液态丙烯腈低聚物修复聚丙烯腈基碳纤维微孔缺陷

提出一种全新的缺陷修复的方法,即将聚丙烯腈基(PAN)碳纤维T300在液态丙烯腈低聚物(LAN)中浸渍后,再进行预氧化和碳化热处理,可以将T300的拉伸强度提高25%.应用二维小角X射线散射(SAXS)法可以计算出LAN修复缺陷前后T300微孔缺陷的长度(L)、横截面尺寸(lp)、取向角(Beq)、相对体积(Vrel)的变化,结果表明碳纤维的拉伸性能越好,微孔的长度、取向角、相对体积含量越小.T300拉伸性能的提高是由于缺陷修复的结果.应用BET比表面积法、扫描电子显微镜(SEM)表征LAN修复缺陷前后T300的比表面积以及表面形貌的变化,结果表明,T300在LAN中浸渍并经过预氧化和碳化热处理,比表面积变小,表面缺陷明显减少.进一步验证LAN对碳纤维中的微孔缺陷具有修复作用.应用X射线光电子能谱(XPS)法表征LAN修复前后T300表面化学成分的变化,结果表明,LAN修复后含氧官能团(C―OH,C=O,HO―C=O)显著增加,有利于增强碳纤维与树脂基体之间的相互作用,从而提高碳纤维的力学性能.     

金红石相TiO_2纳米棒的氢化处理及其光催化活性

以钛酸四丁酯为钛源,通过盐酸调制的水热法制备出了具有棒状结构的金红石相纳米TiO2,并进一步进行高温氢化处理.采用X射线衍射(XRD),透射电镜(TEM),紫外-可见-近红外漫反射(UV-Vis-NIR DRS),电子顺磁共振(EPR)和表面光伏(SPS)等测试手段对样品进行表征,以气相乙醛和液相苯酚为目标污染物考察催化剂的光催化活性.结果表明:随着高温氢化处理时间的延长,TiO2样品的可见光吸收逐渐增强,其颜色逐渐由白色转变成灰色,这主要与引入的Ti3+/氧空位缺陷有关.表面光电压谱和羟基自由基测试表明,适当时间的氢化处理有利于光生电荷的分离.在光催化氧化降解气相乙醛和液相苯酚过程中,经适当时间氢化处理的样品表现出高的可见光催化活性.并且可见光催化活性的规律与紫外光下的是一致的.这是因为氢化处理后在导带底下方引入了缺陷能级,拓展了可见光响应.过度的氢化处理会在TiO2导带下方引入较低的缺陷能级,使光生电荷的复合加剧,导致光催化活性降低.     

THREE-DIMENSIONAL NUMERICAL LOCALIZATION OF IMPERFECTIONS BASED ON A LIMIT MODEL IN ELECTRIC FIELD AND A LIMIT PERTURBATION MODEL

From a limit model in electric field obtained by letting the frequency vanish in the time-harmonic Maxwell equations, we consider a limit perturbation model in the tangential boundary trace of the curl of the electric field for localizing numerically certain small electromagnetic inhomogeneities, in a three-dimensional bounded domain. We introduce here two localization procedures resulting from the combination of this limit perturbation model with each of the following inversion processes： the Current Projection method and an Inverse Fourier method. Each localization procedure uses, as data, a finite number of boundary measurements, and is employed in the single inhomogeneity case; only the one based on an Inverse Fourier method is required in the multiple inhomogeneities case. Our localization approach is numerically suitable for the context of inhomogeneities that are not purely electric. We compare the numerical results obtained from the two localization procedures in the single inhomogeneity configuration, and describe, in various settings of multiple inhomogeneities, the results provided by the procedure based on an Inverse Fourier method.     

孔洞和孪晶界对银纳米线形变行为联合影响的分子动力学模拟

Based on molecular dynamics simulations, the plastic deformation of silver nanowires under uniaxial tension has been studied systematically. In this paper, the mechanical properties of [111]-oriented twin nanowires with different hole sizes have been studied. The existence of holes has no effect on the elastic deformation stage. The hole on the twin boundary has two main roles in the plastic deformation stage. During the initial stages of plastic deformation, the main function of the hole is to produce new dislocations as dislocation sources at small hole sizes.Upon increasing the hole size, the main effect changes to stop dislocation slip. During the late stages of plastic deformation, the two functions of the hole complement each other, upon increasing the hole size, the function of the hole as dislocation sources becomes obvious, leading to weakening of the plasticity of the nanowires.     

Structural,Magnetic and Magnetocaloric Properties of La-deficient La0.77-xSrxCa0.2MnO2 Perovskites

La-deficient La0.77-x Ca0.2SrxMnO3 （0 〈 x 〈 0.1） polycrystalline samples are synthesized using the sol-gel technique. The crystal structures of all the samples are single orthorhombic phase with Pbnm space group. Rietveld analysis of x-ray diffraction patterns shows that the Mn-O-Mn bond angle θUn-O-Mn increases whereas the Mn-O bond length dMn--o decreases monotonically with increasing Sr^2＋ content, which results in a rich overlap between Mn 3d and O2p orbitals and leads to a systematic increase of the Curie temperature in this compound. It is found that the magnetic entropy change has a maximum at x = 0.06 in La^3＋-deficient La0.77-xCa0.2SrxMnO3. This may result from competition between the super-exchange interactions （Mn 4＋-O2--Mn4＋） and double-exchange interactions （Mn^3＋-O^2- -Mn^4＋） originating from the appearance of superfluous Mn^4＋ ions by substitution of Sr^2＋ for La^3＋ in this series. Large magnetic entropy changes of 2.32 and 1.83Jkg^-1K^-1 in the x = 0.06 and x = 0.1 samples at their Tcs of 271 K and 303K upon a low magnetic field （10kOe） make these materials promising candidates at near room temperature.     

你知道自己的性格缺陷吗？

一个人的性格决定着其社交方式、学习方式、处事方式等等。我们很多的烦恼表面看都事出有因，其实大部分是自己的性格所致。每个人性格里多少会带点不好的因子，我们必须正视它，然后努力去改变。做做下面的测试，找找你性格中的缺陷吧!     

对中考物理试题缺陷的分析

中考是学生初中阶段学习结果的终端显示,是高中阶段学校招生选拔学生的依据.因此,中考试题对教学质量和初中阶段教学工作有积极的指导性、调控性和激励性.随着课改的不断推进,全国各地的中考物理试题整体日益向着坚持以学生为本,切实体现素质教育的方向发展.但也有少数中考物理试题存在着一些明显的缺陷,值得我们思考和改进.     

美国科学家首次研制成功人造骨髓

美国密歇根大学的一个实验室首次研制成功人造骨髓，可以在试管中源源不断地制造出红细胞和白细胞。此项科研成果对于研究抗癌药物、简化药物检测、研究免疫系统缺陷以及输血用血液的不间断供应等创造了条件。     

一维固-液掺杂声子晶体缺陷模的机理研究

建立了一维固-液掺杂声子晶体的谐振腔模型,利用谐振腔的共振条件推导出了缺陷模频率满足的解析公式,从理论上解释了产生一维固-液掺杂声子晶体缺陷模的物理机理.利用频率的解析公式研究了缺陷模的频率随入射角、杂质厚度、杂质波速的变化规律.结果表明:缺陷模的频率随入射角和杂质波速的增加而增加,缺陷模的频率随杂质厚度的增加而减少,圆满地解释了一维固-液掺杂声子晶体缺陷模的变化规律.在此基础上并与转移矩阵法的计算结果进行了比较,其结果吻合.