis, infrared spectroscopy (IR), and measured pH value and/or ion conductivity during their synthesis process under real reaction conditions. For the [Ce(bipy)₂(NO₃)₃] complex, the in situ luminescence measurements initially presented a broad emission band at 490 nm, assigned to the 5d→4f Ce³⁺ ions within the ethanolic solvation shell. Upon the addition of bipy, a red shift to 700 nm was observed. This shift was attributed to the changes in the environment of the Ce³⁺ ions, indicating their desolvation and incorporation into the [Ce(bipy)₂(NO₃)₃] complex. The induction time was reduced from 8 to 3.5 min, by increasing the reactant concentration by threefold. In contrast, [La(bipy)₂(NO₃)₃] crystallized within days instead of minutes, unless influenced by high Ce³⁺ and Tb³⁺ concentrations. Monitoring and controlling the influence of the reaction parameters on the structure of emissive complexes is important for the development of rational synthesis approaches and optimization of their structure‐related properties like luminescence.     

磷灰石结构荧光粉Ba10(PO4)6F2:Ce3+,Tb3+的合成、发光和能量传递

采用高温固相法合成了系列Ce~(3+)和Ce~(3+)/Tb~(3+)激活的具有磷灰石结构荧光粉Ba_(10)(PO_4)_6F_2。用X射线衍射(XRD)、扫描电镜(SEM)、激发和发射(PLE和PL)光谱对样品进行了表征分析。研究结果表明:所合成的荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)具有氟磷灰石结构,样品微观呈现不规则形貌。荧光粉Ba10-x(PO4)6F2∶x Ce~(3+)的相对发射强度随着x增加而增强,当x=0.09时,荧光强度达到最大。荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的激发光谱为240～330 nm的宽带,发射光谱呈现出Ce~(3+)的5d→4f跃迁紫外光(335和358 nm)发射和Tb~(3+)的4f→4f跃迁绿光(542 nm)发射。光谱特性表明,发光过程中存在Ce~(3+)→Tb~(3+)能量传递,能量传递效率可以达到60%。计算Ce~(3+)和Tb~(3+)的临界距离为0.79 nm,能量传递机理是偶极-偶极交互作用。此外,详细论述了Ce~(3+)和Tb~(3+)之间的能量传递和发光的过程。通过调节Tb~(3+)的掺杂浓度,对荧光粉发光色坐标与Tb~(3+)的掺杂浓度之间的关系也进行了研究,随着Tb~(3+)的掺杂量从0增加0.52,荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的发射光谱色坐标可以从(0.149 4,0.045 1)蓝色区变化到(0.280 1,0.585 3)绿色区。